Manufacturer:
(Category: 103)
max. wheel diameter: 350 mmgear width: 350 mmmax. module: 8 min. module: total power requirement: 7,5 - 22 kWweight of the machine ca.: tdimensions of the machine ca.: mGear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mmy-travel: 1200 mmz-travel: 900 mmtotal power requirement: 50 kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
x-travel:630 mmy-travel:200 mmz-travel:360 mmtotal power requirement:7,5 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:1500 x 1800 x 1900 mmspindle taper:SK40 table-size:250 x 1100 mm ... more information
Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t
Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -Clamping table: 490 x 400 mm -Travel path: X/Y/Z 320/385/430 mm -Spindle mount: SK30 -Drive: 1.1 kW -Speed speeds: 560 to 14000 rpm, 8 levels -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477kg
The machine is formed of the following main assemblies: floor table, left and right beds, gantry assembly (a saddle and a column on the each bed , a cross-rail, and a cross beam ) and two milling heads. The gantry is guided by the slideways of the two beds and the cross rail is guided by the slideways of the two columns. The milling heads travel on the cross rail guideways. Inside of the each milling head is guided a ram with the main spindle. Fixed table length 36 000 mm Fixed table width 6 000 mm Distance between columns with covers / without covers 6 900 / 7 100 mm Gantry travel 30 000 mm Cross rail travel 3 100 mm Milling heads (right and left) travel on cross rail 7 400 mm Vertical travel of right and left rams 1 000 mm Gantry work feeds 0 - 6 000 mm/min Gantry rapid feed 10 000 mm/min Milling heads (right and left) work feeds 0 - 3 000 mm/min Milling heads (right and l ...
bore capacity in steel (diameter): 23 mmx-travel: 400 mmy-travel: 285 mmtotal power requirement: 3 kWweight of the machine ca.: 1.400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
x-travel: 390/400 mmy-travel: 210/220 mmz-travel: 390/400 mmturning speeds: 25-2500 U/minfeed: 8-400 mm/minrapid traverse: 1500 mm/minquill stroke: 100 mmtool taper: Sk 40 x S 20 x 2 drive motor: 2,0/3,0 kWtotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: mOptical condition: good: Mechanic: good: The machine can be viewed under current.: 2202 11050380 V, 50 Hz, with CEE plug and cableColor greenEquipment: 3 Axis Active Digital Display (HH) TNC 113 Vertical head Sk 40 Coolant device Centralized lubrication pump Free-running safety wheels Stepless feed Emergency stop switch Engine brake New scrapers New bellows Great maintenance done Lockable main switch 10 tool holders fixed angle table (planed) Chip tray 4 machine shoes Cold light lamp Instruction manual, spare parts list, circuit diagram Control key u. driver ringMachine is workshop tested an ...
x-travel: 400 mmtool taper: SK 40 : schwenkbar table:: schwenkbar vice: . weight of the machine ca.: 1,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
x-travel: 700 mmy-travel: 250 mmz-travel: 470 mmtable-size: 1100x300 mmspindle turning speed range: 45-2000 U/minweight of the machine ca.: 2 tWith digital read-outPICTURES AND MORE INFORMATION ON www.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... more information
No. 2179: 1 used Universal tool milling machine MAKE HERMLE, type UWF-801, built 1980 with Heidenhain TNC-124 track control Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid table 800 x 350 mm, Chip tray, automatic tool clamping, Coolant device, operating instructions, electronic handwheel in the control panel Other: Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid speed 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1100 kg.
Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition
Very good condition, regularly maintained Control: Heidenhain track control Axles: 3 Vertical and Horizontal Spindle X-axis travel : 500 mm Y-axis travel : 400 mm Z-axis travel: 400 mm Direct displacement measuring system Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle:80 mm Spindle speed: 40-2,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 6.63 kW Weight approx.: 1900 kg Dimensions LxW approx.: 2360x2170 mm
X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible. ... more information
Copy milling machine Fluri F 14 sec copy milling machine Country of origin: Switzerland Year of construction: 1980 Control Heidenhain TNC 131 Original price at that time: approx. 700,000.00 DM (357,904.32 €) Working rotary table 1200 x 700 Model table 800 x 700 Commuting to work X 1200 mm Y 700 mm C 360 degrees Z 700 mm W 300 mm B +/- 45 degrees Max. table load 3000 kg Gross machine weight 13000 kg Total connected load 52 KW Packages for transport: 1.) Machine height 3000mm x length 3430mm x width 3200mm 2.) Lattice box 3.) Euro pallet with hydraulic power unit 4.) Control cabinet on Euro pallet approx. 2000mm wide The machine can be disassembled for transportation as follows: Without leveling feet, the tiller has a height of exactly 3000 mm the length of the machine is: 3430 mm the width is 2530 mm if we disassemble the motor from the Y-axis Location ...
Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min,eilgaenge 4 m/min, weight approx. 1.5 t ... more information
inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/mindrive motor: kWdistance spindle - column: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: 3 phase A.C. 380 V control voltage 220 V  ,Approx. Onsite Dimension. (l x w x h): 1,300 x 1,250 x 2,450 mm, weight approx.: 1,420 kg ... more information