injection moulding machines used for sale

Engel hose pouring machine type: 4550/700 duet with Robot control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 700 opening ways mm: 1400 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 450/ record size: 1570 x 1470 hose unity snail diameter mm: 90 hose weights gr: 2233 hose volumes cm?: 2481 hose pressure cash: In 1910/2180 mass and weights dimensions LxBxH m: 9.2 x 3 x 2.67 machine weights kg: 30.000/10.000 other Neureder Robot

Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930

Used machine in good condition. Available for immediate delivery. - Screw diameter: 90 mm - Injection pressure: 1.919 bar - Injection volume: 2.740 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 300 / - mm / kN - Clamping force: 8000 kN - Mould opening stroke max: 1.350 mm - Mould height max: 2.000 mm - Mould height min: 650 mm - Platen size (h x v): 1.570 x 1.480 mm - Distance between tie-bars (h x v): 1.025 x 935 mm - Core pulls: 5 - Operating hours: 62.870 - Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm - Weight: 38.000 kg

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:1250 kN ... more information

Injection molding machine Manufacturer: Arburg Type: 320 S 50-60 Year of construction: 1997 Screw: 18 mm Clamping force max.: 500 kN Max. opening distance: 350 mm Tool installation height min.: 225 mm Tool clamping plates (WxH): 498 x 498 mm Weight bew. Half weight max.: 400 kg Effective screw length L/D: 24 Worm travel max.: 110 mm Moulded part weight max. g/PS: 45 Spray pressure max.: 2500 bar Worm torque max.: 325 Nm Screw circumferential speed max.: 54 m/min. Capacity granule container: 50 litres Horizontal injection position max.: 120 mm As an accessory, a removal is included. A screw with a diameter of 18 mm is mounted in the machine. The machine is fully functional and has always been maintained by Arburg.

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...

Battenfeld BA 1300V/315 V-R / Vertical injection moulding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Spray weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 454x740 mm Size of clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Metrics: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technica ...

Battenfeld Plus 350/75 Year of construction: 1997 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Euromap 12 Robot Interface Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column  ... more information

Injection molding machine Engel ES 1350/250 HL ST with dryer  ... more information

Year of construction: 1997 Control type: MC3F Injection unit: ..,/135 Screw diameter: 30 mm Spec. Spray pressure: 2025 bar Injection volume: 74 cc Injection weight in hp: 68 g Clamping unit: 80/... Clamping force: 80 t Size of the clamping plates: 610 x 610 mm Lights tie bar distance: 405 x 405 mm Installation height: 250 mm Opening distance: 500 mm plate spacing: 750 mm Ejector travel: 150 mm Hydr. Drive power: 15 kW Cylinder heating capacity: 9 kW General information: Caption: Polskie Delivery time: Short term Size(m) LxWxH: 3.8 x 1.4 x 2.0 m Weight: 3.200 kg

Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control

Machine dimensions Length 3900mm Width 1200mm Height 1900mm Weight 3200 kg Closing system Knee closure type Clamping force 90t Ejector stroke 750 mm Mold height max 350 mm Mold height min 125 mm Clearance between columns 360 x 360mm Injection system Screw diameter 31 mm Max injection pressure 216 MPa Max injection volume 120g Max injection speed 53 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 800 x 800 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] 220-520 Maximum opening width [mm] 970 Injection unit Screw diameter [mm] 55mm Injection volume [cm3] 522 Injection weight [g] 595 Injection pressure [bar] 1943 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 22.6 Dimensions and weight Net weight with control cabinet [t] 9.8 Dimensions (L x W x H) [m] 5.65 m x 1.45 m x 2.10 m

Producer DEMAG Type Ergotech pro 50-270 Year 1997 Clamping unit Clamping force 50 ton Opening stroke 400 mm Distance between tie bars 355 x 355 mm Mould height min. 210 mm Platen size (h x v) 540 x 540 mm Injection unit Screw diameter 35 mm Injection volume 106 cm³ Shot weight 95 g Injection pressure 2573 bar Measurements and weight Dimensions 3,65 x 1,15 x 1,18 m Machine weight 3600-2500 kg

Clamping unit Clamping force50 ton Opening stroke350 mm Distance between tie bars320 X 320 mm Mould height min.300 mm Mould height max.550 mm Platen size (h x v)446 X 446 mm Injection unit Screw diameter30 mm Injection volume85 cm³ Shot weight75 g Injection pressure2200 bar Measurements and weight Dimensions3,25 x 1.15 x 2,0 m Machine weight2250 kg

Connected load: 40kVA. ... more information

Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t. ... more information