lathes used for sale

turning diameter:950 mmswing diameter:1200 mmturning height:800 mmfaceplate diameter:800 (hydr.) mmspindle drive:37/45 kWweight of the machine ca.:16,5 tdimensions of the machine ca.:4600x5500x5330 mmnew machine ex stock Taiwan with: Max. Swing Diameter 1200mmMax. Turning Diameter 950mmMax. Turning Height 800mmFANUC 0iTD Control System High Pressure Pump(7kg/cm2 ) Auto Luberication System Tool Holder BT50 for RAM Main Spindle Motor 37/45kw X Axis AC Motor 4.0 kw Z Axis AC Motor 7.0 kwC-axis Motor a8 7.5/11kw+MZI(0-2400RPM) Brake System for spindle X Axis Rapid Feedrate 20 m/min Z Axis Rapid Feedrate 20 m/min X Axis Travel :645 mm Z Axis Travel :800mm ATC Tools 12 Tools Spindle Nose A2-15 ZF Gear box Germany Chip Conveyor & chip car Oil/water separator Hydraulic system 3 Jaw Power Chuck 32" Hydraulic Unit Work Light Auto Lubrication SystemPower requirment 75KVAMachine Size :428028004680mm ...

Pay attention Pick up 2nd day of delivery ... more information

turning diameter:620 mmturning length:2000 mmcontrol:FAGOR 8055 max. swing over slide:410 mmbed width:350 mmspindle drive:17 kWspindle taper:A2-8 ASAspindle speeds:0-2500 1/min.spindle bore:105 mmtailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmrapid traverse x/z:15/12,5 m/minweight of the machine ca.:3,5 tdimensions of the machine ca.:3940 x1350x1810 mmautomatic tool changer:PRAGATI; aut. Revolver mit angetr. Stationen DTT80 12 POS. fachtools:1 Satz servo spindle motor:von FAGOR sowie Achsmotoren von FAGOR fixed steady rests:1 Stk.live center:1 Stk.follower rest:1 Stk.3 jaw chuck Ø:315 (hydr.) mmNew CNC lathe KRAFT KT 285/2000 with Fagor 8055.Made in Europe, Picture similiar.For more information please see the attached documents

Equipped with two turret supports (5-fold), protective covers against emulsion vapours, housing see pictures, CE compliant, -Refurbished 2007, -Space requirement approx. 20 sqm, -Weight approx. 20 t, -Headstock -main spindle bearing Ø, -axial 500 mm, -radial 240 mm, -Cross slide unit, -Vertical slide stroke 800 mm (Z-axis), -Axial slide stroke 1,000 mm (X-axis), -Basic hydraulics complete, RING system, -2x2 axes CNC path control SIEMENS Sinumerik 3 TT, -Optional accessory -6-fold face plate clamping ideal for thin-walled workpieces, -incl. pendulum jaws inside and outside (value approx. € 30,000.00), -incl. documentation, Attention! This machine has already been dismantled and is in storage.

turning diameter:1010 mmturning length:3000 mmcontrol:Fanuc 0ITF max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 spindle speeds:0-1400 1/min.spindle bore:130 mmtransmission ratio:2 tailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKmax. length of work piece:5000 mmrapid traverse x/z:10/10 m/minpower requirement:22 kWweight of the machine ca.:10.000 kgdimensions of the machine ca.:5325x1800x2230 mmautomatic tool changer:12-fach Y-axis:über Werkzeugrevolver Y TBYR250-12 BMT75 mm3-jaw hydraulic chuck:500 mmCNC controller:Fanuc 0ITF tools:1 Satz fixed steady:Option mmNew CNC lathe KRAFT ST 500/5000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:1000 mmcontrol:Fanuc Oi-TF turning diameter over bed slide:300 mmmax. swing over slide:190 mmbed width:250 mmspindle taper:A2-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200 kgdimensions of the machine ca.:2250x1115x1630 mmautomatic tool changer:8-fach CNC controller:Fanuc Oi-TF tools:1 Satz foundation bolts:1 Satz New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

-The machine was partially overhauled in 2013, -Country of origin Germany, -extended from 7 m to 11 m turning length, -Geometry Santer revolver, -Turning diameter over bed 1,070 mm, -Turning diameter over support 710 mm, -Turning length 11,000 mm, -bed width 710 mm, -2 gears, -Speed 3.55 - 710 rpm, -quill diameter 200 mm, -quill stroke 350 mm, -Spindle passage 128 mm, -Conveyor -Drilling rig incl. drill rod length approx. Ø 200 x 2,430 mm, -face plate 1,000 mm, -Bezel 4 quills 500 mm open, -Main drive motor 71 kW, -incl. documentation, Attention! This machine has already been dismantled and is in storage.

-Turning diameter over bed carriage 900 mm, -Turning diameter over bed panels 1,400 mm, -Peak height above floor 1,480 mm, -Peak height over bed panels 680 mm, -bed width 850 mm, -bed height 550 mm, -Main spindle diameter at the front bearing 206 mm, -main spindle bore 100 mm, -max. main spindle torque 15,000 Nm. Attention! This machine has already been dismantled and is in storage.

turning diameter: 650 mmturning length: 855 mmcontrol: Fanuc O-T total power requirement: kWweight of the machine ca.: 8500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

turning diameter:1500 mmturning length:4500 mmx-travel:1000 mmy-travel:350 mmz-travel:5000 mmswing diameter over face slide:1500 mmA lathelike new. It was a mispurchase for the intended application.3.000 Program working hours /New C-AxesFour-lane guide concept with lateral cross slide for full traversability of the steady rests and superstructures.

turning diameter: 710 mmturning length: 700 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Quality unchecked. Pick up by appointment only! Equipped with powered tools and bar feeder! ... more information

turning diameter:1010 mmturning length:4000 mmcontrol:FANUC OI TF max. swing over slide:718 mmbed width:500 mmspindle taper:A2-15 spindle speeds:0-1400 1/min.spindle bore:130 mmtransmission ratio:2 tailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKmax. length of work piece:4000 mmrapid traverse x/z:10/10 m/minpower requirement:22 kWweight of the machine ca.:9500 kgdimensions of the machine ca.:6557x2202x2487 mmmax. workpiece weight between centers:8600 kgautomatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz coolant system:6 barNew CNC lathe KRAFT ST 500/3000 with FANUC OI TFMade in EuropeFor more information please see the attached documents

turning diameter:570 mmturning length:1000 mmdimensions of the machine ca.:3,25 x 2,03 x 1,95 mTool disc turret for 8 tools with VDI 30.Not for power toolsmachine manual, technical documentation;Accessories: 3-jaw chuck, various tool holdersVideo is available ... more information

turning diameter:500 mmturning length:460 mmcontrol:Siemens 828D (15") brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 170/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. Ø 100 mm7. Bar capacity Ø dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 500 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guide14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Europe)Standard accessories1. Facing tool holders x 2 pcs2. O.D. tool gaskets x 8 pcs3. I.D. t ...

turning diameter:652 mmturning length:2000 mmcontrol:FAGOR 8055i turning diameter over bed slide:455 mmbed width:350 mmspindle taper:A2-8 spindle speeds:30-1700 (3 Stufen) 1/min.spindle bore:80 mmfeed stepless:0-5000 mm/mintailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmtool post size:25x25 mmpower requirement:7,5 kWcoolant pump:0.37 kWweight of the machine ca.:2600 kgdimensions of the machine ca.:3920x1605x2014 mm:8605 DINrepeating accuracy:0,01 mmpositioning accuracy:0,01 mmturret:4-fach mit Schaftaufnahme (Hersteller Pragati) CNC controller:FAGOR 8055 automatic stepless gear box:3 Stk.electronic hand wheel:für X- und Z-Achse :in deutscher Sprache coolant system:151 Lchip conveyor and trolley:Option steady rests:Option different chucks and faceplates:Option New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDM ...

swing diameter:200 mmweight of the machine ca.:15 tDistance between tips:832,5 mmturning length:380 mmwith chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers  ... more information

turning diameter:180 mmswing diameter:340 mmtotal power requirement:65 kWweight of the machine ca.:120 tdimensions of the machine ca.:4,2 x 1,6 x 3,0 mmax. workpiece weight:20 kgmax. X-axis travel:450 mmmax. Z-axis travel:300 mmchucking diameter:210 mmspindle distance:750 mmspindle bore:52 mmworktool system:10-fach VDI40 worktool system:8-fach Capto C5 (optional) 2-spindle

turning diameter:450 mmturning length:1500 mmcontrol:Fagor 8055 oder Fanuc max. swing over slide:260 mmbed width:300 mmspindle taper:A2-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1500 mmrapid traverse x/z:12/15 m/minpower requirement:9 kWweight of the machine ca.:1400 kgdimensions of the machine ca.:3300x1215x1750 mmautomatic tool changer:8-fach (PRAGATI) CNC controller:Fagor 8055 tools:1 Satz Made in EuropeFor more information please see the attached documents

turning diameter:1300 mmturning length:5300 mmcontrol:FAGOR 8055 max. swing over slide:900 mmspindle bore:150 mmtransmission ratio:2, automatisch schaltend taper of tailstock quill:6 MKautomatic tool changer:4-fach elektrisch CNC controller:FAGOR 8055, NEU control cabinet Siemens PLC:NEU New CNC lathe KRAFT ST 500/3000 with FAGOR 8055Made in EuropeFor more information please see the attached documents