lathes used for sale

Description: Spindle bore: Ø54 mm Nose type: D1 6 in Camlock Morse taper: No. 4 Morse No. Spindle speeds: 16 ANILAM WIZARD 411 digital readoutDrehlänge: 1,250 mm, turning diameter over bed: 390 mm, turning diameter over slide: 240 mm, turning speed range: 25 - 2000 rpm, total power requirement: 5.5 kW, weight approx.: 2450 Approx. Onsite kg, Approx. Onsite Dimension. (l x w x h): 2,450 x 1,000 x 1,600 mm

turning diameter:620 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:540 mmbed width:350 mmspindle taper:As-8 spindle speeds:0-2500 1/min.spindle bore:105/155 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2300/2515/3010/3700 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

Description: MAXIMUM SWING 660 mm - MAXIMUM MACHINING DIAMETER 350 mm - MAXIMUM bar WORK CAPACITY 65 mm - MAXIMUM MACHINING LENGTH 511 mm - CHUCK SIZE 200 mm - MOTOR OUTPUT (30 MINUTES/CONT. ) 15/11 kw - CROMAR S334901 a SWARF CONVEYOR - TOOL PRESETTER ARM - TAILSTOCKx-motion: 190 mm, z-motion: 560 mm, control: Mazatrol, toolchanger positions: 12, weight approx.: 4,410 kg, Approx. Onsite Dimension. (l x w x h): 2,750 x 1,700 x 1,700 mm

turning diameter:570 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:490 mmbed width:350 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:80 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2250/2475/2970/3640 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 285 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:450 mmturning length:1000/1500 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:260 mmbed width:300 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000/1500 mmrapid traverse x/z:15/12 m/minpower requirement:9 kWweight of the machine ca.:1400/1680 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 225 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:750/1000 mmcontrol:Fanuc/ Fagor/ Siemens max. swing over slide:300 mmbed width:250 mmspindle taper:As-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtransmission ratio:1 tailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750/1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200/1490 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mmswing diameter:1250|1600|2000|2300 mmturning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mmtable speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/mintransmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 tmax. torque on the faceplate:20|25|25|25 KNrapid feed of tool post:8000|3000|3000|3000 mm/minfeed speeds:0.1 - 500 mm/minMax. cutting force of tool head :18|25|30|30 KNmTravel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mmTravel of ram (horiz.):850|1000|1115|1400 mmCross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mmpower maindrive:22/30|30/37|37/45|37/45 kWweight of the machine ca.:9|12,5|18,5|20,5 tMachine size (LxWxH):2360x2277x3403|2660x2660x3698|3 ...

turning diameter over bed:402 mmturning diameter over slide rest:245 mmturning length:750/1000 mmcentre height:200 mmbed width:250 mmmax. workpiece weight between centres:280/300 kg:135 kgspindle bore:42 mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minlongitudinal feed:0.05-0.752 mm/Ucross feed:0.025-0.376 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:58 mmsleeve conus:4 MKquill stroke:180 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:4 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix

turning diameter over bed:502 mmturning diameter over slide rest:310 mmturning length:1000/1500 mmcentre height:250 mmbed width:300 mmmax. workpiece weight between centres:450/750 kg:225 kgspindle bore:58 (opt. 105) mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minspindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/Ucross feed:0,022-0,296 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:69 mmsleeve conus:4 MKquill stroke:200 mmpower requirement:5,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 250 SeriesMore information can be found in the appendix

turning diameter over bed:652 mmturning diameter over slide rest:450 mmturning length:1000/1500/2000/3000 mmcentre height:325 mmbed width:350 mmmax. workpiece weight between centres:1125/1690/2025/2815 kg:360 kgspindle bore:85 (opt. 105/155) mmspindle turning speed range:30-1500 (3 Getriebestufen) (opt. 80-1250/50-800) U/minlongitudinal feed:0,05-1,5 mm/Ucross feed:0,025-0,752 mm/Umetrical thread cutting:0.5 - 15 mm/Uthreading WHITWORTH:60-2 TPIrange of module thread:0,25-7,5 mm:120-4 mm/min.diameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-180 (180-400 opt.) mmwith live steady:Ø 10-140 mmpower requirement:7,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 325 SeriesMore information can be found in the appendix

turning diameter:652 mmturning length:1000/1500/2000/3000 mmcontrol:Siemens 808D turning diameter over slide rest:595 mmcentre height:325 mmbed width:350 mm:360 kgspindle taper:5 MKspindle nose:A2-8 spindle bore:80/105/155 mmspindle turning speed range:30-1700 (3) U/minlongitudinal feed:0-5000 mm/Ucross feed:0-5000 mm/Udiameter of quill:95 mmsleeve conus:5 MKquill stroke:220 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:7,5 kW:8605 DINWeight approx.:1,9/2,2/2,6/3,2 tCNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix

:SS-27 | SS-31 | SS-35 turning diameter:700|790|890 mmturning length:700/1200/1700/2200/3200/4200/5200 mmcontrol:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mmspindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/minspeed steps work spindle:4-stufig (automatisch schaltend) cross feed:0,001~250 mm/minfeed in z-axis:0,001~400 mm/minrapid travel - longitudinal/face:8/10 m/mindia of ball screw:45 mm in X-Achse / 60 mm in Z-Achse tool turret:10- oder 12-fach tool taper:VDI 40/50 oder Schaftaufnahme tool holder -shaft diameter:32x32 mmdiameter tailstock quill:160 mm:200 mmtailstock quill taper MT:5 spindle drive:30/37 (37/45 opt.) kWservo motor X-axis:3,8 kwservo motor Z-axis:3,8 kwweight of the machine ca.:11t für Spitzenweite 700mm (weitere 500mm: 1,5t) tCNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hyd ...

