lathes used for sale

Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm. ... more information

Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... more information

Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... more information

A TADU lathe is available, which has been retrofitted with CNC technology by Konrad Seidler. Speed: max. 200 rpm, turning diameter: 1750 mm (interference circle diameter), control: Siemens 840D, space requirement X/Y/: 5000mm/5000mm. Including a turret with 8 tool holders. ... more information

Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. ... more information

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.

Center distance: 1400mm, swing diameter over bed: 540mm, swing diameter over slide: 320mm, travel Z/X: 1470mm/310mm, spindle bore: 103mm, speed range: 4000rpm, control: Index C200. Dimensions X/Y/Z: 4000mm/1300mm/1400mm, weight: 8000kg. Documentation available. ... more information

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:80 mmtotal power requirement:1,0 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,7 x 0,6 x 1,2 mfacing lathe with manual feed, various accessories ... more information

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mmswing diameter:2500|2800|3100|3500 mmturning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mmmax. torque on the faceplate:63000 Nmmax. workpiece weight:10/16 ttable speeds:0,5-80 |0,5-80 |2-63 |2-50 1/minTravel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mmTravel of ram (horiz.):1400|1600|1700|1800 mmrapid traverse X-axis:3 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55 kWWeight approx.:32/35/37|35/38/40|36/40/42|43/45 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mmswing diameter:4000|5000 mmturning height:2500/3150/4000|2500/3150/4000 mmmax. torque on the faceplate:100000 Nmmax. workpiece weight:32/50/83 ttable speeds:2 ? 40 1/minTravel of Ram (vertical):1300/1600/2000 mmTravel of ram (horiz.):2250 | 2800 mmrapid traverse X-axis:3|4 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55|75 kWWeight approx.:58/75/115 |58/75/115 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

faceplate diameter:4700/5700 mmswing diameter:6300 mmturning height:3150/4000 mmworkpiece weight:63/100 ttable speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNmslide stroke:vertikal: 1600/2000 mmslide stroke:horizontal: 3400 mmcross section of ram:240x240/280x280 mmCross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:90/110 kWweight of the machine ca.:110/170 tMachine size (LxWxH):9000x7000x8000 mmcontrol:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

faceplate diameter:6300 mmswing diameter:8000 mmturning height:4000 mmworkpiece weight:120 ttable speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nmslide stroke:vertikal: 2500 mmslide stroke:horizontal: 4350 mmcross section of ram:280x280 mmMax. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:110 kWweight of the machine ca.:190 tMachine size (LxWxH):11000x9000x8000 mmcontrol:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mmfaceplate diameter:1500|2000|2500|2500 mmturning length:330 mmmax. workpiece length:450 mmbed width:450 mmmax. workpiece weight -without tailstock:3000 kgwidth of cross cariage:250 mmspindle bore:155 (230 opt.) mmspindle nose:A2-11 (A2-15 opt.) spindle cone:7 MKspindle speed:4-600|4-600|4-400|4-400 1/minspindle speed steps:4 cross way of carriage:330 mmmovement longitudinal:1000|1000|1500|1500 mmspindle drive:22 (29 opt.) kWservo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mmrapid power traverse in X-and Z direction:6/8 m/minnumber of tools:4 tool post size:32x32 mmweight of the machine ca.:7000|7500|8000|10000 kgMachine size (LxWxH): ...

turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor

turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system

faceplate diameter:1400 mmswing diameter:1600 mmturning height:1000 mmfaceplate turning speed range -stepless-:1 - 250 U/minmax. horizontal adjustment of cross-rail sup.:950 mmmax. adjustment of vertical turret slide:700 mmmax. vertical adjustment of side-support:1000 mmmax. horizontal adjustment of side-support:630 mmadjustment of cross-rail:660 mmadjustment speed of cross-rail:400 mm/minmax. workpiece weight:6300 kgfeed per revolution:0,025 - 10 mm/Upower capacity:56 kWweight of the machine ca.:21,5 tdimensions of the machine ca.:3 x 4,2 x 4,2 mwith 2-axes digital readout5-station turret headside headV-constant cutting speed

Equipped with three-claw.. ... more information

turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories

Digital readout: Anilam mini wizard ... more information

Quality unchecked. Provide; 580 cutting hours! driven tool (3600 rpm), C-axis, part catcher, counter center, ... more information