- (1)
- Automatics (Lathes) For Bars (8)
- Bench Lathes For Precision Mechanics (25)
- Carousel Turning Machines (Lathes) (52)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (25)
- CNC Cycle Turning Machines (46)
- CNC Double Spindel Turning Maschines (Lathes) (12)
- CNC Long Turning Automatics (36)
- CNC Long Turning Machines (27)
- CNC Multiple Spindel Turning Lathes (9)
- CNC Sloping Beds (3)
- CNC Turning Automatics (28)
- CNC Turning Centers (159)
- CNC Turning Machines (449)
- Cutting-Off Machines (8)
- Cycle Lathes (37)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (269)
- Facing Disks (2)
- Facing Lathes (14)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (28)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (10)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (19)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (7)
- Lunettes (13)
- Multi Spindle Automatics For Bars (14)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (4)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (1)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (13)
- Turning Benches (3)
- Turning Machines (Lathes) (136)
- Turning Machines (Lathes) And Turning Automatics (3)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (7)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (26)
- Vertical Turning Centres (3)
- Vertical Turning Machines (35)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (46)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (22)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (18)
- BOEHRINGER MAZA (1)
- BOLEY (8)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- BREUNING IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (35)
- CAZENUEVE (1)
- CELORIA (1)
- Chevalier (4)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINCINNATI-MILACRON (1)
- CINNCINATI (1)
- Citizen (28)
- CITIZEN CINCOM (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (17)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (56)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (11)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAH LIH (1)
- DAINICHI (1)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- DIEDESHEIM (1)
- ... more
Manufacturer:
(Category: 102)
New in: 2015
used
number of spindles:6 spindle passage:40 mm?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL ... more information
New in: 1987
used
used
1.000 € Equipped with 2-axis digital readout. -1.5 kW. - Recording claws: D1-5 / CAMLOCK. -Number of speeds: 8. -Speed range: 70 - 2000 rpm -Main shaft recording: MK4. -Tailstock recording: MK3. -Tailstock diameter: 32 mm. -Incl 3 and 4 claw, adjustment plate, fixed goggles, -Guided glasses, lighting, cooling, change wheels.
New in: 2018
new
faceplate diameter:5700 mmswing diameter:6300 mmturning height:4000 mmtotal power requirement:DC 110 kWworkpiece weight max.:100 ttable speeds:0.2 ~ 20 U/minTorque:des Tisches 300 kN.mslide stroke:vertikal: 2000 mmram diameter:280 mmrapid traverse:2000 mm/mincontrol:CNC Siemens oder Fanuc _head swivability:-15°?+30 °weight of the machine ca.:127 tRams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories.Further technical details and accessories appearing in Appendix.
used
turning diameter over bed:2600 mmturning diameter over slide rest:2200 mmturning length:5000 mmfaceplate:2050 mmnumber of spindle speeds:0,7 - 70 rpmtotal power requirement:ca. 22 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
used
faceplate diameter:3500 mmswing diameter:3800 mmturning height:2300 mmmax. turning diameter:3800 mmtable load:40 ttable speeds:10 - 38 1/mintransmission ratio:2 Stufencross travel of ram-slide:rechts: 2500 mmcross travel of ram-slide:links: 2200 mmTravel of Ram (vertical):1500 mmtotal power requirement:70 kWRams:2 Stück
New in: 2017
used
turning diameter:450 mmturning length:1000 mmcontrol:FANUC OI TF max. swing over slide:260 mmbed width:300 mmspindle taper:A2-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000 mmrapid traverse x/z:12/15 m/minpower requirement:9 kWweight of the machine ca.:1400 kgdimensions of the machine ca.:2800x1215x1750 mmautomatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz 3 jaw chuck Ø:200 mmlive center:4 MK:aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TDMade in EuropeFor more information please see the attached documents
used
10.500 € Turning height approx. 1,050 mm, original turning diameter approx. 1,450 mm enlarged to approx. 1,650 mm, total height approx. 3,600 mm, weight approx. 18.7 t, electrics in order, incl. autom. Chip enclosure and extractor hood, Heidenhain control system as good as new, space requirement approx. 4,500 x 3,500 mm, turning diameter up to 1600 mm, attention! Damaged by flood damage, originally overhauled for €230,000 in 2018 by Mobeck, Attention! This machine has already been dismantled and is in storage.
