milling machines used for sale

Bed type milling machine SHW UF 6, new in 1977, control system Siemens  ... more information

Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... more information

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories  ... more information

x-travel: 390/400 mmy-travel: 210/220 mmz-travel: 390/400 mmturning speeds: 25-2500 U/minfeed: 8-400 mm/minrapid traverse: 1500 mm/minquill stroke: 100 mmtool taper: Sk 40 x S 20 x 2 drive motor: 2,0/3,0 kWtotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: mOptical condition: good: Mechanic: good: The machine can be viewed under current.: 2202 11050380 V, 50 Hz, with CEE plug and cableColor greenEquipment: 3 Axis Active Digital Display (HH) TNC 113 Vertical head Sk 40 Coolant device Centralized lubrication pump Free-running safety wheels Stepless feed Emergency stop switch Engine brake New scrapers New bellows Great maintenance done Lockable main switch 10 tool holders fixed angle table (planed) Chip tray 4 machine shoes Cold light lamp Instruction manual, spare parts list, circuit diagram Control key u. driver ringMachine is workshop tested an ...

x-travel:2300 mmy-travel:1200 mmz-travel:950 mmfeed::max. 4000 mm/minspindle turning speed range:31,5 - 1.600 1/minspindle taper:SK 50 spindle drive:30 kWmilling head -swivable +/-:45 °distance spindle /table:max. 1200 mmtable surface area:3000 (4200) x 1200 mmtable load capacity:10000 kgControl:TNC 426 HEIDENHAIN weight of the machine ca.:38 tCNC milling machine,from 2008 with HEIDENHAIN TNC 426 control,in 2022 overhauled,2 pcs. workbenches2 pcs. tool cabinetlot of tools (around 140 pcs.),el. handwheelapprox. 69.000h "machine on, 18.500h "spindle on"very good condition, under power in factory

Double Spindle Copying Machine Metal, Plastic, Wood  ... more information

CNC drilling and milling machine with an indexed rotary table, stepless change of spindle speed, retractable spindle quill. In 2006 the machine tool underwent an electronic modernization - the control was replaced with a new PRONUM control. Machine tool, with manual tool change. Rotary table indexed every 90 ° with hydraulic lock. Type WFM-100N Built in 1978 PRONUM 640FC control Working table dimensions 1100x1100 mm Working table travels 1200x900 mm Headstock travel 1000 mm Spindle quill stroke 600 mm Pinola diameter of the spindle ø100 mm Min distance of the spindle axis to the work table 50 mm Table load / rotary table 3000 kg ISO 50 spindle, 18.5 kW, 1600 rpm Currently, the machine tool is used in the production department.

Used notching milling machine Manufacturer: ROTOX Type: SAF 163 Ma. No. 163093 built 1978 Power 2,2 kW Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to prior sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 – 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.

Description Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Technical data Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm

Article number: 07-07-112 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1978 L x W x H: approx. 2000x1500x1800mm Weight: approx. 800kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 400mm Y-axis: approx. 200mm Z-axis: approx. 400mm Table clamping surface: approx. 700x350mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8-400mm/min Rapid traverses: approx. 1.5m/min Accessories  Vertical & horizontal milling device  Work Light New  Coolant Device New  Complete documentation  Various tension wrenches  3-axis digital display SINO New  Spindle protection cap  Horizontal spindle cover cap � ...

This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads. One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work. After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities. The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position. Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam. ...

x-travel:700 mmy-travel:450 mmz-travel:450 mmtable surface area:620 x 1050 mmspindle taper ISO:40 milling spindle turning speeds:32 - 1600 U/minquill stroke vertical:125 feed speeds:0 - 500 mm/mintotal power requirement:7 kWweight of the machine ca.:3,5 tdimensions of the machine ca.:2,6 x 1,8 x 1,9 mwith 3-axis digital readout HEIDENHAIN autom. tool clamping Horiz. and Vert. Milling SpindleUniversal table turn-swivel and tiltable

X-travel: 1000mm, y-travel: 350mm, z-travel: 400mm, digital measuring system has been retrofitted, is no longer fully functional. ... more information

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg  ... more information

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmspindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1200 mm/mincreep feed: 4 mm/mincontrol: Heidenhain TNC 113 total power requirement: 1,6/2 kWweight of the machine ca.: 570 kgdimensions of the machine ca.: 1,2 x 1 x 1,75 mVideo available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mmTaper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of L ...

x-travel: 490/500 mmy-travel: 290/300 mmz-travel: 370/380 mmturning speeds: max. 2500 U/minfeed: 10-500 mm/minrapid traverse: 1500 mm/minquill stroke: 100 mmtool taper: Sk 40 x S 20 x 2 drive motor: 3,0 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: mMechanic: good: Optical condition: good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 central lubrication: 3 Achs Aktiv Heidenhain Digitalanzeige Zentralschmierung Abstreifer und Faltenbälge wurden getauscht Vertikalkopf Sk 40, Kühlmitteleinrichtung Spänewanne fester Winkeltisch 800 x 420 mm ca. 10 Spannwerkzeuge nach Wahl LED-Leuchte - auf Wunsch neuBedienungsanleitung, Ersatzteilliste, Schaltplan, BedienschlüsselMaschine ist werkstattgeprüft und mit elektrischem Prüfprotokoll !Maschine ist auf Wunsch bei Auslieferung an die Maschinenrichtlinien angelehntund dann mit einem verr ...

X-travel: 1800mm, y-travel: 600mm, z-travel: 500mm, tool cone: SK50, with documentation, was maintained regularly, an inspection is possible. ... more information

Travel X-axis 4000 mm Travel Z-axis 1600 mm Travel Y-axis 1100 mm Spindle travel - W axis 800 mm CNC type HEIDENHAIN control Table dimension: 6000 x 1235 mm (1 pc) Separate table dimension: 1500x1000 mm (2 pc’s) Spindle taper: ISO 50 Spindle speed: 5 x 1000 rpm. Spindle motor power: 18.4 Kw. Weight: 34000 kg Year of manufacture: 1979 Control replacement required: approx. € 13.500