lathes used for sale

turning diameter: 500 mmturning length: 1250 mmswing diameter over bed slide: 285 mmturning speeds: 11,2 - 2240 U/minspindle bore: 62 mmquill stroke: 190 mmtailstock quill taper MT: 5 total power requirement: 13,0 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 3350 x 1500 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 600 mmturning diameter over bed: 360 mmturning diameter over slide rest: 190 mmbed width: 295 mmnumber of spindle speeds: 45 - 2240 U/min.spindle bore: 33,0 mmtailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/Ufeed: Quer 0,0125-0,5 mm/Utotal power requirement: 5,5 kWweight of the machine ca.: 1900 kgrange L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 eurosFurnishing:- WNW NILES 3-jaw chuck Ø 200 mm- Multifix steel holder size B with inserts- revolving center points- chuck key- Movable tailstock- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/minHead lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition andcan be inspected at any time under power.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:480 mmturning length:1250 mmcontrol:H 645 weight of the machine ca.:8 tdimensions of the machine ca.:5 x 2 x 2 mcentre distance:1580 mmswing over bed:495 mmswing diameter:üb.Querschlitten ca.350 mmworking area:1600 mmcontrol:H645 connected load:50 kW ... more information

CNC lathe Webo Roeperwerk in single parts! Machine coerper no longer available! Only spare parts / parts according to the description below. Type Weboturn 400 Control Siemens System 3T ( CNC 3T) items can be shipped, e.g. - Spindle verstaerker - Achsverstaerker, - CNC control, boards etc. - Monitor No longer available: 1. Main spindle with spindle stick 2. Riding stock 3. Ball roller spindle of the x-axis All photos of the machine, control and the boards can be requested on request. The price of the additional information refers to the main spindle motor with Achsverstaerker as described above. Special price

Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Inv. Num. : 6029 Type: Epa 320 Producer: Hungary Created: 1985 Parameters: Control system: Siemens SINUMERIK 810 T Maximum turning length: 600 mm Maximum turning diameter over bed: 450 mm Maximum turning diameter over support: 250 mm Length: 6000 mm Width: 2500 mm Weight: 4000 kg  ... more information

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

diameter: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350  Grip range 1 mm Ø 300 ÷ Ø 550  Grip range 2 mm Ø 500 ÷ Ø 950  Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150  Spindle rotation speed in 1st rpm range 1 ÷ 24  Spindle rotation speed in 2nd rpm range 20 ÷ 60  Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X� ...

Screw-cutting lathe 1a667, good technical condition, low wear, 100% set. ... more information

turning diameter over bed:1630 mmturning diameter over slide rest:1190 mmturning length:5000 mmcentre height:800 mmswing in gap:2100 mmbed width:1000 mmmax. workpiece weight:12000 (zw. Spitzen) kgnumber of spindle speeds:16 4 - 242 U/minspindle bore:120 mmtailstock quill diameter:180 mmtailstock quill stroke:350 mmWeight approx.:22 ttotal power requirement:ca. 25 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

turning diameter over bed:2300 mmturning diameter over slide rest:1860 mmturning length:5000 mmcentre height:1150 mmswing in gap:- mmlength of gap:- mmfaceplate:1500 mmbed width:1000 mmmax. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kgnumber of spindle speeds:3-300 U/minspindle bore:206 mmtailstock quill diameter:- mmtailstock quill stroke:- mmWeight approx.:26 tspindle drive:50 kWDRO:optional 4 jaw chuck:1500 mmHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... more information

Technische Daten Technical Data Turning Diameter 140/260 mm Centre Distance 400 mm Speed Spindle / Spindle Speed 125-2800 rpm If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately.  ... more information

Controller: Siemens C200 Type of bar feeder: LNS Hydrobar Max power: 11.5 KW Min-max diameter: 1-30mm ... more information

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

turning diameter: 600 mmturning length: 1500 mmcontrol: C200 T turning diameter over slide rest: 425 mmspindle passage: 100 mmTool changer: live tooling: turning speeds: 10-2800 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: tail stock: c-axis: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.