New in: 1997
used
faceplate diameter:4000 mmswing diameter:4300 mmturning height:2060 mmspindle drive:55 kWCNC controller:NUM T PLUS 2 axis Used CNC Vertical Turret Lathe (overhauled in 2010).Further technical data and accessories, as defined in Appendix.Warranty: noTake advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it.
used
1.250 € Digital readout: Mitutoyo ... more information
used
330 € equipped with 1 SINO SDS6-2V digital counter; quick-change chisel holder with adapters; Pay attention Pick up 2nd day of delivery ... more information
New in: 2018
new
faceplate diameter:7100 mmswing diameter:8000 mmturning height:5000 mmtotal power requirement:DC 132 kWworkpiece weight max.:180 ttable speeds:0.2 ~ 20 U/minTorque:des Tisches 300 kN.mslide stroke:vertikal: 2500 mmram diameter:320 mmrapid traverse:2000 mm/mincontrol:CNC Siemens oder Fanuc _head swivability:-15°~+30 °weight of the machine ca.:127 tRams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories.Further technical details and accessories appearing in Appendix.
New in: 2005
used
swing diameter:400 mmcontrol:840 D SIEMENSturning speeds:3500 1/minz-axis:340 mmx-axis:1350 mmworkpiece height:400 mmTorque:820 turret head:12 Pos.rapid traverse:Z 30 / X 60 m/mintool holder:VDI 50 spindle head:A8 DIN 55026 spindle motor:60 kWweight of the machine ca.:14,8 tdimensions of the machine ca.:6 x 3,3 x 3,4 mlive tools,C-axis,workpiece storage left side,high pressure pump,chipconveyor,
used
3.100 € Equipped with three-claw.. ... more information
New in: 1999
used
Lathe with 4 tools only for 3-cylinder crank shaft ... more information
new
turning diameter over bed:850 mmturning diameter over slide rest:510 mmturning length:3000 mmtravel of cross-slide cross:600 mmmovement of the upper support:250 mmbed width:600 (Monoblock) mmspindle bore:100 mmspindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/minmetric threading:56,1~120 mmfeeds - longitudinal:0,08~9,6 mm/minfeeds - cross:0.04~4,8 mm/minrapid traverse longitudinal and cross:3640/1800 mm/mintailstock quill diameter:120 mmtailstock quill stroke:250 mmtaper in tailstock:6 MKmain drive motor:15 kWmax. workpiece weight between centers:4000 kgWeight approx.:6800 kgmachine width/height:1500x1500 mmmachine length:5150 mm4-jaw independent chuck:800 mmsteady fixed:Ø40~350 (mit Rolleneinsätzen) mmfixed steady:Ø100~520 (mit Rolleneinsätzen) mmfollower rest:Ø30~120 mmmultifix tool holder:Größe C Factory new heavy duty turning machine bran ...
used
20.000 € Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm ... more information
New in: 1999
used
turning diameter: mmturning length: mmcontrol: 840 weight of the machine ca.:14 tswing over bed:480 mmturning diameter over bed:330 mmturning diameter over bed slide:250 max. swing dia.:695 mm ... more information
New in: 1999
used
turning diameter:380 mmturning length:750 mmcontrol:Manual Plus Heidenhain spindle bore diameter:45 mmpower main drive with:11 / 9 kWmain spindle speeds::3800 1/minmachine weight ab.:1900 kgdimensions of machine:2400 x 1600 x 1900 mmteach-in lathe incl. electronic handwheelsincl. collet system 173 Estatic steadymoving steadycooling systemaccessories toolholder system PARAT 25 x 25manualssteady movedsteady rest3-chaw-chuck SCHUNK Rota S plus D = 250 mm Under power in our showroommain spindle with new bearings ( 0 hours working ) approx. 28.600 h "machine on"
New in: 1993
used
turning diameter:2000 mmfaceplate diameter:2000 mmmax. workpiece weight:6000 (fliegend) kgweight of the machine ca.:30 tmain drive motor:55 kW ... more information