Manufacturer:
(Category: 308)
Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition. ... more information
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition. ... more information
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition. ... more information
QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition. ... more information
Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm. ... more information
Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm
Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.
Qty 1 x Guix 75 internal mixer, Chamber volume 75L, Tangential rotors, Hydraulic drop door with linear actuator and latch, Motorised lubrication and process oil system, With 250kw A.C. 1470rpm, 400V motor and controls. Rotor speed approx 60rpm. All mounted on a heavy duty steel base. Complete and in very good condition.Â
1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...
Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC
1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.
1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.
1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.
Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...
Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg
Ultrasonic welder converter and holderTELSONICUltrasonicsSE-26/20-36kHz VKmax 500 Wmax. converter voltage: 1500 Vwith holder and pneumatic loweringstroke: 40 mmsuitable for S840 and S842 used, tested !Dimensions: 470 x 80 x 115 mm ... more information
air pressure:8 bar Air consumption:NI 18 l/min.weight:110 kgdimensions of the machine ca.:700 x 300 x 1000 mm ... more information