Manufacturer:
(Category: 108)
cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden ... more information
Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg ... more information
Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate ... more information
rated capacity: 10,0 kVA 50% EDwelding power: 20,0 kVA max.contact pressure capacity: 220 daNthroat: 520 mm0: 380 Velectrode stroke: 15 - 85 mmweight: 95,0 kgrange L-W-H: 1000 x 400 x 1100 mmFurnishing:- Spot welding machine from a training workshop- Welding control TE 90 Mark IIWelding control TE 90 is a microprocessor control for single-phaseResistance welding machines. The welding control has the task of:To control machine elements, especially the SCR, which controls the setting of the Control welding current. The duty cycle that the TE 90 performs isdescribed using the programming parameters.- Synchronous control SCR, welding time regulation by phase cut- Easy programming via 4 buttons- Current surge and pulsing- Single point and automatic- Compensation of the secondary current for welding dirty metal sheets and wires- Welding time locking optimizes power consumption from the mains- ...
Knife Cortina 2600. Year of construction: 1994 Control KS 20A plasma: Hypertherm MAX 100 (cut up to 30mm) The vacuum table: 1500 x 3000 mm. With only a torch cart instead of 2 or 3, you have a working width up to 2000 mm. The box program on the PC is the OmniWin CAD. Exhaust system: Donaldson 5.5 KW To visit, now available under current Commissioning on request
Knife Cortina 2600. Year built:1994 Control KS 20A Plasma: Hypertherm Max 100 (cutting up to 30mm) The suction table: 1500mm x 3000mm. With only one burner car instead of 2 or 3, you have a working width of up to 2000mm. The box program on the PC is the OmniWin CAD. Extraction system: Donaldson 5.5 KW to be visited under electricity commissioning on request
Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm Total system space requirem ...
SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014
; ready for immediate use ... more information
; available as of week 20/2014 ... more information
Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 [mm]. Bimetal strip up to 80 [mm]. Connection: 400 [V]. Weight: 500 [kg]. Dimensions (WDH): 14009001500 [mm]. Instructions and packing included.
Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg
Machine type: MIG/MAG welding system Made by Werner Type Type 200 Connection voltage 3 x 400 Volt Adjustment range 40 – 200 amps Duty cycle 60% ED at 200 amps 100% ED at 160 amps Current Adjustment 16 Switching Levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller gearbox Fuse protection 16 amps Dimensions L x W x H 850 x 360 x 700 mm Weight 85 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 can of non-stick spray 1 pair of welding gloves 1 piece spare parts box cpl. Equipped Warranty 6 months from the date of delivery Factory list price from stoc ...
Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package . ... more information
table-size: 300 x 300 mmfrequency: 20 kHzcontrol: HS DIALOG 2012 control: active control connected load: 4,5 kW= ultrasonic welding machine -- price new 36.000,00 EUR -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Volume flow 1000m3/h Connection voltage 400V The welding smoke extractor is in good condition. ... more information
current intensivity: 300 Aweight of the machine ca.: 0,3 t: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Specifications: - Compact system with tip ignition and automatic bolt feeding - Suitable for flange bolts EN ISO 13198 - Bolt diameter 3 to 8 mm - Bolt length 6 to 300 mm - Power plug 220 V - Table height 950 mm - Space requirement approx. W 1900 x H 1600 x D 800 mm - Weight approx. 150 kg
under electricityinformation on request; ready for immediate use ... more information
under current Details on request ... more information