rubber machines used for sale

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment ... more information

Berstorff Cracker Mill with Roll dia 600 x 800mm Description attached!  ... more information

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls  ... more information

Farrel Pomini Mixer Type OOC A2 Velocita mixer Steam / water gauges Leeds temperature recorder ISF cabinet  ... more information

Fogg &Young C Frame Press 3400mm wide Upstroking 3x heating zones Eurotherm controllers  ... more information

Bale cutter Year: 1980’s 22 Ton cutting force Pressure pump (77 lit./min.) Engine = 15 HP Table (working) dimension: 1150 x 1150 x 850 mm knife width : 800 mm Complete with motor and starter Machine dimension: 1700 x 1150 x 3500 mm (LWH)  ... more information

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

roll diameter: 200 mmroll length: 400 mmrolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 1 year warrantySpecification: Monobloc laboratory rolling mill 200 x 400 mm - new- roll diameter: 200 mm- roll length: 400 mm- roll bore: peripherally drilled- Single drives: variable friction ratio- Roller bearing: bearing with grease lubrication- Gap adjustment: hydraulic- new hydraulic unit for roll gap and emergency system- New rotary unions make Johnson-Fluiten- two adjustable guide plates to reduce the to reduce the working area- Stainless steel tank- New safety cage- 2x AC brake motors make Siemens: each 5,5 kW, 400 V, 50 Hz- Painting: with RAL  ...

machine measurements: Länge ca. 21.000 mmmachine weight: -- kgpower capacity: 200 kWCondition: used,Specification: 21m post-heating duct with heat exchanger- length approx.: 21.000 mm- consisting of: 21.000 mm heating channel, incl. heat exchanger- extrusion height: 1.100 mm- Extrusion direction: from right to left- 4x burners with 50kW burner each- Tempering range: 240°C - 340°C- Heating: gas heated- Control system: SiemensHeating duct extension by 2x 3m, 2015- The duct was extended by 2x 3m segments in 2016- The burners of the 21,000 mm system were renewed in 2015The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mmmachine weight: -- kgpower capacity: 170 kWCondition: used,Specification: 12m heating duct incl. PCT- length approx.: 12.000 mm- extrusion height: 1.100 mm- extrusion direction: from right to left- belt width: 150 mm- Channel width: 190 mm- At the inlet and outlet there is a 50 kW burner each- In the PCT there is a 70 kW burner- Temperature range: 240°C to 340°C- Heating: gas heated- Belt speed: 2-40 m/min- Control: Siemens S7Relocation date no later than mid-June 2022.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mmmachine weight: -- kgpower capacity: 182 kWCondition: used,Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12- length approx.: 12.000 mm- Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT- UHF power: 4x 3 kW- Temperature range UHF part: 240°C - 340°C- Temperature range shock module: 240°C - 500°C- Shock module with non-driven metal rollers- Extrusion height: 1,100 mm- Extrusion direction: from right to left- At the infeed and outfeed one 50 kW burner each- PCT burner capacity: 70 kW- Heating: gas heated- Control: Siemens S7Relocation date no later than mid-June 2022.The data for this ad was create ...

J. Robinson 500ton Upstroke Press Manufacturer: J. Robinson Upstroking Platen size 1.5m x 1.5m sq. 1x daylight 900mm Steam Platens 4x Rams 400mm each With pump unit Complete with modern panel  ... more information

clamping force: 250 kNinjection volume: 49 cm³screw diameter: 25 mmplaten size: 300 x 300 mmCondition: used,specification: C-frame injection moulding machine - usedclamping unit:- clamping force: 250 kN- heating platen size: 300 x 300 mm- clamping/opening stroke: 330 mm- Closing direction: from below- Lateral ejector: yes- Ejector stroke/force: 115 mm / 12 kNInjection unit:- Injection volume max.: 49 cm³- Screw diameter: 25 mm- Screw length: 16- Screw speed max.: 250 rpm- Injection: from above- Voltage: 3x 400 V, 50 Hz, N, PE- Connected load: 55 kW/92 A- Weight approx.: 3,500 kgVarious accessories are also available:- Injection unit (25 screw)- 2 heating plates- Funnel and various small partsThe data for this ad was created with ModulMWS - ...

machine measurements: 2.200 x 1.200 x 2.260 mmmachine weight: 1.000 kgpower capacity: -- kWCondition: usedSpecification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations- year of construction approx.: 2011 - pick-up stations: 16- measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm)- Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day- Technical application: surface defect and crack detection on O-rings- Sorting function: Good, Bad, Undefined- Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm-  ...

For deutsch description pls. look dwon below Internal mixer of the type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with interlocking rotors, hydraulic feeding The machine is currently disassembled and can be visited. All parts have been technically tested (tightness, wear, other damage). A complete refurbishment is recommended and can be carried out by us. In the case of refurbishment, we give you a 12-month warranty from delivery. Internal mixer type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with intermeshing rotors, hydraulic feeding. The machine is currently disassembled and can be inspected. All parts have been technically checked (tightness, wear, other damages). A complete reconditioning is recommended and can be done by us. In case of reconditioning we give you 12 months warranty from delivery.

screw ø:: 90 mmscrew length:: 20D screw speedl:: 0 - 60 U/minCondition: NEW,Specification: Rubber vacuum extruder - with warranty- Screw diameter: 90 mm- Screw length: L = 20 D (approx. 1,800 mm conveying length)- Screw speed: 0 - 60 rpm- Centre height of extruder: approx. 1,125 mm incl. base frame- Max. permissible injection pressure: 500 bar- with feed roller- Extruder water-tempered- Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump- Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm- Vacuum cylinder: three tempering zones BL = 1,057 mm- End cylinder: one temperature control zone  ...

machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60- batch volume approx.: 1-600 litres,- working temperature: - 150°C- drum speed: 5 - 30 rpm- Blast wheel speed: 1,000 - 9,500 rpm- Control: Siemens S7 SimaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 850 x 1.800 x 1.450 mmmachine weight: 360 kgpower capacity: 0,7 kWCondition: newSpecification: Powder coating machine, type: EPC-30/2EThe machine is designed for the powder coating of cables, hosesand profiles.- Product diameter max.: 30 mm- Product speed max.: 1,500 m/min- Powder throughput min.: 30 g/min with fine dosage- Powder throughput max.: 400 g/min per powder injector- Electrostatic: available as option- Connected load: 0.7 kW- Dimensions LxHxW: 850 x 1,800 x 1,450 mm- Weight approx.: 360 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 100 mmcross-section heigth:: 40 mmfeed:: 2 - 999.999,9 mmCondition: new,Specification: Impact knife cutting machine CC-600/40 for hoses and profiles- contact length: 600 mm- product diameter: 40 mm- belt width: 100 mm- Tractive force: 400 N to 800 N- Drive: 2 drives upper and lower belt- Conveyor belt speed: 100 m/min- Drive feed, cutting motor: Servo drives- Cutting capacity with blade max.: 4,000 1/min- Connected load: 3.5 kW- Dimensions L/H/B: 1,900 x 1,650 x 960 mm- Weight approx.: 580 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.