rubber machines used for sale

roll diameter: 250 mmroll length: 500 mmrolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls  ... more information

roll diameter: 350 mmroll length: 700 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 2x 15 kWCondition: new, with CE mark,Specification: Two Roll Mill 350 x 700 mm - new- cylinder diameter: 350 mm- cylinder length: 700 mm- cylinder boring: peripherally drilled- cylinder bearings: with grease lubrication- 2 cylindera chromed- nip admustment: hydraulically- new hydraulic unit- tipper guiding plates of nylon-polyethylen-material- stainless steel tray- bi-directional bars- AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz- bevel gearboxes of transmission: 2 pcs- painting: with RAL colours acc. to customer’s specification- complete machine protection with stainless steel carters- new electric cabinet- new electrical system- new machine on-board system- new control panel Touchpanel 7- PLC system: 1 piece, brand S ...

Cemax M2 Router X,Y,Z Working Area: 1300x2500x200mm X,Y,Z Traveling Positioning Accuracy: ±0.05mm X,Y,Z Repositioning Accuracy: ±0.05mm Table Surface: Vacuum table Max.Traveling speed: 60000mm/min Max. Working Speed: 25000mm/min X,Y axis transmission: Herion gear rack Z axis transmission: ball screw Reducer: Japan Xinbao reducer Spindle Power: Ronghua 6KW water cooling spindle Drive Motors: Leadshine 850W Servo motor Working Voltage: AC380V/50Hz/3PH Operating System: Ncstudio Control System

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- Safety brake for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New frequ ...

roll diameter: 550 mmroll length: 1500 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 90 kWCondition: used, overhauled Specification: rolling mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- monoblock - motor under the rolls- Fixed friction between the rolls- Rolls: peripherally drilled, for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable steel material guide jaws- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- Safety brake for EMERGENCY STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety bars bi-directional- New electrical control cabinet with PLC system S7-1200 ...

roll diameter: 600 mmroll length: 1800 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch 0total power requirement: 132 kWCondition: used, completely overhauled, with warrantySpecification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers- Roll diameter: 600 mm- Roll length: 1800 mm- Roll core with central chamber for water cooling- Friction between the rollers- hydraulic gap adjustment: new- Hydraulic unit: new- Tilting guide plates made of steel- Rollers on bronze bearing bushes with recirculating oil lubrication via pump- Rollers with new ball slewing rings, make Maier, for connection to the water circuit- AC main motor: 132 kW - 400 V - 50 Hz- Safety brake for EMERGENCY STOP- Stainless steel roller container to hold the mixture- bi-directional safety bars- Visual indication of the gap between rol ...

cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECO TS10 Deflashing Machine Year 1991 +/-  ... more information

Farrel Twin Screw Extruder EXTRUDER Type: TSS-12 Year 2009 With double screw for processing rubber Extruder screw speed (Max.): 15.2 RPM Motor 175kW, 1485 rpm Without Control Panel  ... more information

Farrel Bridge BR Mixer (Lab BR Internal Mixer) Capacity of chamber 1.6 litre RPM 1420/960 730/350 HP 25/17/12.5/8.5 Motor 380 / 420 volts With Gearbox Cooling water / steam Complete with Control Panel  ... more information

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel  ... more information

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: °Cpiston stroke:: ca. 500 mmno. of stages:: 1 Condition: Used, overhauledSpecification: 4-column vulcanising press 480 x 520 mm, used- closing force: 100 t- closing: from top to bottom- heating plates: 2 electric plates- New heating platens- Dimensions of heating plates: 480 x 520 mm- Distance between heating platens approx.: 500 mm- AC motor: 5,5 kW- New electric valves- New control cabinet with Siemens 7 touch panel- SPS system Siemens S7-1200- Frequency converter make Schneider- New cabling- Light curtains in the front operating areaOverhauled according to CE standard safety regulationsOperating and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the  ...

Iddon Two Roll Mill 6” diam. x 12” wide Fully guarded and interlocked  ... more information

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating  ... more information

roll diameter: 400 mmroll length: 1000 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

roll diameter: 400 mmroll length: 1100 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: Hydraulisch total power requirement: 150 kWCondition used, refurbished, Specification Roll mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- Variable friction ratio between rolls - cored rolls with central chamber for water cooling- nip adjustment: NEW hydraulical- hydraulic unit: NEW- tipper guiding plates- cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit- N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz- mill tray to contain compound- bi-directional bars for safety system- visualization display to monitor gap between rolls an ...

roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

roll diameter: 150 mmroll length: 300 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch total power requirement: 4 kWcondition: used, overhauledSpecification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers- Roller diameter approx.: 150 mm- roller length: 300 mm- Friction between the rollers- Rolls drilled with central chamber for water cooling- Rolls with new slewing rings, manufacturer MAIER, for water cooling,- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- Gap adjustment: NEW, hydraulic and as emergency system- Hydraulic unit NEW- NUE Tilting guide plates- NEW safety cage- Safety brake for emergency stop- AC brake motor: 4 kW - 400 Volt - 50 Hz- new mixing tanks made of stainless steel for the mixture- Safety devices according to current EN 1417:3/2015- Painting: in RAL colours according to ...