other machines for plastic used for sale

For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) 1999. min. temperature 1/2/3: -45°C/-25°C/-25°C. Capacity: 18l, container diameter/length: 175mm/1000mm, refrigerant: R 404 A / 15. Dimensions: 910mm/500mm/1150mm, weight: approx. 70kg. Documentation available.

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... more information

BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 2048.09 // Type: 353 C Equipment / Additional information: 800 m3/h // -500 mbar RPM: 2300 // kW: 14.5  ... more information

Year: 2009 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... more information

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible. ... more information

Operating hours: 66511 Filling: Accura Xtreme grey Condition: Buildable, limited build quality until the following repairs are completed: Repair #1: Optics and profiler exchange, offer manufacturer: 8,973.45 EUR Repair #2: replacement of the load cell and VAT electronics, offer manufacturer: 4,206.25 EUR, Installation space in mm (x/y/z): 650x750x550mm, operating hours: approx. 67000h, Dimensions in cm (w x h x d): 126x220x228cm, Weight in kg: 1500KG

CAVALLERI SHEETER CT 12, constructed in 2010, double unwinder, photocell, Corona Plus treatment, max cutting width 1.000 mm., recently overhauled, for paper abut 40 to 300 gr/sqm ... more information

EOS P100 in very good condition, machine has always been serviced, last service in 02/2023. Material on the machine is PA2200. ... more information

This machine can produce PE, BOPP adhesive tapes, PET silicone tapes Coating units: - kissing rolls for BOPP adhesive tapes coating (film 25-45 um + acrylic glue 10-30 um) - Mayer bar for PE, BOPP adhesive tapes coating (film 20-100 um + acrylic glue 3-20 um) Technical data 1. Outline dimension（LXWXH）：40698×3720×5150mm 2. Effective width：1320mm 3. Rollers width：1450mm 4. Max mechanical speed： 220m/min 5. Max production speed： 200m/min 6. Max diameter：φ600mm 7. Max rewind diameter：φ600mm 8. Paper core size：3“（φ76） 9. Method of heating：hot oil 10. 9 units of ovens, 4m per unit, total 36m 11.Temperature control：max 120±4℃ 12. Rewind edge tolerance： ≤±2mm 13. Evenness degree： ≤±0.0015mm 14. Total power：95kw 15. Power supply：380V，50H ...

Side weld bag making machine SUMMIT PLASTIC MACHINERY. TECHNICAL SPECIFICATIONS: ________________________________________ • Welding Width: 700 mm • Bag Length (Max): 750 mm • Bag Length (Min): 75 mm • Cycles Per Minute: 200 U/min • Drive: Servo • Number Of Lanes: 1 OTHER SPECIFICATIONS: ________________________________________ Materials: LDPE, HDPE, MDPE; LLDPE and recycled Welding width min.-max. (mm): 75 - 700 Material thickness min.-max. (mm): 0,008 - 0,1 Antistatic device Water cooling of the welding knife Air support for films: Power transformer with 2kW capacity Hole punching device: No. Voltage: 380 V Triphase Frequency: 50 Hz

This 3D printer was manufactured in 2010 by VOXELJET. The VX800 model is known for its reliable performance and precision in creating complex parts and prototypes. This machine offers advanced printing capabilities suitable for a variety of applications. The VOXELJET VX800 3D printer we have for sale represents a solid addition to any production line seeking to enhance its 3D printing processes. For more details or to inquire about this printer, please contact us.

Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly. ... more information

According to the description below  ... more information

Poly draw garbage bag on roll converting system TA 1200 Year 2010 Two machines 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

Connected load: 2.5kW, controls: Siemens SIMATIC, weight: 80kg, with instruction manual. ... more information

Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. ... more information

Inclined conveyor belt on aluminium profile - MB Conveyors N-CPR (2 pcs.) Year of construction: 2011 Location: Lodz, Poland The inclined conveyor belt on aluminum profile, with regulation of height and angle of inclination Length of the inclined strap 200 cm, length of the horizontal strap 70 cm, width of the strap 44.5 cm Carriers with a height of 3.5 cm every 39 cm Height of the conveyor belt housing: 5 cm All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.