:SA-35 | SA-40 | SA-45 turning diameter:890|1020|1145 mmturning length:700/1200/1700/2200/3200/4200/5200 mmcontrol:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mmspindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/minrapid travel - longitudinal/face:8/10 m/mincross feed:0,001~250 mm/min.feed in z-axis:0,001~400 mm/mindia of ball screw:50 mm in X-Achse / 80 mm in Z-Achse tool turret:10-/12-fach tool taper:VDI 40/50 oder Schaft tool holder -shaft diameter:32x32 mmdiameter tailstock quill:235 mm:200 mmtailstock quill taper MT:6 spindle drive:37/45 (50/60 opt.) kWservo motor X-axis:4,5 (6 opt.) servo motor Z-axis:4,5 (6 opt.) kwweight of the machine ca.:16,5t für Spitzenweite 700mm (weitere 500mm: 2,2t) tCNC controller:Siemens/Fanuc/Fagor steady rests:manuell und hydraulisch Solid slant bed esures the lathe´s accur ...

turning diameter:33 mmturning length:330 mmcontrol: 840 total power requirement:20 kWweight of the machine ca.:6 tdimensions of the machine ca.:3850,2000,2100 m17 axes3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axesBarfeederMachine On-time 58,133 hours

:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mmturning diameter over slide rest:1000|1200|1500|1600 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmbed width:1100 mmworkpiece weight:12 (15 opt.) tspindle bore:130 mmspindle taper:140 spindle speed (3 steps):2,5-250 U/minmetrical thread cutting:1~120 (44 Arten) mmlongitudinal feeds:0.1 ~ 12 (56 Arten) mm/Uface feeds:0.05 ~ 6 (56 Arten) mm/Urapid traverse longitudinal:3400 mm/minrapid traverse cross:1700 mm/mincross way of carriage:760 mmmovement of the upper support:300 mmtool size:45 x 45 mmtailstock quill diameter:260 mmstroke:300 mmtailstock-quill conus:80 metrischspindle motor:30 (50 opt.) kWtool holder:4-fach steady diameter:500-800 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lat ...

:SDM 1000E | SDM 1250E | SDM 1400E turning diameter over bed:1000|1250|1400 mmturning diameter over slide rest:650|900|1100 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmmax. workpiece weight between centers:8000 kgbed width:755 mmspindle nose:A2-15 spindle bore:130 mmspindle speed (3 steps):3,15-315 U/minmetrical thread cutting:1~120 (56 Arten) mmcross way of carriage:520|680|720 mmmovement of the upper support:300|300|400 mmtool size:45 x 45 mmtailstock quill diameter:180 mmstroke:300 mmtailstock-quill conus:6 MKweight of the machine ca.:bei 3m: 12 t (jeder weitere Meter ca. 800kg) Machine size (LxWxH):bei 3m: 6100x1900x2000 mmtool holder:4-fach follower rest:50-220 mm4 jaw chuck:1000 mmsteady diameter:50-470 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lathe

turning diameter:670 mmturning length:3000 mmcontrol:840 z-axis:3150/3000 mmy-axis:-125/+175 mmx-axis:700/260 X+ mmc-axis:0,001 °main gear-box motor:60/40 kWspindle turning speed range:2600/3300 U/minspindle diameter in front bearing:160 mmSpindle bore:115 mmlower slide:2 x 12, VDI 40 mmupper slide:25 kWno. of tools in the magazine:90 Stückworkpiece length:900 mmtool taper:HSK 100 / VDI 40 rapid traverse::15/20 m/mintotal power requirement:140 kWweight of the machine ca.:35 tdimensions of the machine ca.:13 x 4,5 x 3,6 mCNC TURNMILL center with opposed spindles and 2 saddles, used for Alu operation only- SIEMENS 840 C control for 8 axis- Left/Right spindle with C-axis, KNCS 400 mm power chuck- Lower saddle with 2 x 12-fold revoving heads- Turning.- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, B and Y axis- Coolant device with 80 bar and ro ...

turning diameter over bed:350 mmturning diameter over slide rest:240 mmturning length:800 mmSpindle RPM:40 - 2000 in 8 Stufen 1/mintotal power requirement:3 kWSpindle bore:26 mmtailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 mweight of the machine ca.:1,9 tVery well maintened center lathe with accessories- 3-jaw, 4-jaw chuck- tailstock with center- 1 boring head- RAPID quick tool change device with 3 holder- saddle mounted steady rest- collant device- set of collets appr. 75% size B 32

faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor

faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders