- Automatics (Lathes) For Bars (7)
- Bench Lathes For Precision Mechanics (25)
- Carousel Turning Machines (Lathes) (61)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (35)
- CNC Cycle Turning Machines (45)
- CNC Double Spindel Turning Maschines (Lathes) (13)
- CNC Long Turning Automatics (36)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (2)
- CNC Turning Automatics (28)
- CNC Turning Centers (159)
- CNC Turning Machines (459)
- Cutting-Off Machines (8)
- Cycle Lathes (38)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (289)
- Facing Disks (2)
- Facing Lathes (15)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (27)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (10)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (20)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (13)
- Multi Spindle Automatics For Bars (13)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (3)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (1)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (162)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (8)
- Universal Lathes Up To 800 Mm Diameter (12)
- Universal Turning Machines (Lathes) (30)
- Vertical Turning Centres (5)
- Vertical Turning Machines (32)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (50)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- ALZMETAL / HESSAP ET (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (2)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (2)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (19)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- Dimitrov (2)
- ... more
Manufacturer:
(Category: 102)
New in: 2004
used
X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation. ... more information
New in: 1994
used
Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.
New in: 2005
used
X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation. ... more information
New in: 1997
used
Center distance: 1500mm, connected load: 24kVA, length: 3000mm, width: 1835mm, height: 1865mm, weight: 3.05t, including 250-chuck Bison, adjustable hollow spindle stop, quick-change head size C + 9 turning tool/drill rod holders. ... more information
New in: 2001
used
Swing ober bed/ support: 400/ 245mm, Drehlänge: 1385mm, Spitzenweite: 2370mm, Steuerung: Fanuc Series 210i-T Anschlussleistung: 11kW, Länge: 3100mm, Breite: 1700mm, Höhe: 1600mm, Gewicht: 3,1t, mit Ersatzteilen. ... more information
New in: 1978
used
Center distance: 1500mm, swing over bed slide: 145mm, center height: 245mm, with copying device and documentation. ... more information
New in: 2018
used
Spindle power: 3.7/7.5kW, max. rotational speed: 5000/min, controls: Fanuc Series 0i-TF, length: 2560mm, width: 2512mm, height: 2145mm, weight: 4.3t, operational hours counter: 8923h, with documentation. ... more information
New in: 1965
used
Converted to CNC in 2002, control: Siemens 840D, footprint X/Y: approx. 6000mm/8000mm, max. speed: 2000rpm, interference circle turning diameter: 1800mm. Including: Tool changer with 12 tools. Documentation available. ... more information
New in: 2007
used
Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.
New in: 1995
used
Main spindle opening: 30mm, clamping chuck: DIN 177E, number of tool slots: 12, controls: GE Fanuc Series 0-T, with Bar Loader IEMCA. ... more information
New in: 1999
used
Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly. ... more information
New in: 1996
used
Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly. ... more information
used
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... more information
New in: 1998
used
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
New in: 2004
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
New in: 2006
used
Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... more information
New in: 1991
used
Rotational speed: 22-1800/min, an inspection is possible. ... more information
used
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible. ... more information
New in: 1996
used
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... more information