lathes used for sale

Equipped with three-claw.. ... more information

Description: Specification : Bed Length 26' Capacity Machine Swing : 29.5' / 760 mm Maximum Machining Diameter : 16.540' / 420 mm Maximum Working Capacity : 4' / 102 mm Maximum Machining Length : 23.8' / 603 mm Main Spindle Chuck Size : Kitagawa 15' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 40 Hp / 30 kW Second Spindle Chuck Size : Kitagawa 10' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 35 Hp / 26 kW Turret (Upper) Number Of Tools : 12 Maximum Speed : 6000 rpm Motor Output (30 min rating) : 10 Hp / 8 kW Feed Axes Travel (X Axis) : 11' / 280 mm Travel (Y Axis) : 6' / 150 mm Travel ((Z Axis) : 26.39' / 670 mm Travel (W Axis) : 26.63' / 650 mm Complete with Turbo Vacummentation SWL 69 kgs Swing Jib Crane, Demag electric lift hoist.turning diameter: 420 mm, Drehlänge: 603 mm, serial number: 325,905, turning diameter over slide: 29.5' / 760 mm mm, x-motio ...

:KHL-160 | KHL-180 | KHL-200 | KHL-220 turning diameter over bed:1600|1800|2000|2200 mmturning diameter over slide rest:1250|1450|1650|1850 mmturning length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mmbed width:1600/2100 mmworkpiece weight:32t (40t,64t, 80t Option) spindle bore:85 mmspindle taper:120mm taper 1:7 number of spindle speeds:0.86-160 U/minmetrical thread cutting:2-40 mmrange of module thread:1.5-20 mmlongitudinal feed:0.125-4.8 mm:0.063-2.4 mmmovement of the upper support:quer: 700mm/900mm movement of the upper support:längs: 600 mmturning tool - shaft cross cut:70x70 diameter tailstock quill:300/500 mmtaper of tailstock:100 taper 1:7 quill stroke:300 mmsteady rest close/open:400-750/650-1200 mmmain drive motor:80/110 kW4 jaw chuck diameter:1000 - 1600 mmsteady rest diameter:400 - 750 mmopen steady:650-1200 mmCNC controls from:Siemens/Fanuc/Fagor

Description: serial number: P 2141.0012-06 control: SIEMENS Sinumerik ,802  , turning diameter over slide: 315 mm number of controlled axes: 2 travels: X-axis: 150 mm Z-axis: 1000 mm toolchanger positions: 8 turning speed range: 25 - 4000 rpm turning diameter: 315 mm total power requirement: 15 kW  , attention: upgrade to SIEMENS ,Sinumerik ,802, revolver head is broken! turning diameter: 315 mm, serial number: P 2141.0012-06, turning diameter over slide: 315 mm, x-motion: 150 mm, z-motion: 1,000 mm, control: SIEMENS Sinumerik 802, toolchanger positions: 8, number of controlled axes: 2, turning speed range: 25 - 4000 rpm, total power requirement: 15 kW, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,800 x 1,700 mm

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mmturning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:475|575|675 mmbed width:990 mmspindle bore:153/230/305/405 mmspindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mmtailstock quill diameter:165|200 mmtailstock quill adjustment:250 mmtaper in tailstock:6 MKtailstock movement:über Motor travel -x axis:370 | 480 mmtravel - z:= Spitzenweite mmservo motor X-axis:3 | 4 kwservo motor Z-axis:4 | 7 kwrapid power traverse in X-and Z direction:5/4 m/minhydraulic motor:2,2 (2,9 opt.) kWcoolant pump drive:3 (15 opt.) | 15 barweight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2 ...

faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor

Quality unchecked. ... more information

Description: PINACHO Mustang CNC Lathe machine number: 41101 control unit: Steuerung Fagor 8055 TC tecnical details: center height: 200 mm distance between centers: 1000 mm permitted diamter over guide travel: 400 mm permitted diameter over longitudinal slide: 370 mm permitted diameter over cross slide: 210 mm bed width: 300 mm headstock bore hole main spindle: 65 mm main spindle Nase Camlock no. 6 DIN 55027 morse taper of main spindle: 5 spindle speed 2 constant cutting speed 1st step 0 - 700 rpm, 2nd step 700 - 3000 rpm feeds working range Z, X: 0 - 7000 mm/min. rapid traverse Z, X: 10 m/Min. tailstock shaft diameter: 58 mm tailstock shaft path 155 mm morse taper tailstock: 4 motors: power main motor: 7.5 kW power direct current motor Z-axis in Nm: 12 Nm power direct current X-axis: 4 Nm power of motor pump: 0.57 kW further details: without clamping jaw chuck, with foot switchserial ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mmturning length:5000/6000/7000/8000/9000/12000/14000/16000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:705|805|905 mmwidth of cross cariage:600 mmbed width:1370 mmspindle bore:200 mmspindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mmtailstock quill diameter:300 mmtailstock quill adjustment:250 mmtaper in tailstock:7 MKtailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mmtravel - z:= Spitzenweite mmservo motor X-axis:4 kwservo motor Z-axis:7 kwrapid power traverse in X-and Z direction:5 m/minhydraulic motor:1,4 (ab 9m: 3,6) kWcoolant pump drive:15 barweight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20150 mmmachine width ...

faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders

Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacksweight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm

Description: Operating hours with pick-up: 125245 hrs. with bar feeder, type FMB, chip conveyor, type P09.04M6258.01, serial 44660 Further technical data can be found in the PDFturning diameter: 20 mm, serial number: 0581 (054), control: FANUC Series 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,200 x 1,700 mm, C-axis simultaneously controllable: Yes, Counter spindle: Yes, Accessories included: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 2,200 kg

faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor

Quality unchecked. Provide; 580 cutting hours! driven tool (3600 rpm), C-axis, part catcher, counter center, ... more information

Description: Operating hours with pick-up: ,20573 hrs. with bar feeder, type Haas Bar Feeder, Serial 158892, Chip conveyor, type P09.17M8736.01, Serial NP-12332927 detailed technical description can be found in the attached PDFturning diameter: 38 mm, serial number: 0095, control: FANUC 31i-B, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 2,200 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: Yes, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 4,300 kg

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:500 mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories

Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork companyApprox. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... more information

Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm ... more information

-DM 800 mm, turning length 5,000 mm, -Flood damage, control not affected, -equipped with 500 mm forkart lining, 2 Lynette DM, -Geom. very good condition, only used for fine work, renewal of the control recommended, very suitable for retrofit, Attention! This machine has already been dismantled and is in storage.