gear cutting and hobbing machines used for sale

weight of the machine ca.:4 t ... more information

 ... more information

total power requirement:413 kWInduction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mmX (electromechanical) 200 mmMaximum part diameter 600 mmMaximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30  ... more information

max. wheel diameter:280 mmmax. module:7 weight of the machine ca.:13 ttable turning speeds:100 U/mintable diameter:250 mmmin. number of teeth:4 hob turning speeds:1500 U/minmax. hob diameter:160 cutter length max.:230 mmMachine in good condition.Available 01.08.2024 ... more information

max. wheel diameter:200 mmgear width:60 mmmax. module:7 weight of the machine ca.:15 ttable diameter:180 mmtable turning speeds:100 U/minhob turning speeds:750 U/minMachine in good condition, without feed, without automationAvailable 24.08.2024 ... more information

max. workpiece diameter:470 mmworkpiece diameter:470 mmmax. distance spindle nose and rollerhead carrier:2150 mmmin. dist.spindle nose / chuck:1950 mmmax. length of teeth cutting:400 mmrollerhead dia. max.:115 mmno. of teeth (continued procedure):12 - 96 no. of tooth single indexing:12-96 feeds -stepless-:40 - 240 mm/minrapid traverse:1800 mm/mintotal power requirement:18,5 kWweight of machine approx.:10000 kgdimensions with soundproof cabinet:4000 x 2250 x 2000 mmCold Rolling Machine GROB ZRM 95 M in good condition, has been used to machine the gearing of the Cardan Shaft by OEM Quality Standard.The Bed of the machine is not Standard size, it has been delivered to the needs of the first owner MAN - for Truck Cardan Shafts.

max. wheel diameter:600 mmmax. module:10 min. module:2 total power requirement:1,4 kWweight of the machine ca.:0,68 tdimensions of the machine ca.:1,6x0,75 mdiameter of hob:15 mmgear width:140 mm ... more information

max. wheel diameter:215 mmgear width:40.65 mmLargest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mmy-axis:(vertical) -102 to 178 mmz-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mmb-axis:3 - 90 °max. distance machine center to spindle slide:115 mmmax. nos. of teeth:5 - 200 ( inclusive ) St.workpiece external diameter max.:215 mmtooth profile - width x height:16 x 40,65 mmgrinding wheel diameter:51 -190 mmgrinding wheel turining speeds:1000 - 6000 1/minworkpiece turning speeds:0 - 30 1/minworkpiece spindle bore:konisch 3-29/32 "speed of axis:125 mm/sec.total power requirement:20 kW - 380 V - 50Hz kwweight of the machine ca.:10000 kos.dimensions of the machine ca.:4750 x 3400 x 2540 mmModel 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 914904, New 1996. Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinion ...

max. wheel diameter:5 - 260 mmgear width:400 mmmax. module:15 min. module:0,5 gear hobbing diameter - internal:30 mmmax. helix angle:> 85 ° Aussenverz.max. helix angle:> 45° Innenverz.Testing Range vertical:400 mmdist. between centers:5 - 600 mmtable diameter:260 mmmax. table load:100 kgspeeds:30 1/mintotal power requirement:1,6 kVAweight of the machine ca.:900 kgdimensions of the machine ca.:200 x 1300 x 2150 mmCNC Gear Tester in good condition, out of OEM Test Lab.For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:130 mmmax. module:3 total power requirement:15 kWweight of the machine ca.:6 tdimensions of the machine ca.:2,3 x 2,5 x 2,17 mA well-preserved CNC hobbing machine Vertical for shafts and wheelsWith tailstockAlso suitable for hard milling (good for steering pinion)Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mmAccessories :Hydraulical workpiece clampingAutomatic ...

max. wheel diameter:180 mmmax. module:5 min. module:1 weight of the machine ca.:14 tdimensions of the machine ca.:4,5 x 2,84 x 2,8 mmin. number of teeth:7 toolpiece turning speed range:4000-10000 U/mintool length:210 mmWith tail stockNo dressing deviceOnly CBN ... more information

max. wheel diameter:180 mmgear width: mmmax. module:4 total power requirement:14 kWweight of the machine ca.:8 tslide travel axial ( Z-axis ):300 mmwork piece - max.:490-640 mm ... more information

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5  ... more information

pulling force - max.:2,5 tmax. ram stroke:1000 mmmax. workpiece diameter:40 mmBroaching speed:60 m/min.return speed:20 m/min.total power requirement:24 kWweight of the machine ca.:6 tdimensions of the machine ca.:1,7 x 2,4 x 4,77 mclamping plate:320 mm ... more information

max. wheel diameter:40-160 mmgear width:90 mmmax. module:3,5 min. module:1,25 weight of the machine ca.:5,6 tFor detailed technical data, see PDF File Page 15-16 ... more information

Description: serial number: 28788 control: SIEMENS Sinumerik 840D  , max. wheel diameter: 130 mm wheel width: 25 mm min. module: 0.5 max. module: 4 stroke rate: 500 - 2500 strokes/min. stroke: 30 mm shock spindle diameter: 85 mm total power requirement: 48 kVA  , please also have a look at the PDF document of this machine max. wheel diameter: 130 mm, module min./max.: 0.5 / 4, gear width: 25 mm, control: SIEMENS Sinumeric 840D, stroke length max.: 30 mm, no. of strokes: 500 - 2500 rpm, total power requirement: 48 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 3,500 x 3,000 mm

Description: SPECIFICATIONS Character: DMF Type: 8U300 Machine weight: 1,800 kg Measuring length: 300 mm Sheet thickness: 8 mm Machine weight: 1,800 kgweight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 1,200 mm ... more information

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...

Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm