lathes used for sale

Converted to CNC in 2002, control: Siemens 840D, footprint X/Y: approx. 6000mm/8000mm, max. speed: 2000rpm, interference circle turning diameter: 1800mm. Including: Tool changer with 12 tools. Documentation available. ... more information

Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.

Main spindle opening: 30mm, clamping chuck: DIN 177E, number of tool slots: 12, controls: GE Fanuc Series 0-T, with Bar Loader IEMCA. ... more information

faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor

Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly. ... more information

faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders

Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly. ... more information

Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... more information

faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor

Connected load: 24kW. ... more information

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:500 mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mmswing diameter:2500|2800|3100|3500 mmturning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mmmax. torque on the faceplate:63000 Nmmax. workpiece weight:10/16 ttable speeds:0,5-80 |0,5-80 |2-63 |2-50 1/minTravel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mmTravel of ram (horiz.):1400|1600|1700|1800 mmrapid traverse X-axis:3 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55 kWWeight approx.:32/35/37|35/38/40|36/40/42|43/45 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mmswing diameter:4000|5000 mmturning height:2500/3150/4000|2500/3150/4000 mmmax. torque on the faceplate:100000 Nmmax. workpiece weight:32/50/83 ttable speeds:2 ? 40 1/minTravel of Ram (vertical):1300/1600/2000 mmTravel of ram (horiz.):2250 | 2800 mmrapid traverse X-axis:3|4 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55|75 kWWeight approx.:58/75/115 |58/75/115 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... more information

faceplate diameter:4700/5700 mmswing diameter:6300 mmturning height:3150/4000 mmworkpiece weight:63/100 ttable speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNmslide stroke:vertikal: 1600/2000 mmslide stroke:horizontal: 3400 mmcross section of ram:240x240/280x280 mmCross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:90/110 kWweight of the machine ca.:110/170 tMachine size (LxWxH):9000x7000x8000 mmcontrol:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

Rotational speed: 22-1800/min, an inspection is possible. ... more information

faceplate diameter:6300 mmswing diameter:8000 mmturning height:4000 mmworkpiece weight:120 ttable speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nmslide stroke:vertikal: 2500 mmslide stroke:horizontal: 4350 mmcross section of ram:280x280 mmMax. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:110 kWweight of the machine ca.:190 tMachine size (LxWxH):11000x9000x8000 mmcontrol:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... more information