rubber machines used for sale

clamping force: 2700 kNinjection volume: 3300 cm³screw diameter: -- mmplaten size: 780 x 670 mmCondition: used,Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused!clamping unit:- Euromap (size): 2700-7200- Clamping force: 2,700 kN- Heating platen size L/W/H: 780 x 670 mm- Distance between upper and lower platen: 970 mm- Stroke min.: 420 mm- Stroke: 550 mmInjection unit:- Injection volume max.: 3,300 cm³- Injection pressure: 2,180 bar- Nozzle contact force: 80 kN- Connected load: 3x 400 V, 50 Hz, N- Back-up fuse: 125 A- Pump drive: 265 bar- Drive power: 22 kW- Pump speed: 66 rpm- C ...

available 35" Mill on Baseframe more details in attached description!  ... more information

Speed: Infinitely variable via new frequency converter Fixed roller: 1 - 14.9 rpm = 2 - 28 m/min Adjustment roller: 1 - 17.5 rpm = 2 - 33 m/min Gap adjustment with manual actuation via worm gear, conversion to electromotive gap adjustment can be offered  ... more information

BERSTORFF GmbH Mixing mill for all types of rubber compounds Roll width 120 cm Roll diameter 55 cm Machine in very good condition !  ... more information

Friction 1 : 1.23, gap adjustment manually by spindles, splat display on scale on the adjustment spindle, simple contactor control with brake motor, machine in good condition, ready for operation, safety in actual condition  ... more information

available Textile Calendar Complete Line - 2 x let-off, Splicing press, Accumulator, Tension unit, Heting Drums, Calender with thickness measuring, Cooling Drums, Thickness meas. (final product), Accumulator, 2 x Wind-up More details in the attachment!  ... more information

Rolling mill 60" See attachment for details!  ... more information

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- Safety brake for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New frequ ...

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipp ...

ROLL DIAMETER 400mm POLL WORKING LENGTH 1000mm MOTOR POWER 45 KW DIMENSIONS: 447118501760 (L×W×H) SPEED RATIO OF ROLLS 1:1,27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

L/D=20.7 External dimensions 2700×1000×1400(LxWxH) Screw stiffness HRC65-68 Screw diameter 90mm Engine power 30KW/1470rpm SCREW LENGTH 1860 mm Heating section number/power 6kw×2  ... more information

5501500 TWIN SCREW 1. 1 PC 5501500 OPEN MILL RUBBER MIXER 2. 1 PC 5501500 OPEN MILL RUBBER MIXER 3. ELECTRIC CONTROL CABINET WITH DRIVER 4. DIRECT CONNECTION (COUPLED) 5. BRONZE BEARINGS 6. AUTOMATIC LUBRICATION 7. 160 KW 990r/min  ... more information

cross-section width:: Schläuche max. 11 mmcross-section heigth:: 11 mmfeed:: 0,5 - 100.000 mmCondition: used, very good conditionSpecification: universal cutting machine with roller drive for hoses - small cutting machine for hoses- feed unit: roller drive- microcontroller control: 80537- cutting unit: pneumatic- Type of cut: Blade cut- Industrial blade: for PVC hoses- Max. hose diameter: 11 mm- Maintenance unit: yes- Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length- Cutting force approx.: 500 N at 6 bar- Cutting length: 0.5 - 100,000 mm- Resolution/step change: 0.5 mm- Operating voltage: 230V, 50-60 Hz- Compressed air: 5 - 6 bar- Air consumption per stroke approx.: 0. ...

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel  ... more information

Yizumi Injection Press Model: YL2-V280L Clamping force 2800 kN Volume: 2000cc Mold open stroke 500mm Min. mold height 100mm Heated platen size 670mm x 780mm Heating plate daylight 600mm Injection pressure 1970 bar Theoretical Injection volume 2000cm3 Oil pump power 11kW System pressure 230 bar Total power 37kW Power supply: 415V, 50Hz, 3P+N+PE Rexroth variable pump + Inovance servo motor: Year 2021 CE marked

Plates 510x400 mm Clamping force 150 t max. injected volume 750 cm³ clear width 440 mm ... more information

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate ... more information

Oven Make: Carbolite Model AX60 395mm high x 400mm wide x 420mm deep 220/240 volts Single phase  ... more information

Oven Make: Gallenkamp Model OMT150 XX1.C  ... more information