boring mills and machining centers used for sale

Description: With 3 drilling spindles, stroke approx. 120 mm, table size approx. 400 x 400 mm, throat depth approx. 295 mm, with coolant unitweight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 2,000 mm ... more information

x-travel:630 mmy-travel:500 mmz-travel:500 mmtable-size:800 x 500 mmspindle taper ISO:40 turning speed range:0 - 10.000 U/minfeeds longditudinal/cross/vertical:1 - 30000 mm/minrapid motion -longitudinal/cross/vertical:30 m/minno. of tools in magazin:24 workpiece diameter at full load:80 mmwotkpiece diameter with 2 vacant positions:140 mmworkpiece length:300 mmweight of tools max.:7 kgtable load:500 kgspindle drive:9 / 11 kWcontrol:SINUMERIK 810D total power requirement:30 kVAweight of the machine ca.:4,2 tvertical machining center,el. handwheel,ShopMill,direct measuring system,3D-touchprobe RENISHAW MP 10 ,laser,internal coolant supply,mode 4,airblast,chipconveyor,approx. 42.500 hours on hour meter

Description: Drill diameter max. 12 mm, stroke approx. 80 mm, table surface approx. 200 x 220 mm, throat depth approx. 200 mm, speed range 630 to 5000 rpmApprox. Onsite Dimension. (l x w x h): 700 x 500 x 700 mm, weight approx.: 50 kg ... more information

Description: Stroke approx. 80 mm, drilling diameter max. 20 mm, table surface approx. 280 x 300 mm, projection approx. 175 mm, 12 speed levels between 210 and 2580 rpmApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,050 mm, weight approx.: 60 kg ... more information

Description: Serial number and Control unit Serial number: 97-2027.4698 Control system: HEIDENHAIN | ARTIS Working area and Travel distances Table size: 1,800 x 1,200 mm Maximum table load: 15,000 kg Axis travel X-axis: 2,000 mm Axis travel Y-axis: 1,000 mm Axis travel Z-axis: 1,500 mm Axis travel Z1-axis: 500 mm Axis travel B-axis: 0 - 15 ° C-axis axis travel: 360 ° Feed speeds Feed rates via brushless AC servo motor Work feed: 0 - 2,000 mm/min Rapid traverse (automatic | manual mode): 15 m/min | 8 m/min Set-up mode: 0 - 2,000 mm/min Spindle Tool clamping by disc spring assembly Hydraulic release Tool holder: SK 40 Please have a look at the PDF data and the machine video.spindle taper: SK 40, weight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 7,000 x 7,000 x 3,000 mm

Description: TABLE DIMENSIONS: 75 , DEPTH: 20 INCLUDING FIXING STRAP , COURSE FROM 0 TO 13 CM INCLINABLE HEAD  , Motor voltage: 400V Motor power: 1.5Kw Spindle taper: CM4 Maximum drilling diameter: 40mm Milling face diameter: 76mm Tapping capacity: M16 Spindle stroke: 130mm Spindle speed: 75-3200 Rpm X axis: 370 Y-axis: 180 Z-axis: 610  ,weight approx.: 365 kg, Approx. Onsite Dimension. (l x w x h): 760 x 830 x 1,885 mm

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

Description: 400x400 pallet Tool attachment BT40 12000 rpm spindle 40-tool magazine Filtration unit and swarf conveyor (cast iron and aluminum). ,  , Electrical and hydraulic problem on pallet changer device. , Collection possible from 04/11/2024 to 08/11/2024weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 3,000 x 3,300 mm

x-travel:1.500 mmy-travel:700 mmz-travel:610 mmcontrol:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mmtool taper:SK 40 numbers of positions in the tool changer:48 fachspindle turning speed - stepless:15000 1/minrapid traverse:36 m/mintable load capacity:700 kgspindle drive:25 kWtotal power requirement:30 kVAweight of the machine ca.:9,1 tdimensions of the machine ca.:3,7 x 2,65 x 2,9 mvertical machining center,20 bar internal coolant supply with paper filter,3D-touchprobe,chipconveyor,el. handwheelmeter readings:approx. 43.600 h "machine on", approx. 20.000 h "spindle on",

Description: 230 V 50 Hz , Drill chuck 3-16mm Speed 510-2430 l/min Never servedweight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm ... more information

Description: HSK 100 , TOOLS STORE: 80 DOUBLE SPINDLE 8000 TURNS/MINUTE CHIP CONVEYOR: ALUMINIUM + CAST IRON CNC CONTROL: SIEMENS SINUMERIC  , Strokes: , X: 600mm Y: 600mm Z: 500mm  , 80-tool magazine Maximum tool diameter: 100mm Maximum tool length: 420mm Max. tool weight 20 kg Tool change principle: Automatic pick-up Average chip-to-chip time: approx. 4.9 sec  , Global connected load approx. 128kVA  , Operating pressure: 5.5 bars min. Connection pressure: 12 bars max. , Collection possible from 04/11/2024 to 08/11/2024weight approx.: 27,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 6,200 x 3,300 mm

Description: HSK 100 MAGASIN  ,80 TOOLS DOUBLE SPINDLE 10000 TURNS/MINUTE CUTTING DEVICE : ALUMINIUM + CAST IRON FANUC SERIES 16i-MB  , Strokes: X: 600mm Y: 600mm Z: 500mm  , Pins: Pin arrangement: horizontal, side-by-side Spindle spacing: 600mm Rotation speed range: 20-10000 1/min Standard power: 2 x 38 kW (S6/40% ED) at 1000 1/min Torque moment: 2 x 363 Nm (S6/40% ED) Acceleration time at 10000 1/min: 2.5 s , Braking time: 2.5 s Main spindle diameter: 100mm  , Tools: , Maximum tool diameter: 100mm Max. tool length: 420mm Max. tool weight: 20kg Tool change principle: Automatic pickup Average chip-to-chip time: approx. 4.9 sec Collection possible from 04/11/2024 to 08/11/2024weight approx.: 27,000 kg, Approx. Onsite Dimension. (l x w x h): 90,000 x 6,200 x 3,300 mm

x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine  ...

