other machines for plastic used for sale

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... more information

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... more information

Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg. ... more information

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A. Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C. Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg. ... more information

6 identical timing belt conveyors MK Technology Group are available. Total load: up to 250kg, speed: up to 60m/min. On-site inspection is possible. ... more information

Figure 4 3D printer from 3D Systems in very good condition. Fully functional., Equipment:, - 2x building platform, - Residual materials, technology: DLP Digital Light Processing, Construction volume: 124.8x70.2x196mm, Dimensions machine unpacked: 426 x 489 x 971mm, Weight machine unpacked: 35 KG, Weight machine packed: approx. 60KG, Dimensions machine packed: 740 x 690 x 1300mm, resolution: 1920 x 1080 pixel, building material: TOUGH-GRY 10 TOUGH-GRY 15 TOUGH-BLK 20 FLEX-BLK 10 FLEX-BLK 20 PRO-BLK 10 Rigid White Rigid Gray Rigid 140C Black Tough 65C Black Tough 60C White High Temp 150C Black HI TEMP 300-AMB MED-AMB 10 MED-WHT 10 RUBBER-65A BLK EGGSHELL-AMB 10 RUBBER-BLK 10 ELAST-BLK 10, support material: Not required, Power connection: 100-240 VAC, 50/60 Hz, single phase, 4.0 A, Data transfer/network: 10/100/1000 Ethernet interface, transport: carrier, software: 3DPrint, License required ...

2017 ProJet 2500Plus, defective as a spare part carrier or for repair. Machine reports error with support feed. According to 3D Systems, repair costs can be between €1,000 and up to €7,000. Device was last serviced in 2023 and has printed components in good quality., Possibly defective components:, - DMC Board, - Carriage Board, - PDAC-Board, - Umbilical track, [Buy 2017 3D Systems ProJet 2500Plus now](https://www.layerbylayer-shop/p/2017-3d-systems-projet-2500plus), Technology: MultiJet Printing

A ProJet 2500Plus from 2017 is being sold. The device is in perfect condition, test printing is possible (compensation for expenses, which will be charged upon purchase)., Accessories: EasyClean system from 3D Systems, second construction platform, Technology: MultiJet Printing ... more information

For sale here is a 3D printer from the BigRep brand Studio G1. This machine is a showroom unit and will be serviced by a specialist dealer before delivery. The software comes from the manufacturer BigRep, which is closely based on the well-known Cura., operating hours: few, Installation: 2017, Installation space in mm (x/y/z): 1000x500x500, software: BigRep Blade, network connection: USB / Network, support material: Compatible with all popular 3rd party filaments , Layer thickness: 0.1mm 0.4mm, number of nozzles: 2, extruder units: Fiber-Ready Dual Extruder, Print bed temperature in °Celsius: Max. 100°C, Weight in kg: about 600KG, Power supply: 208V - 240V, 16A, 50/60Hz, security certification: CE approval, building material: BigRep ASA, BigRep ABS, BigRep BVOH, BigRep HI-TEMP, BigRep HI-TEMP CF, BigRep PA6/66, BigRep PETG, BigRep PLA, BigRep PLX, BigRep PRO HT, BigRep TPU 98A Comp ...

Used dyeing machine DM60 from Dyemansion for additive manufacturing for sale. Machine is in very good condition., color range: Unlimited, Color cartridge options: S,M,L,XL, DM Black L-R, throughput time in minutes: 150, Operating temperature: Up to 115°C | Up to 240°F, capacity per pass: E.g. up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5 Stratasys H350 build space, process chamber: 80l | 21.1gal, Maximum part size (Ø x H): 390mm x 360mm | 15.3inch x 14.2inch, Dimensions in mm (w x h x d): 950mm x 600mm x 945mm, Compatible Technologies: SLS, SAF, MJF & HSS On request: SLA & DLP & CDLP / CLIP, penetration depth: Depending on the material (approx. 0.2mm for EOS PA 2200)

EnvisonTEC DLP 3D printer for sale. Accesories: - Software CD Perfactory Software Suite & Magics EnvisionTEC - UV light curing station model ACC-03-1001 - Laser glasses - Various consumables, Installation space in mm (x/y/z): 300x200x275, Layer thickness: 50-100, Weight in kg: about 270 ... more information

Used HP4200 MultiJetFusion 3D printer in good condition for sale, Equipment:, 1 piece Processing stations, 2 pcs. Build Units ... more information

Very well maintained Agilista-3200W 3D printer from 2017 for sale. Accessories: Modeling Studio software, container for removing support material, 2x waste containers. Device is ready for use., Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, equipment: Software, cable, heat bath, file formats: STL, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Installation: 2015, Accessories post processing: On demand, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (si ...

Well-maintained Mark Two 3D printer in good condition for sale. Running time: 4015 hours or 556 prints., Equipment:, - some remaining materials can be purchased additionally (expiration date expires), - 1 piece dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diam ...

UnionTech RSPro 450 used for sale. Good condition, laser unit renewed in 2023., equipment, - UV Curing Unit, - Dismantling and installation by certified specialist dealer included, Construction volume: 450 x 450 x 400mm, Layer thickness: 0.05mm (Min); 0.25mm (Max), laser: Solid-state laser: frequency tripled Nd: YVO₄, scanner: RSCON by UnionTech, wavelength: 354.7nm, Beam Diameter/Beam Size: Nominal 0.08-0.12mm, Data transfer/network: Ethernet, IEEE 802.3 using TCP/IP and NFS, Power connection: 200 - 240 VAC 50/60 Hz, single phase, 20 amps, Machine dimensions in mm (w x d x h): 1350 x 1380 x 2282mm, Weight machine unpacked: 1545 KG, file formats: STL, SLC, Ambient temperature during operation: 22-26 °C, max. 1°C change / h, Ambient humidity during operation: < 40% non-condensing

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg

Automatic door handle for making holes for the handle in the window. Automatischer Türöffner zum Bohren von Löchern für Fenstergriffe.  ... more information

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use ... more information

This TRUMPF TruPrint 3000 3D Printer was manufactured in 2017. It features a laser capacity of 500W and a work area of 400x300mm. The machine can handle a variety of materials including stainless steel, tool steel, and titanium. With dimensions of 3385 x 1750 x 2070 mm and a weight of 4300 kg, its designed for robust performance. For more information about this 3D Printer, please reach out to us.