saws used for sale

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Panel saw, panel dividing saw, vertical panel saw machine-Horizontal cutting length: 5400 mm-Vertical cutting length: 2300 mm-Diameter saw blade: 220 mm-Motor power: 3.0 kW-Cutting depth: 60 mm-Machine length: 6200 mm-Transport height: 2550 mm-Required space: L6200/ W1100/H2870 mm-Weight: 750 kg ... more information

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Elumatec DG79 Wood saw Double mitre saw for PVC, aluminium and wood ... more information

HEMA UH 700 YOC 1987 Motor power 3 kW Roller diameter: 700 mm max. cutting width: 680 mm max. cutting height: 480 mm Saw blade length: 5,150 mm APA (Panhans) roller guide top + bottom Engine Brake incl. Aigner table extension with 2 rails (can be mounted on 2 sides) incl. various band saw blades Suction connection: D 125 mm Dimensions: approx. 129 x 800 x 230 cm (W x D x H) Weight: 580 kg School machine – The machine comes from a school training school.

Band saw SCHLEICHER Compactool 735 YOC 1987 Motor power: 2.2 kW Roll diameter: 60 cm max. cutting width: 57.5 cm max. cutting height: 40.5 cm Blade tension indicator Chassis Engine Brake Table can be swivelled up to 45° Roller guide top + bottom Rip fence Mitre Gate Valve Dimensions (approx. dimensions): W. 110 cm D: 80cm H: 226 cm

Gebr. Panel saw WOOD HERE 1215 Super Cut YOC 1987 Motor power: 3.5 kW Nominal current: 10.5 A Cutting length: 530 cm Cutting height: 220 cm Cutting depth: 70/80 mm (depending on material) Machine length: approx. 650 cm Suction connection: 120 mm Saw unit can be swivelled by 90° Alternate frame In the case of the panel saw, the saw boom is currently unhooked/dismantled Picture 1-6: Panel saw before dismantling. Picture 7-9: Current condition after disassembly. Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Sawblade tiltable: 45 °Length of the rolling table: 1.400 mmcutting width: 1.000 mmMotor output: 5,5 kWCutting height: ca. 155 mmSaw blade diameter: 450 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: ca. 700 kg: Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PINHEIRO SFD11 2 sawing machine with 2 saws facing each other Year 1988 ... more information

Esterer HDE71 Stroke 500mm fully hydraulic  ... more information

Double miter saw Fabr. Sneaker Type: MOD 09  ... more information

A.COSTA LINCE/2/40 double shaft multisaw – Italian production – year of production 1988 cutting width 250 mm cutting height 140 mm motors 2 x 30 kW feed motor 1.1 kW height adjustment motor 3 x 0.18 kW disc diameter max. 250mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 270 mm total power 63 kW feed adjustment feed speed 4-40 m/min minimum element length 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps four anti-ejection pawls central lubrication spigot diameter 2 x 160 mm spindle speed 5100 RPM machine dimensions (length/width/height) 210 / 160 / 180 cm weight ~ 2650kg

Raimann KD31 340/200 double shaft multi-saw blade - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple,  ...

– German production – year of manufacture 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm motor power 2 x 37 kW feed speed smoothly adjustable on the inverter disc diameter max. 350mm bottom shaft 400mm top shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of latches four upper pressure rollers electric height adjustment possibility to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm connection diameter 200 mm transport dimensions (L/W/H) 320 / 200 / 240 cm weight ~ 5000 kg

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

– German production –DTR – optimization of cutting width – dripping cross saw – automatic blade spacing – year of production 1989 TECHNICAL PARAMETERS: .max. element width 920 mm .max. element height 90 mm .max. element length 6000 mm main engine power 37 kW disc diameter max. 300 mm spindle diameter 60 mm sleeve diameter 70 mm fixed sleeve with a length of 60 mm floating sleeve for 1 disc floating sleeve with spindle length of 100 mm number of measuring heads 15 measuring head spacing 350 mm distance between measuring heads total input power 10 kW cross-cut saw for cutting material for a length of 2630 mm saw leveling the material cascade for transporting the board hydraulic feed in smooth speed control hydraulic material pressure hydraulic material height adjustment