lathes used for sale

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... more information

Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... more information

Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... more information

CONTROLS  CNC Teach In Controls NUM 1062 BASIC FUNCTIONS  number of x/z slides: 1   live positions: no WORKING RANGE TURNING  swing diameter (max): 570 mm  turning diameter (max): 365 mm  worpiece length max.: 1000 mmMAIN SPINDLE  spindle revolutions (min): 3 /min  spindle revolutions (max): 2500 /min  number of gears: 2   spindle diameter: 62 mmX/Z SLIDE  traverse velocity Z (min): 0 mm/min  traverse velocity Z (max): 10000 mm/min  traverse velocity X (min): 0 mm/min  traverse velocity X (max): 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  taper: MK 5 ELECTRICAL SPECIFICATIONS  mains power supply: 35 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space require ...

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... more information

CONTROLS  CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS  number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 420 mm  worpiece length max.: 1130 mmMAIN SPINDLE  spindle revolutions (min): 10 /min  spindle revolutions (max): 3000 /min  spindle bore diameter: 51 mmTAILSTOCK  sleeve stroke: 110 mm  sleeve diameter: 70 mm  taper: MK 4 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3500 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... more information

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmcentre distance:2500 mmspindle turning speed range:22,5 - 1120 U/minspindle motor:15 kWfeeds - cross:0,018 - 1,25 mm/Uweight of the machine ca.:6,0 ttotal power requirement:19 kWdimensions of the machine ca.:4,0 x 1,4 x 1,6 mMachine equiped with:- Heidenhain digital readout- 2 steady rests- rapid traverse- 3-jaw chuck, faceplate- splash cover- Multifix rapid tool changing system

CONTROLS  CNC controls FANUC 18 T BASIC FUNCTIONS  number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING  swing diameter (max): 700 mm  turning diameter (max): 700 mmMAIN SPINDLE  spindle revolutions (max): 3500 /min  spindle bore diameter: 91 mm  c-axis: yes COUNTER SPINDLE  Z-axis travel: 1105 mmX/Z SLIDE  X-axis travel: 362 mm  tool fixture: Turret   number of tool positions (total): 12 TOOL MAGAZINE  number of positions: 12 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4820 mm  space requirements -front/back-: 3200 mm  total height: 2300 mm &n ...

There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mmturning diameter over slide rest:345|480|680|880 mmturning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mmtravel of cross-slide cross:370|420|520|620 mmmovement of the upper support:200 mmbed width:600 (Monoblock) mmspindle bore:105mm (130 oder 155 opt.) mmspindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/minmetric threading:1~240 mmfeeds - longitudinal:0.1~24,3 mm/minfeeds - cross:0.05~12,5 mm/minrapid traverse longitudinal and cross:4000, 2000 mm/minturning tool - shaft cross cut:32 x 32 mmtailstock quill diameter:100 mmtailstock quill stroke:240 mmtaper in tailstock:6 MKmain drive motor:11 (15 kw opt.) kWmax. workpiece weight between centers:3000 kgWeight approx.:4t bei Spitzenw. 1000mm ( ...

CONTROLS  CNC Teach In Controls SIEMENS BASIC FUNCTIONS  design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 720 mm  turning diameter (max): 380 mm  bar diameter (max): 108 mm  worpiece length max.: 1500 mmMAIN SPINDLE  spindle revolutions (min): 0 /min  spindle revolutions (max): 1200 /min  number of gears: 3   spindle bore diameter: 108 mmX/Z SLIDE  traverse velocity Z (max): 5000 mm/min  traverse velocity X (max): 5000 mm/min  rapid traverse Z: 5000 mm/min  rapid traverse X: 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  distance betw. centers (max): 1500 mm  sleeve stroke: 200 mm  sleeve diameter: 120 mm  taper: MK 6 ELECTRICAL SPECIFICATI ...

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... more information

:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mmswing diameter:1350|1600|2000|2500 mmturning height:1070|1350|1350|1700 mmmax. turning diameter:1150|1350|1800|2300 mmtable load:4|5|8|10 ttable rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/minmax. torque on the faceplate:10000|12500|18500|54000 NmTravel of Ram (vertical):800 | 900 | 900 | 1000 mmTravel of ram (horiz.):1350 | 1475 | 1650 | 2275 mmram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mmrapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kWMachine height: 5330 |5500 |5500|6600 mmmachine length:4600 |4700 |5050| 4950 mmmachine width:5500 |5800 |6300|7320 mmweight of the mac ...

Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information

:YS-VL-3000 faceplate diameter:3000 mmswing diameter:3500 mmturning height:1650 mmmax. turning diameter:3400 mmtable load:40 ttable rotation speed:2-40/41-120 U/minmax. torque on the faceplate:64500 NmTravel of Ram (vertical):1000 (1400 opt.) mmTravel of ram (horiz.):2775 mm ram head dimension:280x280 mmrapid power traverse in X-and Z direction:10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) tool taper:SK50/BT50 drive capacity - spindle motor:60/75 (75/100) kWMachine height:6700 mmmachine length:6100 mmmachine width:8700 mmweight of the machine ca.:69000 kgrepeating accuracy:0,005 mmhydraulic motor:3,75 kWservo motor X-axis:7 kwservo motor Z-axis:7 kwcoolant pump drive:2,2+1,1 kW:150 kvaCNC controller:Siemens/Fanuc/Fagor coolant system:700 Literautomatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Siemens/Fanuc/Fagor ATC:320 ...

Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mmswing diameter:550|650|1000|1250 mmturning height:450|500|750/950|1000 mmspindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/minTravel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mmTravel of ram (horiz.):300|340|500|700 mmrapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/minTool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kWMachine height:2600|2910|4020|4605 mmweight of the machine ca.:4500|6000|13000|18000 kghydraulic motor:2,2 kWservo motor X-axis:1,6|1,6|4|7 kwservo motor Z-axis:3|3|7|7 kwcoolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW:35|40|50|70 kvaCNC controller:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fag ...

X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible. ... more information