grinding machines used for sale

Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price  ... more information

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price  ... more information

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price  ... more information

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price  ... more information

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price  ... more information

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price ... more information

Double shaft grinder of August jade Maschinenfabrik Frauenfeld Built in 1940 Weight approx. 1100 kg L x W x H: 150 x 80 x 110 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

- Wet double belt grinder for deburring and pre-grinding - 2 abrasive belts with different grain sizes -Water cooling - manual belt centering - Belt speed 7m/sec. - Sanding belts 100/920 mm - 100/915 mm  ... more information

Well-maintained crankshaft grinding machine Lynettes and grinding wheels available Well-maintained crankshaft grinding machine Lynettes and grinding wheels available  ... more information

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arr ...

Deckel S22E Sharpening Machine • MANUFACTURER: DECKEL • MODEL: S-22-E • YEAR OF CONSTRUCTION:2013  ... more information

Blanchard 42 - 84 rotary table grinding machine, Year of manufacture 1962 / overhauled 2005 - Receipts available Table Ø 2133 mm, 2005 new control cabinet and geometry overhauled, 2017 Head remounted, vertical shaft overhauled, grinding head rewound, Grinding head Ø 1066 mm, currently used for grinding circular saw blades, Weight 35,000 KG, Fuse 160 A

For resharpening hobs, skiving tools, cutting rotors, circular knives and other large workpieces and components Control: Siemens 840 DSL X - axis 700 mm Y - axis 410 mm Z - axis 500 mm A - Axis (Dividing Head) 360 ° SK50 (Direct Drive) C - Axis (rotary table) 320 ° (direct drive) Grinding Spindle: HSK80 Tool changer: Double wheel 12 x ø 300 mm Automatic dressing unit Coolant system: Turbo Separator Suction: LTA Extinguishing system: Kraft & Bauer Other accessories possible (e.g. tailstock, X3 axis,) Latest Horizon software possible Individual customer-specific training courses Incl. pre-acceptance at the factory, IBN and final acceptance at the customer's site

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Prior sale reserved - errors possible Internal Reference Number: D-1143-2  ... more information

Prior sale reserved - errors possible Internal Reference Number: D-1143-3  ... more information