other machines for plastic used for sale

VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5

ProJet 2500 Plus in very good condition, last maintenance 03/2024. Accessories: 3DS-MJP-ECS 93902324 consisting of MJP EasyClean System 230V and post-processing system, originally packaged particle filter 93902710, Installation: 2020, Print modes: HD - High Definition, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, resolution (xyz) resolution (xyz) hd mode: 800 x 900 x 790 DPI; 32μ (0.0012 in) layers, Support materials: VisiJet® M2 SUP, Building material build material: VisiJet® Armor M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL    – Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet® M2R-WT   – Rigid whiteVisiJet® M2R-BK    †...

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw  ... more information

 ... more information

complete plant multi filament polypropylene yarn 2 independent lines compound: 2 extruders diam. 45mm complete with dosamaster 2 ironing groups of 6 godets each 6 COMOLI winders 1 ATLAS COPCO 18+ compressor 1 chiller spare parts various dies for both solid wire and hollow wire hourly production about 50 / kg hh with a title of 1500 den

The machine for the production of polyurethane foam (polyurethane foam) MODEL BLCR35 is intended for mixing and feeding a two-component polyurethane system for the production of rigid foam with self-extinguishing properties into a mold (door leaf). The BLCR35 model is a low pressure foaming equipment. The mixing head is cleaned by flushing with a cleaning agent dichloromethane (dioctyl phthalate can also be used for cleaning).

Piovan MDW70 gravimetric dispenser, year of production 2007, new never used ... more information

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.

Full Description Variable angle fences enable the Wegoma WSA-1-E to achieve welded angles between 30° and 180° on 150mm, 180mm and 225mm cills. The WSA-1-E boasts the ability to achieve double-reverse butt welding thanks to the large setting and heater plates. ... more information

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

Mixer for plastics CONBOPLAS SRL8002000754 The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. - hot tank 800 l. - cooling tank 2000 l. - hot mixing time from 6 to 10 min. - cooling time from 10 to 15 minutes. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product such as PVC and wood dust or MDF dust can be combined.

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V. ... more information

Press mould Cap for injections 40 mm Turkey widely used in the medical industry. ... more information

Corner cleaning machine - ELUMATEC Very good Year: 2003 ... more information

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003 ... more information

Spindle copy router - ELUMATEC Very good Year: 2003 ... more information