lathes used for sale

turning diameter:650 mmturning length:2000 mmface slide travel:445 mmturning diameter over slide:260 mmturning speeds:1-2.000 1/mintransmission ratio:2 spindle:33 / 22 kWspindle bore:130 mmquill stroke:200 mmturret head:12 Pos.workpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,SAUTER-turret with 12 pos. (6 for live tools),VDI 40,SMW 3-jaw-chuck dia 400mm,tailstock,steady 100-250mm,C-axis,chipconveyor,free contour-programming, memory 256kB,accessoriesno hour meter, max. 1 shift

turning diameter:360 mmturning length:750/1000 mmcontrol:Fanuc/ Fagor/ Siemens max. swing over slide:300 mmbed width:250 mmspindle taper:As-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtransmission ratio:1 tailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750/1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200/1490 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mmswing diameter:1250|1600|2000|2300 mmturning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mmtable speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/mintransmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 tmax. torque on the faceplate:20|25|25|25 KNrapid feed of tool post:8000|3000|3000|3000 mm/minfeed speeds:0.1 - 500 mm/minMax. cutting force of tool head :18|25|30|30 KNmTravel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mmTravel of ram (horiz.):850|1000|1115|1400 mmCross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mmpower maindrive:22/30|30/37|37/45|37/45 kWweight of the machine ca.:9|12,5|18,5|20,5 tMachine size (LxWxH):2360x2277x3403|2660x2660x3698|3 ...

turning diameter over bed:402 mmturning diameter over slide rest:245 mmturning length:750/1000 mmcentre height:200 mmbed width:250 mmmax. workpiece weight between centres:280/300 kg:135 kgspindle bore:42 mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minlongitudinal feed:0.05-0.752 mm/Ucross feed:0.025-0.376 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:58 mmsleeve conus:4 MKquill stroke:180 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:4 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix

turning diameter over bed:502 mmturning diameter over slide rest:310 mmturning length:1000/1500 mmcentre height:250 mmbed width:300 mmmax. workpiece weight between centres:450/750 kg:225 kgspindle bore:58 (opt. 105) mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minspindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/Ucross feed:0,022-0,296 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:69 mmsleeve conus:4 MKquill stroke:200 mmpower requirement:5,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 250 SeriesMore information can be found in the appendix

turning diameter over bed:652 mmturning diameter over slide rest:450 mmturning length:1000/1500/2000/3000 mmcentre height:325 mmbed width:350 mmmax. workpiece weight between centres:1125/1690/2025/2815 kg:360 kgspindle bore:85 (opt. 105/155) mmspindle turning speed range:30-1500 (3 Getriebestufen) (opt. 80-1250/50-800) U/minlongitudinal feed:0,05-1,5 mm/Ucross feed:0,025-0,752 mm/Umetrical thread cutting:0.5 - 15 mm/Uthreading WHITWORTH:60-2 TPIrange of module thread:0,25-7,5 mm:120-4 mm/min.diameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-180 (180-400 opt.) mmwith live steady:Ø 10-140 mmpower requirement:7,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 325 SeriesMore information can be found in the appendix

turning diameter:652 mmturning length:1000/1500/2000/3000 mmcontrol:Siemens 808D turning diameter over slide rest:595 mmcentre height:325 mmbed width:350 mm:360 kgspindle taper:5 MKspindle nose:A2-8 spindle bore:80/105/155 mmspindle turning speed range:30-1700 (3) U/minlongitudinal feed:0-5000 mm/Ucross feed:0-5000 mm/Udiameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:7,5 kW:8605 DINWeight approx.:1,9/2,2/2,6/3,2 tCNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix

:SS-27 | SS-31 | SS-35 turning diameter:700|790|890 mmturning length:700/1200/1700/2200/3200/4200/5200 mmcontrol:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mmspindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/minspeed steps work spindle:4-stufig (automatisch schaltend) cross feed:0,001~250 mm/minfeed in z-axis:0,001~400 mm/minrapid travel - longitudinal/face:8/10 m/mindia of ball screw:45 mm in X-Achse / 60 mm in Z-Achse tool turret:10- oder 12-fach tool taper:VDI 40/50 oder Schaftaufnahme tool holder -shaft diameter:32x32 mmdiameter tailstock quill:160 mm:200 mmtailstock quill taper MT:5 spindle drive:30/37 (37/45 opt.) kWservo motor X-axis:3,8 kwservo motor Z-axis:3,8 kwweight of the machine ca.:11t für Spitzenweite 700mm (weitere 500mm: 1,5t) tCNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hyd ...

turning diameter:730/660 mmturning length:1.498 mmTravel turret No.1 (milling spindle) x/y/z:750 / +- 210 / 1.550 mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120 °Rapid traverse feeds turret 1 (milling head) x/y/z:50/30/50 m/minRPM milling spindle:12.000 1/minpower capacity - milling spindle:18,5 / 11 kWTorque of milling spindle:120 Nmtool taper milling spindle:CAPTO C6 Tool magazine for milling spindle (turret 1):100 Pos.Spindle 1 RPM:3.000 1/minSpindle 1 Power:30 / 25 kWTorque Spindle 1:1.000 / 840 NmC-axis spindle 1:0,001 °Bar capacity spindle 1:90 mmSpindle 2 RPM:3000 1/minSpindle 2 power:30 / 25 kWTorque Spindle 2:1.000 / 840 NmC-axis spindle 2:0,001 °Bar capacity spindle 2:90 mmspindle distance:1.862 mmtotal power requirement:100 kVAweight of the machine ca.:26,6 tdimensions of the machine ca.:5x 2,99 x 3 m9-axis turn-milling center with B-axis +-120°,lower turret wi ...

:SA-35 | SA-40 | SA-45 turning diameter:890|1020|1145 mmturning length:700/1200/1700/2200/3200/4200/5200 mmcontrol:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mmspindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/minrapid travel - longitudinal/face:8/10 m/mincross feed:0,001~250 mm/min.feed in z-axis:0,001~400 mm/mindia of ball screw:50 mm in X-Achse / 80 mm in Z-Achse tool turret:10-/12-fach tool taper:VDI 40/50 oder Schaft tool holder -shaft diameter:32x32 mmdiameter tailstock quill:235 mm:200 mmtailstock quill taper MT:6 spindle drive:37/45 (50/60 opt.) kWservo motor X-axis:4,5 (6 opt.) servo motor Z-axis:4,5 (6 opt.) kwweight of the machine ca.:16,5t für Spitzenweite 700mm (weitere 500mm: 2,2t) tCNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hydraulisch Solid slant bed esures the lathe´s accur ...

turning diameter:1000 / 700 mmturning length:3000 mmface slide travel:600 mmturning diameter over slide:700 mmturning speeds:1-1.800 1/mintransmission ratio:2 spindle:46 (60%) kWspindle bore:132 mmquill stroke:280 mmworkpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,PARAT tooling system,SCHUNK ROTA NC 500-160 power chuck,tailstock,chipconveyor

:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mmturning diameter over slide rest:1000|1200|1500|1600 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmbed width:1100 mmworkpiece weight:12 (15 opt.) tspindle bore:130 mmspindle taper:140 spindle speed (3 steps):2,5-250 U/minmetrical thread cutting:1~120 (44 Arten) mmlongitudinal feeds:0.1 ~ 12 (56 Arten) mm/Uface feeds:0.05 ~ 6 (56 Arten) mm/Urapid traverse longitudinal:3400 mm/minrapid traverse cross:1700 mm/mincross way of carriage:760 mmmovement of the upper support:300 mmtool size:45 x 45 mmtailstock quill diameter:260 mmstroke:300 mmtailstock-quill conus:80 metrischspindle motor:30 (50 opt.) kWtool holder:4-fach steady diameter:500-800 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lat ...

turning diameter:900 turning length:1986 mmcontrol:FANUC 18 iTB turning diameter over slide:680 mmturning speeds:1800 1/minturret (x-stations):12 power capacity:37 / 30 kWcentre distance:2050 mm:1 / 12 x BMT :116 mmtotal power requirement:45 kWweight:15,0 tdimensions of the machine ca.:5,30 x 2,60 x 2,40 mHeavy CNC lathe with c Axis and driven toolstailstock chipconveyordriven tools ( on 6 stations ) hydraulic staedyhydraulic 3-chaw-juck Forkard 3FNC D= 500 mm oil mist manuals15 sets of chaws15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

