lathes used for sale

Screw-cutting lathe 1a667, good technical condition, low wear, 100% set. ... more information

number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

The machine is in good technical condition. Revolving diameter above bed: 320mm Distance between spikes: 1250mm New belt. New electric motor. The lathe has two main gears, the others are controlled by a new frequency converter (5.5 kW), which is strong and fast. By prior arrangement, the possibility of a tour in progress.

The massive, one-piece bed is made of high quality Meehanite cast iron. The bed is equipped with an additional guide to ensure greater rigidity, the total width between the guides is 800 mm. The caliper is also equipped with an additional guide for heavy cutting applications. The guides are hardened, carefully ground and coated with Turchite B.

Machine weight: 11900 kg Total machine input:: 30 kW Circulating diameter above the bed: 1250 mm Revolving diameter above support: 940 mm Distance between spikes: 8000 mm Spindle drilling: 102 mm Max. workpiece weight: 6000 kg Clamping plate diameter: : 1250 mm Machine dimensions lxwxh: 10800x1970x2000 mm

Takisawa Nex 108 CNC Lathe Max turning diameter (mm) 320 Max tuning length (mm) 481 2004 model takisawa 108 nex machine is in working condition in our factory There is no problem, it is a machine that works smoothly according to its model, we sell it to buy a bigger machine, it can be seen on site.

number of spindles:6 spindle passage:51 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: S51 PCYob: 2008Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmhirth-coupled spindle drum,Control: Software SICS 2000 / Windows 2000 / Beckhoff TwincatPosition I: cross slide X-I; longitudinal slide Z-IPosition II: compound slide cross XZ-II; longitudinal slide Z-IIPosition III: compound slide cross XZ-III; longitudinal slide Z-IIIPosition IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IVPosition V: cross slide X-V; compound slide longitudinal ZX-VPosition VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VICoolant tank with hinged belt chip conveyor;Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar;Workpiece collecting device with belt conveyor (low-damage workpiece ...

number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.

Article: CNC LatheManufacturer: SpinnerType: SB-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC LatheManufacturer: SpinnerType: BK-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Hand-, Cycle- and CNC-Lathe Manufacturer: DMT KernType: CD480Control: HaidenhainYear of construction: 2000Machine has processed plasticLead screw and/or lock case must be overhauledSale without tool holder!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

turning diameter:200 mmswing diameter:260 mmturning height:200 mmTool table:1054 x 400 mmDimensions (L/W/H):2200 x 2300 x 2300 mmweight:3300 kgslide travel radial ( X-axis ):520 mmslide travel axial ( Z-axis ):200 mmno pallet circulating belt, no C-axis, no driven tools  ... more information

turning diameter:1600 mmturning length:12000 mmcontrol:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories.For further technical data and accessories, pls browse the Appendix.Parallellathe WMWmod. 4 GUIDE-WAYS¦ CNC: FAGOR 8050¦ bed: monolithic¦ centres height: 800 mm¦ centres distance: 12000 mm¦ swing over cross-slide: 1250 mm¦ turret: automatic 4 positions¦ tailstock: motorized¦ tailstock connection: hydraulic¦ platform: diam. 1000 mm¦ steady rests: nr.02¦ chip conveyorWarranty: noneTake advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

turning diameter:1390 mmturning length:14000 mmweight of the machine ca.:13 tMore information can be found in the Appendix. ... more information

turning diameter:950 mmswing diameter:1200 mmturning height:800 mmfaceplate diameter:800 (hydr.) mmspindle drive:37/45 kWweight of the machine ca.:16,5 tdimensions of the machine ca.:4600x5500x5330 mmnew machine ex stock Taiwan with: Max. Swing Diameter 1200mmMax. Turning Diameter 950mmMax. Turning Height 800mmFANUC 0iTD Control System High Pressure Pump(7kg/cm2 ) Auto Luberication System Tool Holder BT50 for RAM Main Spindle Motor 37/45kw X Axis AC Motor 4.0 kw Z Axis AC Motor 7.0 kwC-axis Motor a8 7.5/11kw+MZI(0-2400RPM) Brake System for spindle X Axis Rapid Feedrate 20 m/min Z Axis Rapid Feedrate 20 m/min X Axis Travel :645 mm Z Axis Travel :800mm ATC Tools 12 Tools Spindle Nose A2-15 ZF Gear box Germany Chip Conveyor & chip car Oil/water separator Hydraulic system 3 Jaw Power Chuck 32" Hydraulic Unit Work Light Auto Lubrication SystemPower requirment 75KVAMachine Size :428028004680mm ...

turning diameter:620 mmturning length:2000 mmcontrol:FAGOR 8055 max. swing over slide:410 mmbed width:350 mmspindle drive:17 kWspindle taper:A2-8 ASAspindle speeds:0-2500 1/min.spindle bore:105 mmtailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmrapid traverse x/z:15/12,5 m/minweight of the machine ca.:3,5 tdimensions of the machine ca.:3940 x1350x1810 mmautomatic tool changer:PRAGATI; aut. Revolver mit angetr. Stationen DTT80 12 POS. fachtools:1 Satz servo spindle motor:von FAGOR sowie Achsmotoren von FAGOR fixed steady rests:1 Stk.live center:1 Stk.follower rest:1 Stk.3 jaw chuck Ø:315 (hydr.) mmNew CNC lathe KRAFT KT 285/2000 with Fagor 8055.Made in Europe, Picture similiar.For more information please see the attached documents

turning diameter:1010 mmturning length:3000 mmcontrol:Fanuc 0ITF max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 spindle speeds:0-1400 1/min.spindle bore:130 mmtransmission ratio:2 tailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKmax. length of work piece:5000 mmrapid traverse x/z:10/10 m/minpower requirement:22 kWweight of the machine ca.:10.000 kgdimensions of the machine ca.:5325x1800x2230 mmautomatic tool changer:12-fach Y-axis:über Werkzeugrevolver Y TBYR250-12 BMT75 mm3-jaw hydraulic chuck:500 mmCNC controller:Fanuc 0ITF tools:1 Satz fixed steady:Option mmNew CNC lathe KRAFT ST 500/5000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:1000 mmcontrol:Fanuc Oi-TF turning diameter over bed slide:300 mmmax. swing over slide:190 mmbed width:250 mmspindle taper:A2-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200 kgdimensions of the machine ca.:2250x1115x1630 mmautomatic tool changer:8-fach CNC controller:Fanuc Oi-TF tools:1 Satz foundation bolts:1 Satz New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

turning diameter:1500 mmturning length:4500 mmx-travel:1000 mmy-travel:350 mmz-travel:5000 mmswing diameter over face slide:1500 mmA lathelike new. It was a mispurchase for the intended application.3.000 Program working hours /New C-AxesFour-lane guide concept with lateral cross slide for full traversability of the steady rests and superstructures.

turning diameter:1010 mmturning length:4000 mmcontrol:FANUC OI TF max. swing over slide:718 mmbed width:500 mmspindle taper:A2-15 spindle speeds:0-1400 1/min.spindle bore:130 mmtransmission ratio:2 tailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKmax. length of work piece:4000 mmrapid traverse x/z:10/10 m/minpower requirement:22 kWweight of the machine ca.:9500 kgdimensions of the machine ca.:6557x2202x2487 mmmax. workpiece weight between centers:8600 kgautomatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz coolant system:6 barNew CNC lathe KRAFT ST 500/3000 with FANUC OI TFMade in EuropeFor more information please see the attached documents