lathes used for sale

Heid 270-57-1500 - Universal lathe - Distance between centers: 1500 mm - Swing Ø: 540 mm - Spindle bore: 57 mm - Dimensions WxHxD: 3420 x 1400 x 1350 mm  ... more information

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg

- Siemens Sinumerik control - Chip conveyors - Coolant system - Built in 2002 Technical data - Circulation diameter: 235 mm Sledge path: - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - • in the front bearing: 90 mm - Spindle head with short cone DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated into the spindle box - Rated power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Rated speed: 1400 rpm - Maximum speed: 6500 rpm - Travel speed Z-axis: max. 30 m/min - Travel speed X-axis: max. 60 m/min

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

- Siemens Sinumerik 802S CNC control - 3-jaw chuck with interchangeable jaws Ø 120 mm - 4-fold tool changer - Coolant device - Full enclosure - Year of construction 2013 Specification - Center width: 700 mm - Center height: 140 mm - Circumferential Ø above bed: 266 mm - Spindle bore: 26 mm - Spindle cone: MK4 - Bed width: 180 mm - Spindle speed: 30 - 4000 rpm - Speed levels: 30-300 / 140-1400 / 300-3000 / 400-4000 rpm - X-axis travel: 180 mm - Z-axis travel: 465 mm - Feed speed X-axis: 3000 mm/min - Feed speed Z-axis: 2500 mm/min - Tool slots in the tool changer: 4 - Tool changer pick-up height: max. 12 mm - Tailstock mount: MK2 - Tailstock quill stroke: 85 mm - Motor power: 1.5 kW - Coolant pump motor power: 40 W - Coolant tank capacity: 12 l - Machine dimensions WxHxD: 1685 x 1885 x 805 mm - Weight: approx. 420 kg

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... more information

Control Mazatrol T Plus Max. oscillating circuit diameter 531 mm Standard machining diameter 276 mm Max. machining diameter 300 mm Max. diameter for bar work 64 mm Distance between spindle nose and turret plane 125 mm – 745 mm Spindle speed range 35 – 4,000 rpm Drive power of the main spindle (30 minutes power) 18.5 kW Drive power of the auxiliary spindle (10 minutes power) 7.5 kW Tool turret with 12 places for driven tools Drive power of the driven tools 3.7 kW Machine weight / power consumption 5.45 t / 53.7 kVA Accessories: automatic parts catcher, transport conveyor, reinforced cooling system, Chip conveyor, Sameca bar feeder MultiSam 6.80

With Fagor control  ... more information

Machine Details Stock-No. 1105-03950 Type of machine CNC Lathe Make DAEWOO DOOSAN Type PUMA 400 M Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KOREA Delivery time to be agreed Freight basis ex Site Technical details turning diameter 700 mm turning length 1043 mm control FANUC 21 IT turning diameter over bed 550 mm bar diameter 116 mm spindle nose A2 11 turning speeds 15~ 2000 rpm drive capacity - spindle motor 26/22 kW Torque 125 Turret (X-Stations) 12 Shank diameter 32 x 32 mm Drill shank diameter 50 mm Travel -X Axis 362 mm Travel -Z AXIS 2505 mm tail stock YES 120 MM slide. of quill 120 mm Quill Stroke 120 mm taper MK 6 rapid traverse X-axis 16 m/min rapid traverse Z-axis 20 m/min total power requirement 50 kW Additional information 700 X 1000 LENG FANUC 21 ITB CHUCK + CHIP CONVOYER

Machine Details Stock number 1105-03878 Machine Type: CNC Lathe - Inclined Bed Machine Make DOOSAN DAEWOO Type PUMA 240 M Year of construction 2008 Control type: CNC Control FANUC 21 TB Storage location FRANCE HAGUENAU Country of origin KORREA Delivery time: Short term by arrangement Freight base ex plant Price Technical details Turning diameter 510 mm Turning length 500 mm Control FANUC 21 TB Circumferential diameter over bed slide 390 mm Spindle speeds - infinitely variable 4500 rpm Spindle bore 65 mm Drive power 15 kW Total power requirement 27 kW Machine weight approx. 4.5 t Dimensions approx. 3.7 x 1.6 x 1.7 m Accessories Driven tool stations 12-speed revolver C - Axis 0.001° Parts collection device with ejector 3-jaw chuck Information Very good condition with c axle and driven tools chip conveyors CNC FANUC 21 IT WITH TAILSTOCK AND LINING

Specifications: Tip height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (24) 16 - 1400 1/min Motor power, 2 stages: 3.5 / 6.0 kW Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Face slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Quill stroke: 150 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck, brand: Röhm ø 200 mm - Emergency stop push button - Quick-change holder System Multifix - Machine light - Coolant device - Guide and pull spindle safety device - Automatic lubrication for support - Moving center punch

Specifications: Tip height:190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 63 - 2000 1/min Feeds: 0.022 - 0.040 mm/rev Tailstock mount: MK 4 Motor power: 4 kW Quill stroke: 150 mm Dimensions (WxDxH), approx.: 2230 x 1080 x 1450 mm Equipment: - 3-jaw lathe chuck, brand: Röhm ø 200 mm - Quick-change holder System Multifix - Bed stop - Emergency stop push button - Machine light - Coolant device - Guide and pull spindle safety device - Spindle protection limit switch-protected

Wheel lathe Rafamet UBB - 112 , one side of the machine isn't working  ... more information

- Rotary Ø: 340 mm - Turning length: 1050 mm - Center height: 170 mm - Speed range: 20 - 2500 rpm - Quill stroke: 160 mm - Lining: Ø 250 mm - 4 -jaws - Spindle passage: 55 mm - Space requirements (W x D x H): approx. 3.1 x 1.1 x 1.5 m - Machine weight: 2,200 kg - Total power: 5.5 kW - Condition: good Accessories 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, bezel

- Turning diameter: 250 mm - Center height: 125 mm - Turning length: 800 mm - Speed range: 3,000 rpm - Total power: 9 kW - Machine weight: 650 kg - Space requirements (W x D x H): 1.4 x 0.8 x 1.85 m - Documentation: yes - Condition: very good Details Lever pliers quick clamp chuck mounted on main spindle via intermediate flange. For compression collets type 173E. Otherwise in standard design according to the present original underlay, GDW lever with push button for spindle start, GDW material stop mounted on the grooving carriage behind the center of rotation, monitoring by Beru switch by means of actuating plungers. Ram diameter 5.0 mm, standby light 3-colour with functions: "locked"-"standby"-"operation", GDW set-up key holder for safe bridging of the stop function, very well maintained machine from a workshop for the disabled, little running Accessories SCM collets:  ...