lathes used for sale

Condition: very good mechanical parts Technical details: Turning diameter 3200 mm Table diameter 3200 mm Turning height 2000 mm Max workpiece weight 50 t Table speeds 0.66-62.1 rpm Crossrail vertical movement 1870 mm Main motor power 125 kW Machine dimensions 5100 x 9200 x 7200 mm Machine weight 90.4 t

turning diameter over bed: 490 mmturning diameter over slide rest: 280 mmturning length: 2000 mmcentre height: 245 mmcentre distance: 2000 mmspindle bore: 62 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,5 tdimensions of machine L x W x H: 3,78 x 1,17 x 1,42 mAccessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3.150 mmturning diameter over slide rest: 2.650 mmturning length: 15.000 mmControl: CNC Siemens 840D workpiece weight: 160 tnumber of spindle speeds: 4 Bereiche – von 0,25 bis Pictures from location. Machine is now in warehouse in dismantled condition. See last picture.8 steadiesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coolant equipment, a lot of accessories  ... more information

Condition: very good mechanical part Technical details : Turning diameter 3200mm Table diameter 3200mm Turning height 2000mm Max workpiece weight 50 t Table speeds 0.66-62.1 rpm Vertical crossrail movement 1870 mm Main motor power 125 kW Machine dimensions 5100 x 9200 x 7200 mm Machine weight 90.4 t

turning diameter over bed: 720 mmturning diameter over slide rest: 500 mmturning length: 1000 mmspindle turning speed range: 7.1 - 1800 U/minfeeds - fine adjustment: 6 - 6,28 mm/Ufeeds crossrail-slide horizontal: 0,005 - 6,28 mm/Uspindle drive: 15 kWcentre height: 360 mmspindle bore: 82 mmtotal power requirement: 28 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 m3-jaw chuck: 315 mmQick Toolholders: Multifix GR. 8 Digital Read Out: Acu-Rite Face plate: 600 mmmotorized top slide: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1320 mmturning diameter over slide rest: 820 mmturning length: 4400 mmControl: faceplate: 1200 mmbed width: 800 mmspindle passage: 167 mmsteady: 480 control: IMS total power requirement: 76 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 1070 mmturning length: 7000 mmturning speeds: 2,24-450 U/minControl: faceplate: 1400 mmspindle passage: 160 mmsteady: 400 mmdrive capacity - workpiece: 63 kWTail stock:: elektr. diameter of quill: 200 mmbed width: 950 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Center height: 220 mm Center width: 1000 mm Spindle bore: 55 mm Bed width: 430 mm Speeds, 2 stages: 18 - 1800 1/min Tailstock mount: MK 4 Quill stroke: 190 mm Feed rate: 0.30 - 3.26 mm/rev Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm Equipment: - Quick-change holder System Multifix - Bed stop - Coolant device -Mudguard - Turning chuck protection with restart protection

Machine is fully functional and has its own cooling and a Heidenhain digital has a three-jaw chuck and a clamping width of 450mm is 3 meters long and 3 tons heavy you can clamp through the jaw chuck so longer workpieces are no problem it has a rotary heart and various cornel and jaws to exchange machine is in a very good condition and machine manuals are included

: Ravensburg A2,2 circulation diameter max.: 2.200 mmdiameter of quill: 90 mmweight of the machine ca.: 1,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

turning length: 1000 mmturning diameter over bed: 430 mmturning diameter over slide rest: 235 mmspindle turning speed range: 11.2 - 2000 U/minspindle bore: 56,0 mmmorse taper: 4 MKquill stroke: 135 mmbed width: 333 mmspindle taper: DIN 55022 Gr. 6total power requirement: 7,75 kWweight of the machine ca.: 1950 kg.dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled ()Furnishing:- robust master/feed spindle machine- FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6)- HEIDENHAIN digital display- MULTIFIX steel holder, with insert- Movable tailstock- chuck key- chip rear wall- sliding bed stop- Protection for bed rails- live center- Coolant device, with drip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Workpiece weight 8 t Crossbar adjustment 800 mm Chisel travel 700 mm Swivel angle max. 45 +/- degrees Special equipment: wet turning device, Fine-tuning chisel device, incl. accessories Machine weight approx. 13.5 t Space requirement approx. 3.4 x 5.8 x 4.5 m  ... more information

turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system

Offer 24226 Specifications: - Largest circulation – Ø over bed 560 mm - via flat slide 380 mm - Center height 280 mm - Center width 2000 mm - Spindle bore 65 mm - Pick-up cone of the tailstock quill MK 6 - 20 spindle speeds 12 - 1200 rpm - Feeds - longitudinal -plan - Drive 400 V / 12 kW - with: - 3 axis digital display - Jaw chuck, SWS steel holder, tailstock - Coolant device, - Space requirement approx. W 4000 x H 1800 x D 1400 mm - Weight approx. 3000 kg

Producent: KRAMATORSK Model: 1A670 Condition: Good, machine is complete, Year of manufacture: 1975 Technical details Swing over bed: 2000 mm Swing over carriage: 1600 mm Max. distance between centres: 10000 mm Width of bed: 2240 mm Centres height: 1060 mm Max. workpiece weight: 63 000 kg Spindle hole: 80 mm Spindle cone ( 1:7): 120 mm Tailstock taper (1:7): 120 mm Spindle speeds range( stepless): 1-125 rpm Main motor power: 100 kW Installed power: 112,5 kW

turning diameter over bed: 1000 mmturning diameter over slide rest: 710 mmturning length: 7000 mmmax. workpiece weight between centres: 10000 kgspindle turning speed range: 1,8-400 U/mintailstock quill taper metric: 80/1:10 tailstock - quill dia: 170 mmtailstock - travel of quill: 200 mmTailstock quill travel speed: 2150 mm/minmain drive motor: 37 kWlongitudinal feeds:: 0,125-48 mm/U face feeds: 0,4 der Längsvorschübe weight of the machine ca.: 17 tdimensions of the machine ca.: 11x1,9x2 mmachine was mechanically and electrically overhauled in the last years.- taper turning function- 3 lynettes- misc. center points for tailstock- set of change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 6 spindles - Max. bar clearance: 63.0 mm - Rod guide and stand including many accessories (see photos)  ... more information

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer  ... more information

Typ/ type: TUD- 40 Hersteller/ make: WAFUM Year of make: 1975 Swing over bed/ slide: 400 /225 mm Drehlänge / turning length: 500 mm Working spindle hole in spindle: 56 mm Main spindle cone: Morse 6 Tailstock quill cone: Morse 5 Diameter of the tailstock quill/ diam. Sleeve: 90 mm Adjustment sleeve: 180 mm 21 working spindle speeds/ 21 speeds: 18..1800 rpm Longitudinal feeds / long. Feed: 0.08 .. 3.26 mm / rev Plan feeds /cross feeds: 0.04.. 1.63 mm / rev Thread pitches / threads: metr. Thread: 1..88 mm Inch thread: 1..88 gg./ 1" Module thread: 0.25..3.5 module Diametrical pitch thread: 112..8 pitch Rapid travel of support: 4.2 m / min Connected power: 7.35 kW Weight of the machine: approx. 2.8 t