subcategories
(3rd category level)
Manufacturer:
(Category: 202)
x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working piece thickness (Radius) ca. 16 - 55 mmWorking piece thickness (Chamfer) ca. 12 -55 mmWorking piece width min. Ca. 30 mmInner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours)Edge thickness max. ca. 3 mmMilling motor 2 x 0,4 kW, 10950 o/min.Dust extraction 1 x diam. 80 mmWorking height 900 mmRadius 3 mm tooling
I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.
SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)
Description: serial number: AB/146367 Technical specifications: spindle diameter 50 mm spindle height 180 mm height adjustment useful stroke 140 mm rotation spindle speed: 3000 / 4500 / 6000 / 7000 / 10000 maximumum tool diameter 250 mm table top dimensions 1200 x 730 mm height from base 925 mm voltage 400 V, 3 phases, 50 Hz, 12 A motor power 5.5 kW serial number: AB/146367, packing measure approx (l x w x h): 1,200 x 730 x 925 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,300 mm, weight approx.: 600 kg
SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002 ... more information
Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002
SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002
SPECIFICATIONS: Semi-automatic press brake milling machine strap thickness mm: 3 workpiece height mm: 60 ... more information
Description: FRAME MILLING MACHINE WITH FURNITURE & ACCESSORIES Brand: HOFFMANN Type (Model) : MU-2 Serial number : 17700 CHARACTERISTICS OF THE MACHINE : - Milling depth: 0-85 mm - Height of passage: 125 mm - Possible cone sizes: w-1-2-3-4 - Power supply: 230 v. 50 Hz - Motor: 450 w - Speed: 27000 rpm - Cast-iron frame - Suction Ø 60 mm - CE mark Machine supplied with : - Straight stop - 45° stop - One second-hand cutter fitted, not defined - Box of joiners to be defined Dimensions for transport (WxDxH): 690 x 600 x h.850 mm Weight: 30 kg Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 690 x 600 x 850 mm, weight approx.: 30 kg
BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed... ... more information
Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!
Urge to sell, Andi Anderson brand wood CNC machining center, with Fanuc 18I control. Table 4250x2000, 12 tool change. Busch vacuum pump. Currently working, it is exchanged for a larger one. ... more information
Description: Stress-free, all-steel construction Ball screw nuts on X, Y and Z axes 25 mm heavy duty linear guides Automatic tool calibration Maximum rapid traverse speed 930 mm/sec Maximum milling speed 510 mm/sec User-friendly Multicam controller Simultaneous 3-axis steering at high speed 12 MB memory on the processor card Standard Ethernet or RS232 connection Mill very large files via the standard DNC Colomo spindle: ISO30 , Machine Power: 5.5 kW Machine Speed: 24.000 rpm There is no changer on the machine, but it is prepared for it. Extra: Pallet with electrical equipmentmain motor: 5.5 kW, tool taper: ISO30, Approx. Onsite Dimension. (l x w x h): 1,600 x 2,400 x 2,600 mm, weight approx.: 1,500 kg
CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...
Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003
Edge thickness max mm: 3 Workpiece thickness max mm: 60 Total connection kW: 1.1 Weight Kg: 110 ... more information
SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P -Volt. 380/50 - S/W 76 - CE year 2003 ... more information
3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...