- Arc welding machines (1)
- Bevel Edge Welding Machines (3)
- Beveller (5)
- Bolt welding machines (4)
- Butt Welding Machines (10)
- Circular Welding Machines (1)
- Container Rotating Stands (4)
- Cutting Torches (1)
- Electric Welding Machines (6)
- Electrode Welding Equipment (24)
- Flash Butt Welding Machines (6)
- Flash welding machines (2)
- Forming Gas (1)
- Friction welding machines (4)
- Heating Elements (1)
- Inert Gas Welding Equipment (7)
- Laser Cutting Machines (24)
- Laser Systems For Welding (7)
- Laser Welding Systems (7)
- Longitudinal Seam Welding Machines (1)
- Magnetic Welding Tractors (1)
- Mesh Welding Machines (6)
- MIG MAG Gas Shielded Welding Equipment (157)
- Mobile Welding Fume Filters (1)
- Motor Vessel Rotators (8)
- Pipe Cutting Equipment (1)
- Pipe welding machines (2)
- Plasma Arc Welding Systems (1)
- Plasma Cutting Systems (32)
- Plasma welding machines (1)
- Projection Welding Machines (3)
- Resistance welding equipment (1)
- Robotic Welding Cells (11)
- Seam welders (1)
- Special welding machines (3)
- Spot Welding Machines (60)
- Stud Welding Equipment (1)
- Transformers (2)
- Ultrasonic welding machines (1)
- Ultrasound cutting machines (1)
- Welding Beams (3)
- Welding Equipment (56)
- Welding Fumes Extractors (13)
- Welding Machines (25)
- Welding robot systems (3)
- Welding Robots (24)
- Welding Rotary Tilting Tables (16)
- Welding Tables (60)
- Welding Turntables (37)
- more
- AARDING (1)
- ABB (10)
- ABITIG (2)
- Air Liquide (2)
- AK BEND (1)
- AK-BEND (4)
- AKYAPAK (4)
- ALLOY (1)
- ALME GERIMA (1)
- ALPHA LASER (2)
- Alphaforce (2)
- Alphaweld (2)
- ALU (1)
- Amada (4)
- APS (2)
- Arcair (2)
- Arcos (3)
- ARNHOLD (1)
- ARO (11)
- ART WELDING (1)
- ART-WOS (1)
- Artec (2)
- ARTEC THREEWELD (1)
- ASPA (1)
- ATF (1)
- AUER (1)
- Avesta (8)
- AWS (1)
- BAC CAINSDORF (1)
- BACH (1)
- BARTOM (6)
- BDS Maschinen (2)
- BECK (1)
- BENDMAK (1)
- BEWO (1)
- Bihler (2)
- Binzel (10)
- BLM ADIGE (1)
- BOeHLER (3)
- BOLDRINI (1)
- BOSCH (1)
- BROWN BOVERI (1)
- Bystronic (16)
- Böhler (31)
- Böhler Thyssen (3)
- Castolin (2)
- CASTOLIN - EUTECTIC (1)
- Castolin Eutectic (6)
- CEA (1)
- CEBORA (8)
- CENTROMAT (1)
- CEVISA (1)
- CIFES (1)
- CLOOS (14)
- COMMERCY SOUDURE (1)
- CONTI-WELD (1)
- Copper (4)
- CR ELECTRONIC (1)
- DALEX (45)
- DAPENG (1)
- DELTATHERM (1)
- DEUMA (5)
- DEUMA-HEITZE (1)
- Dinse (23)
- DOMINO (1)
- DRA TEC (2)
- DRATEC (3)
- DREHTISCH (1)
- DRESS WERKZEUGE (1)
- DRäGER (1)
- DUMETA (56)
- DYNAMIC POWER LASER (1)
- DÃœRING (1)
- E-TECH TRUMPF (1)
- ECO CRANES (1)
- EDECO (1)
- EG (1)
- Elga (11)
- ELGACORE (1)
- ELMA-TECH (1)
- Elmatech (3)
- ELMEATECH (1)
- ELUMATEC (2)
- EMA (1)
- EMW (1)
- EP Systems (2)
- EP-Systems (2)
- EPDM (2)
- ERGOPLUS (1)
- Ermaksan (2)
- ESAB (48)
- ESAB Retrofit 2009 (2)
- ESAB-PEMA (1)
- ESFA (1)
- ESS (25)
- EST-DRESDEN (1)
- ESTA (3)
- ETA (4)
- EUEN (2)
- EUROMATE (1)
- ... more
Manufacturer:
(Category: 108)
used
used
50 € Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact ... more information
used
10 € Arc welding device (electrodes). -Can be used on both 230 and 400 volts. -Incl torch and clamp. ... more information
used
used
used
used
4.500 € The machine was last serviced in 2019. The machine has been in our possession since 2020 and only ran for test runs. Due to the fact that we no longer needed material for our orders that the laser produces, we have stopped using it. This is also the reason for the sale now. There are a total of 4 cutting heads: 1 piece 3.75"D 1.5"HD; 1 piece 5"D 1.5"HD; 1 piece 7.5"D 1.5"HD; 1 piece 10"D 1.5"HD. The machine also has an additional loading device. Trumpf L3030. Unfortunately, no test run is possible on site because there is no more gas available. But booting up the machine is no problem.
used
used
used
used
250 € Plasma cutting machine; Max. cutting thickness 20 mm; adjustable current: 20 - 40 amps; IGBT technology; Function: plug for CNC control; accessories and protective cover included; unused and in the original packaging ... more information
used
used
250 € MIG welding machine. -Water-cooled. -Separate wire case. -Long hoses package. -Mobile. ... more information
used
used
used
used
250 € Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets of welding data memory, 2T/4T function, double pulse function VRD, 4 drive supply, 5 total support ... more information
used
10 € Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig ... more information
used
used