Description: Sourced from an automotive manufacturer due to production changes Serial Number: 109303 Control: Siemens Sinumerik 840 DSL (composed of 15 NC and 4 spindles) ,  ,Machine-specific plain text messages on screen in German language This  ,machine centre is composed as follows: , 2 Centric clamping divices Actuation: , Hydraulic Swivel table: 180º Hydraulic pressure:  ,approx max 100 bar Station 1 (front) , Spindle units: 2 SEMA spindle units type SE55 - HSK 50 for deburring Spindle Bearing inside diameter: 55 mm Sealing with barrier air and labyrinth Tool holder: HSK50 Drive power: 1,5 kW at 3000 rpm Tool cooling Dry machining Drive direct via coupling Manual tool change 2 pcs. 4 spindle head for thread forming 4xM10 with IK and ABS tool holder Drive power AC servo motor, 11.0 kW Spindle speed  ,variable: ,max 3500 rpm Coolant interna ...

Description: Control and Machine Number Control: SIEMENS Sinumerik 840 D Machine no.: 14351 Travels and Axes Travel X-axis: 1450 mm Travel Y-axis: 1100 mm Travel Z-axis: 1300 mm B - axis: NC rotary table Pallet dimensions & Pallet changer Number of pallet places: 2 , Pallet dimensions: 1000 x 800 mm Feeds & Spindle Rapid feed X,Y,Z: 60 m/min Working feed: 1- 60000 mm/min Feed force max. X|Y|Z : 20|18|20 kN Spindle speed: 20 - 6000 rpm Tools & Tool changer Tool holder: SK 50 Chip to chip time: approx. 5 sec. Tool change places: 180 General data Coolant system Chip conveyor Please have a look at the technical data in PDF format.z-motion: 1,300 mm, change time of pallets: 5 sec, x-motion: 1,450 mm, y-motion: 1,100 mm, control: SIEMENS Sinumerik 840 D, numbers of pallets: 2, taper: SK 50, toolchanger positions: 180, turning speed range: 20 - 6000 rpm, rapid motion: 60 m/min ...

x-travel:850 mmy-travel:700 mmz-travel:500 mmturning speeds:10.000 1/mintool taper:SK 40 control:iTNC 530 HEIDENHAIN tool change unit:38 round table:2 x D 280 mmspindle:32 / 17 kWspindle:159 / 107 Nmrapid traverse:45 m/mintotal power requirement:43 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:2,4 x 3,2 x 2,9 m5-axis machining center,NC-round-swivelling configuration dual round tables dia. 280 mm 3 D touchprobe RENISHAW,chip conveyor,tool-changing time (chip to chip) approx. 4,5 s,internal coolant supply thru spindle (40 bar / 600 liter),el. thermal compensation,airblast through spindle,el. handwheel,approx. 62.500 hours "machine on", approx. 19.900 hours "spindle on"

Description: The DIXI DHP 80 High Precision Horizontal Machining Centre with four axes was used exclusively for the finest machining processes and has never produced rougher chips. A fresh geometric adjustment was carried out in November 2023. Control system Control system: SIEMENS Sinumerik 840D Linear axes Traverse path X/Y/Z axis: 1,200/1,100/1,100 mm , Y distance pallet to spindle (min. - max.): 40 - 1,140 mm Z distance from pallet centre to spindle (min. - max.): 230 - 1,320 mm Work feed: 0 - 10,000 mm/min Rapid traverse: 40,000 mm/min B-axis Table indexing angle min.: 0.0001° Feed rate: 0-10 rpm Max. torque (continuous, nominal torque): 1,040 - 1,828 Nm Spindle with internal coolant supply Nominal spindle motor power: 39 kW Spindle speed max.: 12,000 rpm Spindle holder: HSK A-100 Coolant supply with 70 bar and 20 l/min Automatic FASTEMS pallet changer Pallet storag ...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours

Description: Basic Machine Universal machining centre DMU 60eVo New DMG MORI Design traverse path X/Y/Z 600/500/500 mm / X/Y/Z 23.6/19.6/19.6 in motorspindle speedMASTER® SK 40/BBT speed range 20 - 18.000 min-1 SK40 speed range 18.000 - 20.000 min-1 SK40-BIG PLUS® 35 kW (40% ED), 25 kW (100% ED) 46.9 hp (40% DC), 33.5 hp (100% DC) tool taper SK40 (DIN ISO 7388-1-A, AD) for Pull-Studs DIN ISO 7388-3-A, AD NC swivel rotary table chain type tool changer with 30 positions and double gripper active cooling direct measuring system full cabin Swarf conveyor (scraper type), spray gun MPC (Machine Protection Control) 3D-Control, ERGOline® control Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Control CELOS with Siemens 840D sl Operate includes 21,5 ERGOline® Cont ...

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:30.000 1/mintool taper:HSK 50 control:HEIDENHAIN iTNC 530 spindle:20 /15 kWtool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,mode 4,oilmist suction,internal coolant supply,approx. 152.000 hours "machine on", approx. 60.400 hours "spindle on" in total