rubber machines used for sale

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation  ... more information

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler  ... more information

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts  ... more information

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

ITAL Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6.37 bar Test pressure – 8 bar Manufacturer – ITAL-RUBBER Insurance certificate –(last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1990 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Shaw Intermix K4 MK5 Mixer Body and Hopper Foot-Center of Shaft= 700mm. Diameter of Shaft: 180mm. With dust seal holders and drop door motor Without brass dust seal rings  ... more information

Z-Splicing Machine Make: Z-AUTOMATION Model: Z splicing stand alone Year 2014 8 kW, 6 bar Profile Cross sections 50 x 40 mm 2 - 4 splicing cavities Length 4600 mm Siemens Simatic HMI touch screen control Foot pedal control Emergency kill switch  ... more information

LWB Steinl Injection Moulding Machine Model VCE-T-TPE-EPDM 100 ton capacity ECO touch screen control  ... more information

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs  ... more information

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs  ... more information

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010  ... more information

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs  ... more information

HUSKY Injection Machine Type H400 400 tonne Hydraulic Pressure 180 BAR max Weight 18,143 kg CE marked Year: 2003  ... more information

cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

clamping force: 800 kNinjection volume: 78 cm³screw diameter: 25 mmplaten size: 570 x 552 mmCondition: used,Specification: injection moulding machine for LSR - used Nr. 13EN08clamping unit:- clamping force: 800 kN- size of heating platen: 570 x 552 mm- Between tie bars horizontally: 405 mm- Between tie bars vertically: 345 mm- Opening stroke: 310 mm- Ejector force: 25.4 kN- Ejector stroke: 100 mm- Mould installation height max.: 530 mm- Mould installation height min.: 250 mm- Bar diameter: 60 mm- Control: CC 90-A0Injection unit:- Injection volume max.: 78 cm³- Injection weight max.: 90 g- Screw diameter: 25 mm- Metering stroke: 160 mm- Screw speed max.: 20 - 400 rpm- Injection flow: 87 g/sec- Injection flow (increased): 64 g/sec- Sp ...

clamping force: 800 kNinjection volume: 154 cm³screw diameter: 35 mmplaten size: 570 x 552 mmCondition: used,Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit:- clamping force: 800 kN- size of heating platen: 570 x 552 mm- Between tie bars horizontally: 405 mm- Between tie bars vertically: 345 mm- Opening stroke: 310 mm- Ejector force: 25.4 kN- Ejector stroke: 100 mm- Mould installation height max.: 530 mm- Mould installation height min.: 250 mm- Bar diameter: 60 mmInjection unit:- Injection volume max.: 154 cm³- Injection weight max.: 156 g- Screw diameter: 35 mm- Metering stroke: 160 mm- Screw speed max.: 20 - 320 rpm- Delivery flow: 35 g/sec- Injection flow: 148 g/sec- Injection flow ...

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm ... more information

Profile extruder, GE 90 x 16 D vacuum, make Troester, cold lined ... more information