:SDM 1000E | SDM 1250E | SDM 1400E turning diameter over bed:1000|1250|1400 mmturning diameter over slide rest:650|900|1100 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmmax. workpiece weight between centers:8000 kgbed width:755 mmspindle nose:A2-15 spindle bore:130 mmspindle speed (3 steps):3,15-315 U/minmetrical thread cutting:1~120 (56 Arten) mmcross way of carriage:520|680|720 mmmovement of the upper support:300|300|400 mmtool size:45 x 45 mmtailstock quill diameter:180 mmstroke:300 mmtailstock-quill conus:6 MKweight of the machine ca.:bei 3m: 12 t (jeder weitere Meter ca. 800kg) Machine size (LxWxH):bei 3m: 6100x1900x2000 mmtool holder:4-fach follower rest:50-220 mm4 jaw chuck:1000 mmsteady diameter:50-470 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lathe

turning diameter:900 turning length:1986 mmcontrol:FANUC 18 iTB turning diameter over slide:680 mmturning speeds:1800 1/minturret (x-stations):12 power capacity:37 / 30 kWcentre distance:2050 mm:1 / 12 x BMT :116 mmtotal power requirement:45 kWweight:15,0 tdimensions of the machine ca.:5,30 x 2,60 x 2,40 mHeavy CNC lathe with c Axis and driven toolstailstocktool eye chipconveyordriven tools ( on 6 stations ) hydraulic staedyhydraulic 3-chaw-juck D= 600 mm oil mist model IFMmanuals15 sets of chaws15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

turning diameter:256 mmturning length:455 mmswing diameter over slide rest:260 mmtravel -x axis:198 mmtravel -z axis:508 mmturning speed range - main spindle:4800 1/minpower capacity - main spindel:18 / 11 kWC-Axis:0,01 °turret (x-stations):12 x VDI 30 PosNumber of driven tools:6 Postool taper:VDI 30 Spindle speed driven tools:5000 min -1spindle hollow:52 mmrapid power traverse in X-and Z direction:30 m/minpower capacity - driven tools:4,4 kWtotal power requirement:25 kVAweight of the machine ca.:4 to.dimensions of the machine ca.:3,1 x 2,3 x 2,2 mCNC lathe with tailstock,12-Pos. turret (6 pos. for live tools), chipconveyor,hollow clamping cylinder,graphic simulation and collission check,ethernet, USB,chipconveyor,parts catcher,tooleye,flush gun,collet chuck KITAGAWA CRL60A6,tailstock manually, quill programable,LED light,machining of plastic material only!hour meter: approx. 18.000h "m ...

bar material dia.:10 mmturning length:105 mmturning speeds:15.000 / 10.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 18i-TB total power requirement:3,5 kVAweight of the machine ca.:1,5 tdimensions of the machine ca.:1,9 x 0,8 x 1,7 mtoolpiece turning speed range:8.000 1/minmain spindle power:3,7 kWsub spindle power:1,1 kWCNC sliding headstock machine,subspindle,7 axis (X1, Z1, Y1, C1, X2, Z2, C2),barloader LNS TRYTON 112 A-B,Fireextinguisher KRAFT und BAUER,parts-ejector,coolant tank,machining with oil as coolant,reading hours:approx. 38.000 hours "machine on", approx. 27.000 hours "machining"

equipped with Fagor XYZ digital counter, motor power 15kv ... more information

:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mmswing diameter:1200|1600|2000|2300|2600 mmturning height:1000|1250|1400|1600|1500 mmtable speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/mintransmission ratio:16 max. workpiece weight:3,2|5|8|8|8 trapid feed of tool post:1800 mm/minfeed speeds:0,8-86 mm/min in X-AchseTravel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mmTravel of ram (horiz.):630|915|1115|1250|1500 mmmax. vertical adjustment of side-support:900|900|980|980 mmmax. horizontal adjustment of side-support:630|630|500|500 mmCross rail travel :850/1100|890/990/1240/1640|1240/1640 mmpower maindrive:22|30|37|37 kWweight of the machine ca.:9|14|18|23|21 tMachine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mmtool holder:5 fach:LED 4 jaw chuck:mit 4 Klauenkläst ...

turning diameter:33 mmturning length:330 mmcontrol: 840 total power requirement:20 kWweight of the machine ca.:6 tdimensions of the machine ca.:3850,2000,2100 m17 axes3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axesBarfeederMachine On-time 58,133 hours