lathes used for sale

turning diameter:450 mmturning length:1500 mmcontrol:Fagor 8055 oder Fanuc max. swing over slide:260 mmbed width:300 mmspindle taper:A2-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1500 mmrapid traverse x/z:12/15 m/minpower requirement:9 kWweight of the machine ca.:1400 kgdimensions of the machine ca.:3300x1215x1750 mmautomatic tool changer:8-fach (PRAGATI) CNC controller:Fagor 8055 tools:1 Satz Made in EuropeFor more information please see the attached documents

turning diameter:1300 mmturning length:5300 mmcontrol:FAGOR 8055 max. swing over slide:900 mmspindle bore:150 mmtransmission ratio:2, automatisch schaltend taper of tailstock quill:6 MKautomatic tool changer:4-fach elektrisch CNC controller:FAGOR 8055, NEU control cabinet Siemens PLC:NEU New CNC lathe KRAFT ST 500/3000 with FAGOR 8055Made in EuropeFor more information please see the attached documents

turning diameter:200 mmswing diameter:260 mmturning height:60 mm ... more information

turning diameter:280 mmturning length:250 mmcontrol:Fanuc 0i TF swing diameter over bed slide:280 mmBar capacity:44 mmspindle speeds:4800 1/minx-travel:155 mmy-travel:+/-35 mmz-travel:250 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:11/15 kWMachine size (LxWxH):1.842x2.793x2.446 mmmachine weight:5000 kgfeeds:0.001-500 mm/Uc-axis:0.001 °turret:16-fach, BMT-55 type Y-axis:über Revolver mmhollow chuck:hydr. 200 mm:8 bartailstock:ohne! brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cooler11. Power turret syst ...

turning diameter:175 mmturning height:70 mmchucking diameter:175 mm ... more information

equipped with SONY X-Y digital counter, 1 quick-change chisel holder; Pay attention Pick up 2nd day of delivery ... more information

turning diameter:402 mmturning length:750 mmcontrol:FAGOR 8037 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2000x1115x1670 (LxBxH) mmturret:8 fachCNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:530 mmcontrol:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mmswing diameter over bed slide:360 mmBar capacity:64 mmspindle speeds:3500 1/minspindle speed:Gegenspindel: 5000 1/minx-travel:230 mmy-travel:±51 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:17 (Hauptspindel) kWspindle drive:5,5/7,5 (Gegenspindel) kWMachine size (LxWxH):3290x2180x2337 mmmachine weight:6100 kgc-axis:0.001 °turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mmhollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 barhydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 20 ...

turning diameter:402 mmturning length:1000 mmcontrol: 8055 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2250x1115x1670 (LxBxH) mmturret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

turning diameter over bed:650 mmturning diameter over slide:450 mmturning length:1435 mmbed width:350 mmspindle bore:155 mmspindle speed:50-800 (3 stufig, stufenlos) U/minspindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mmtailstock quill diameter:95 mmtailstock quill taper MT:5 MKtool post size:25x25 mmpower requirement:7,5 kWweight of the machine ca.:2400 kgdimensions:3020x1140x1770 mmDRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 StückFactory new center lathe with 2-axis digital display and variable speed and many more.CHARACTERISTICS:Powerful, flexible and productiveWith an optimal pric ...

Equipped with accessories, quick couplers and add-on holders, 4 chewing plate (400mm) and 2 fixed glasses. ... more information

turning diameter over bed:1630 mmturning diameter over slide rest:1190 mmturning length:5000 mmcentre height:800 mmswing in gap:2100 mmbed width:1000 mmmax. workpiece weight:12000 (zw. Spitzen) kgnumber of spindle speeds:16 4 - 242 U/minspindle bore:120 mmtailstock quill diameter:180 mmtailstock quill stroke:350 mmWeight approx.:22 ttotal power requirement:ca. 25 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

turning length:1500 mmweight of the machine ca.:6 ttool taper:VDI40 transport dimensions LxWxH:3,9 x 2,0 x 2,5 mSpindle running hours : 23149 ... more information

turning diameter over bed:2300 mmturning diameter over slide rest:1860 mmturning length:5000 mmcentre height:1150 mmswing in gap:- mmlength of gap:- mmfaceplate:1500 mmbed width:1000 mmmax. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kgnumber of spindle speeds:3-300 U/minspindle bore:206 mmtailstock quill diameter:- mmtailstock quill stroke:- mmWeight approx.:26 tspindle drive:50 kWDRO:optional 4 jaw chuck:1500 mmHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

turning diameter:570 mmturning length:2000 mmcontrol:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mmbed width:350 mmspindle taper:A2-8 spindle speeds:0-2500 1/min.spindle bore:80 mmtailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmchuck size:250 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2970 kgdimensions of the machine ca.:3325x1350x1810 mmautomatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mmtools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055.Made in Europe, Picture similiar.For more information please see the attached documents

number of spindles:6 spindle passage:40 mm?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL  ... more information

Quality unchecked. Provide; driven tool (4000 rpm), C-axis (360° indexable) tool pre-setter, part catcher, counter center. ... more information

equipped with K+C Easson 10L digital counter; 1 fixed pair of glasses; Pay attention Pick up 2nd day of delivery ... more information

 ... more information

number of spindles:8  ... more information