milling machines used for sale

min/max. wheel diameter at ratio = 1:10: 25 / 600 mmgear width: 90 mmmodule max. spur toothing: 2 -9 Modulmin/max. pitch cone angle: 5 - 90 °weight of the machine ca.: 5,8 tOverall size: 3,8 x 2,3 x 1,6 mmmax. ram stroke: 0 - 100 mmno. of strokes: 63 - 400 /min Stücktotal power requirement: 7,2 kWMachine condition very goodcompl. standard accessories with adjustment tools, change gears and measure toolsvideo link:http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.beThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

High Performance Horizontal Milling Machine  ... more information

Connected load: 2.8kW, weight: 1.3t. ... more information

Speed range pre-milling spindle 60 - 1000 rpm Speed range finishing spindle with V-belt 350 - 10000 rpm TOOL CARRIAGE Distance between milling cutter and stylus 450 / 350 mm Vertical movement 50 mm Movement lengths 300 mm Movement transverse 180 mm FIXED WORK TABLE 250 x 700 mm large distance to spindle nose 475 mm Movement lengthwise and transversely 300 x 200 mm max. workpiece weight 600 kg Drive power 0.9 / 1.1 kW Dimensions approx. L x W x H 1350 x 1600 x 1950 mm Weight approx. 1.5 t used, in good condition

Description: Machine number: 25/62/621 Spindle speeds: 60 - 1820 rpm Table dimensions: 600 x 210 mm With 4 grooves Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a two-axis digital readout from the manufacturer HEIDENHAIN Feed rate: 10 - 196 mm/min Incl. various machine accessories such as collets, holders and moreweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,700 mm

SKODA WD 160 A Floor type boring machine - new in 1963 - refurbished 2011 - HEIDENHAIN measuring system - axis: X-axis 9100 mm Y-axis 2500 mm Z-axis 1200 mm W-axis 800 mm  ... more information

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

x-travel: 300 mmy-travel: 450 mmz-travel: 150 mmtotal power requirement: 1,5 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

x-travel: 700 mmy-travel: 350 mmz-travel: 450 mmtable surface area: 940 x 510 mmspindle taper: SK 40 spindle turning speed range: 32 - 1600 U/minfeed - longitudinal/cross: 8 - 400 mm/minfeeds vertical: 4 - 200 mm/mintotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of machine L x W x H: 1,85 x 1,62 x 1,83 mAccessories: vertical head with quill retraction, univ. table, counter bearing, hydr. vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Raddurchm. 900 mm Module 9 Capacity 21 KW Weight 11 to Max wheel diameter: 900 mm Wheel width 500 mm Module max 9 Milling cutter diameter 200 mm Tischaufspannï¬?ächen fit 720 mm Speed range 20-320 RPM. Feeds axial 0, 06...6, 0 mm/Rev. Proposed ' ube radial 0.02 bis2, 0 mm/Rev. Swivel spindle slide right/left: 45° space ca. 3000 x 1600 x 2.400 mm Weight ca. 11 to Power ca. 21 KW

x-travel: 600 mmy-travel: 400 mmz-travel: 500 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use  ... more information

Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm

x-travel: 550 mmy-travel: 350 mmz-travel: 400 mmtable surface area: 1130x330 mmnumber of T-slots: 5 T-slot - width: 14 mmH8T - slots distance: 63 mmnumber of tools: SK 40 quill stroke: 80 mmmilling-head swivable +/-: 180° total power requirement: kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1800 mmgear width: 735 mmmax. module: 12 min. module: 1 total power requirement: 30 kWweight of the machine ca.: 23 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Offer 21537 Specifications: - Table size approx. 1100 x 260 mm - Working range of the axes - X (longitudinal) approx. 815 mm - Y ( landscape ) approx. 400 mm - Z (vertical) approx. 410 mm - Milling unit swivel + tilt + rotatable - Horiz. Displacement of the milling unit 410 mm - Table can be swivelled 45° on both sides - Max. distance between milling spindle – table surface 500 mm - Tool holder ISO - Quill stroke mm - Working spindle speeds adjustable in steps 67 - 1400 rpm - Mot Table Feeds X ; Y ; Z - Coolant device - Drive 400 V / 4.5 kW - Space requirement approx. W 1900 x H 1900 x D 1900 mm - Weight approx. 3200 kg

x-travel: 14.000 mmy-travel: 4.480 mmz-travel: 3.000 mmw-travel: 300 mmtable:: table load: 145 ttable width: 3.100 mmtable length: 14.770 mmPassage height: 3.800 mmmax. passage: 3.200 mmdiameter of quill: 305 mmspindle turning speed range: max. 600 U/minrapid travel x/y/z: 6 / 6 / 12 m/minoutput: 100 kWcontrol: SIEMENS 840 D Powerline quill:: ISO 60 electrics - voltage/frequency: 380/50 V/Hzweight of the machine ca.: tdimensions of the machine ca.: mtable guiding: hydrostaticredesigned hydrostatics calculated to a maximum load of 450 tonsorthogonal milling head ISO 60angular milling head ISO 60 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... more information

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg