Manufacturer:
(Category: 103)
Anzahl Achsen: 3, rotational speed: 450-2800/min, connected load: 6kW, weight: 2t, including accessories and documentation. ... more information
X-travel: 485mm, y-travel: 385mm, z-travel: 380mm, max. rotational speed: 3150/min, controls: DECKEL CONTOUR 2, with documentation, the machine has already been in storage for 18 months. ... more information
A Fluri milling machine with 360° rotating table is available. Travel X/Y/Z: 1200mm/700mm/300mm, max. speed: 2000rpm, table dimensions: 120mm/720mm. Accessories included. On-site inspection is possible. ... more information
Rotational speed: 112-3000/min, controls: SHW-NC, an inspection is possible. ... more information
X-travel: 600mm, y-travel: 400mm, z-travel: 400mm, spindle rotational speed: 63-3150/min, table dimensions: 800x400mm, tool holder: SK40, feed rate: 8-800/min, quill stroke: 105mm, connected load: 4kW, length: 2500mm, width: 2200mm, height: 2200mm, weight: 2.9t, with coolant device, chip guard and tool clamping.
X-travel: 550mm, y-travel: 400mm, z-travel: 400mm, max. rotational speed: 42.000/min, tool holder: HSK-40E, number of tool places: 100, connected load: 38kVA, controls: INGERSOLL ANDRONIC 2060, with tool measuring probe device m&h and tool laser measurement BLUM, automation with 8x EROWA UPC-320x320 pallet places and 140 EROWA-ITS50 electrode holder places, one adapter pallet UPC to ITS in automation, one gripper for ITS 50 in automation and job management via MultiCellPro additionally one external JobManagement PC.
Controls: Deckel DIALOG 11E, tools are available, number of operational hours unknown, was maintained regularly, an inspection is possible. ... more information
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... more information
X-travel: 600mm, y-travel: 400mm, z-travel: 500mm, table dimensions: 1000x400mm, rotational speed: 80-4000/min, tool cone: SK40, controls: Phillips 432/10, length: 2300mm, width: 2160mm, height: 1900mm, weight: 2.25t, operational hours counter: 49,567h. ... more information
Control: Deckel Dialog 11, with vice, an inspection is possible. ... more information
X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible. ... more information
X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available. ... more information
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, number of T-slots/width/spacing: 5/18/120mm, table dimensions: 1800x700mm, max. workpiece weight: 2.5t, connected load: 16.5kW, weight: 10.1t, with documentation and tool cones, without tools. ... more information
X-travel: 900mm, y-travel: 630mm, z-travel: 500mm, table dimensions: 1200x600mm, spindle drive: 15kW, tool holder: ISO/ SK 40, rotational speed: 20-6300/min, control: Heidenhain TNC 407, length: 3050mm, width: 2300mm, height: 2300mm, weight: 6.7t, with graphics screen, 40-fold tool magazine, vertical head, protective cabin, without chip conveyor and cooling lubricant device, was used for approx. 20 years in model making for plastic and wood processing, the control was replaced at the end of 2002, available from March 2024, can be inspected on site.
Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table. ... more information
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... more information
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... more information