lathes used for sale

With multi-fix holders size C, ACU Rite position indicator, rapid traverse in X and Z axis, three-jaw lathe chuck Forkardt F315, without documentation, an on-site inspection is possible. ... more information

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... more information

Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... more information

CONTROLS  CNC controls FANUC 18 T BASIC FUNCTIONS  number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING  swing diameter (max): 700 mm  turning diameter (max): 700 mmMAIN SPINDLE  spindle revolutions (max): 3500 /min  spindle bore diameter: 91 mm  c-axis: yes COUNTER SPINDLE  Z-axis travel: 1105 mmX/Z SLIDE  X-axis travel: 362 mm  tool fixture: Turret   number of tool positions (total): 12 TOOL MAGAZINE  number of positions: 12 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4820 mm  space requirements -front/back-: 3200 mm  total height: 2300 mm &n ...

Turning diameter: 600mm. ... more information

CONTROLS  CNC Teach In Controls NUM 1062 BASIC FUNCTIONS  number of x/z slides: 1   live positions: no WORKING RANGE TURNING  swing diameter (max): 570 mm  turning diameter (max): 365 mm  worpiece length max.: 1000 mmMAIN SPINDLE  spindle revolutions (min): 3 /min  spindle revolutions (max): 2500 /min  number of gears: 2   spindle diameter: 62 mmX/Z SLIDE  traverse velocity Z (min): 0 mm/min  traverse velocity Z (max): 10000 mm/min  traverse velocity X (min): 0 mm/min  traverse velocity X (max): 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  taper: MK 5 ELECTRICAL SPECIFICATIONS  mains power supply: 35 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space require ...

There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... more information

CONTROLS  CNC Teach In Controls SIEMENS BASIC FUNCTIONS  design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 720 mm  turning diameter (max): 380 mm  bar diameter (max): 108 mm  worpiece length max.: 1500 mmMAIN SPINDLE  spindle revolutions (min): 0 /min  spindle revolutions (max): 1200 /min  number of gears: 3   spindle bore diameter: 108 mmX/Z SLIDE  traverse velocity Z (max): 5000 mm/min  traverse velocity X (max): 5000 mm/min  rapid traverse Z: 5000 mm/min  rapid traverse X: 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  distance betw. centers (max): 1500 mm  sleeve stroke: 200 mm  sleeve diameter: 120 mm  taper: MK 6 ELECTRICAL SPECIFICATI ...

Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... more information

CONTROLS  CNC controls SIEMENS 840 D MIT SHOPTURN BASIC FUNCTIONS  number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1   number of y-axes: 1 WORKING RANGE TURNING  swing diameter (max): 500 mm  turning diameter (max): 330 mm  bar diameter (max): 51 mmMAIN SPINDLE  spindle revolutions (min): 20 /min  spindle revolutions (max): 6000 /min  drive power S1 100%: 12 kW  spindle torque S1 100%: 115 Nm  spindle diameter: 100 mm  c-axis: yes X/Z SLIDE  Z-axis travel: 450 mm  X-axis travel: 202 mm  Y-axis travel: 80 mm  rapid traverse Z: 30000 mm/min  rapid traverse X: 24000 mm/min  rapid traverse Y: 10000 mm/min  tool fixture: Turret TAILST ...

X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.

CONTROLS  CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS  number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 420 mm  worpiece length max.: 1130 mmMAIN SPINDLE  spindle revolutions (min): 10 /min  spindle revolutions (max): 3000 /min  spindle bore diameter: 51 mmTAILSTOCK  sleeve stroke: 110 mm  sleeve diameter: 70 mm  taper: MK 4 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3500 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder

Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... more information

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... more information

Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... more information