Manufacturer:
(Category: 103)
X-travel: 600mm, y-travel: 400mm, z-travel: 350mm, clamping surface dimensions: 400x800mm, width T-slots: 14mm, max. workpiece weight: 300kg, connected load: 14kW, control: Heidenhain, length: 1700mm, width: 1700mm, height: 2000mm, weight: 2t, with documentation, an on-site inspection is possible. ... more information
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... more information
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
Travel X/Y/Z: 1050mm/530mm/630mm, rapid traverse X/Y/Z: 24m/min, max. spindle speed: 10000rpm, max. tool diameter/length: 90mm/300mm, max. tool weight: 7kg, tool storage: 30, tool holder: ISO40. Table dimensions X/Y: 1150mm/560mm, max. table load: 700kg. Dimensions X/Y/Z: approx. 4300mm x 2300mm x 2600mm, weight: approx. 7800kg. Including suction, 10.00 spindle, IKZ (stronger pump installed). Noises on the spindle, probably caused by ball bearing damage.
X-travel: 900mm, y-travel: 630mm, z-travel: 500mm, table dimensions: 1200x600mm, spindle drive: 15kW, tool holder: ISO/ SK 40, rotational speed: 20-6300/min, control: Heidenhain TNC 407, length: 3050mm, width: 2300mm, height: 2300mm, weight: 6.7t, with graphics screen, 40-fold tool magazine, vertical head, protective cabin, without chip conveyor and cooling lubricant device, was used for approx. 20 years in model making for plastic and wood processing, the control was replaced at the end of 2002, available from March 2024, can be inspected on site.
Controls: ELESTA, an inspection on site is possible. ... more information
With milling disks, tools and accessories, without documentation, on-site inspection is possible, year of manufacture unknown. ... more information
X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible. ... more information
X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... more information
X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible. ... more information
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... more information
Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible. ... more information
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced. ... more information
Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... more information
Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.
X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control pan ...
X-travel: 2000mm, y-travel: 1000mm, z-travel: 1000mm, table dimensions: 2200x1000mm, number of T-slots/ width/ distance: 7/ 22/ 140mm, max. workpiece weight: 7.2t, connected load: 40kW, weight: 17t, operational hours counter machine on: 33,852h, with documentation and accessories, without operating hours counter, has been regularly serviced, on-site inspection is possible, available from May 2024.
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... more information