milling machines used for sale

For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.

Article number: 07-99-001 Manufacturer: Fritz Werner Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1900x1800x1800mm Weight: approx. 1200kg Travel: X-axis: approx. 600mm Y-axis: approx. 200mm Z-axis: approx. 500mm Table clamping surface: approx. 740x220mm Spindle: Speed range: approx. 3000rpm Drive power: approx. 7.5kW Feeds & rapid traverses: in all 3 axes Max. milling area (dovetail): approx. 400mm width Swivel range 1st & 3rd milling spindle: approx. 50-80 degrees Height adjustment 1st & 3rd milling spindle: approx. 80mm Height adjustment 2nd milling spindle: approx. 50mm Accessories  Left/Clockwise  Mechanical vise  10 pieces of various milling head attachments  Work light Other accessories on request Price and other technical data on request

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Safety handwheels  Horizontal spindle cover cap  3-axis digital display SINO New  Machine feet  Tilting swivel table  electrically moni ...

Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO New  Machine feet New  ...

Article number: 07-07-090 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO New  Tilting swivel tab ...

Article number: 07-07-171 Manufacturer: Mikron Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1700x1800x1800mm Weight: approx. 1500kg Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 500mm Y-axis: approx. 500mm Z-axis: approx. 380mm Table clamping surface: approx. 700x500mm Spindle: Speed range: approx. 50-2240 rpm Tool holder: ISO 40 Drive power: approx. 3.5kW Feeds & rapid traverses: in all 3 axes Feed range: approx. 1-630mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Angle milling head with drill quill  Coolant device  Complete documentation  Various tension wrenches  Work light  Various tool holders Other accessories on request Price and other technical data on re ...

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Cover FP2: Refurbished Specifications: Tool holder: SK40, M16 tightening spindle Travel X/Y/Z: 400 / 220 / 400 mm Speed range: 25 - 2500 1/min Spindle stroke: 95 mm Feeds: 5 - 500 mm/min Table size: 665 x 375 mm Swivel head: yes Motor power, 2 stages: 2.0 / 3.0 kW Connection: 400 V Weight, approx.: 1250 kg Dimensions (WxDxH), approx.: 1200 x 1470 x 1800 mm Equipment: - 3-axis digital display - Drill quill - Spindle protection - Rapid traverse - Emergency stop push button - Machine lamp - Coolant device - Machine shoes The following work was carried out: - Machine completely disassembled - All bearings replaced - Partially renewed gear pairings - Guided guides ground - Table tops - Universal table ground - Guided tours scraped - Bellows renewed - WZ mount ground - Machine repainted - Glass scales overhauled - Test protocol of the machine geometry acc ...

x-travel: 600 mmy-travel: 410 mmz-travel: 200 mmturning speed range - horizontal: 30 - 1280 U/minturning speed range - vertical: 50 - 2150 U/minmilling-head swivable +/-: 90° spindle taper ISO: SK40 table surface area: 1000 x 315 mmtotal power requirement: 3,2 kWweight of the machine ca.: 1,44 tdimensions of the machine ca.: 1,6 x 1,7 x 2,1 mUniversal tool milling machine- Digital display- horizontally milling device- Coolant system- Vise- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 460 mmtable surface area: 1000 x 500 mmspindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/minfeeds longditudinal/cross/vertical: 1 - 3000 mm/minrapid traverse longitudinal and cross: 6 m/minrapid traverse vertical: 4 m/minquill stroke: 110 mmdistance spindle nose and table: max. 559 mmtable load capacity: max. 500 kgtotal power requirement: 14 kWweight of the machine ca.: 3,1 tdimensions of machine L x W x H: 2,15 x 1,8 x 2,15 mAccessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 870 mmy-travel: 370 mmz-travel: 400 mmnumber of feeds: 9 feed range lengthways and crosswise: 20-800 mmrapid traverse longitudinal and cross: 3000 mm/minrapid traverse vertical: 1375 m/mintable-size: ca. 310x 1370 mmthroat: ca. 330 mmweight of the machine ca.: 2,4 tdimensions: ca. 1900 x 2800 x 1800 mmcover plates available (these are missing in the pictures, but they are there!)manual available!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12200 mmy-travel: 4400 mmz-travel: 1000 mmw-axis: 2320 mmdistance between columns: 3700 mmtable load: 200 tmilling slide: 120 kWspindle turning speed range: 6 - 750 U/minmax. torque on the spindle: kNmtool taper: ISO 50 / 60 feed in x - axis: mm/minfeed in y - axis: mm/minfeed range Z-direction: mm/mintable-size: 11000 x 3200 mmcontrol: Siemens 840C ram head dimension: 600 x 600 mmworkpiece height max.: mmtotal power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: 33 x 12 x 7,1 mPortal milling machine equipped with:- CNC control Siemens 840CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 15300 mmy-travel: 4950 mmz-travel: 1000 mmw-axis: 3682 mmdistance between columns: 5100 mmtable load: 400 tmilling slide: 120 kWspindle turning speed range: 5 - 600 U/minmax. torque on the spindle: kNmtool taper: ISO 50 / 60 feed in x - axis: mm/minfeed in y - axis: mm/minfeed range Z-direction: mm/mintable-size: 15000 x 4500 mmcontrol: Siemens 840C ram head dimension: 600 x 600 mmworkpiece height max.: mmtotal power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: 41 x 13,7 mPortal milling machine equipped with:- CNC control Siemens 840C- Head changing station with X-stations- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

SN: 63341 / Maho MH 600 E Used machine - free of third-party rights - without warranty.  ... more information

Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!  ... more information

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !  ... more information

Machine Type: NC Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 3 A Year of construction: 1981 Condition: very good Offer Type: Used Machine Specifications: Control: CNC 2101 Positioning Track Control Table: 800 x 460 mm Travel range: x = 500 mm y = 300 mm z = 400 mm Speed range: 25 - 2500 rpm. Spindle holder: SK40 with automatic tool clamping Propulsion: 2.0 / 4.0 kW Remark: NC and conventional operation possible, with handwheels in all axles, Drilling quills in vertical and horizontal, Central lubrication Machine light Weight: 1700 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.