injection moulding machines used for sale

Injection weight: 210g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 420 x 420 mm Plate size: 605 x 605 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 meters Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, bimetallic screw

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software. ... more information

Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. ... more information

Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On ...

Sintesi 200 injection molding machine, complete with TRIA crusher Production - Italy. It is in working order, but the processor is faulty (partially replaced by a relay); Locking force in tons - 200 T; Flow diameter 50 mm; Dist. X between posts 530 mm Dist. Y between columns 530 mm Serving size 442 cm³ Serving weight 546 g Material pressure 2058 bar Plate length 790 mm Plate width 790 mm Bimetal screw No Equipped with robot No Robot interface si Number of heating zones 5 Press inlet 650 mm Length x width x height 6200.0 × 1430.0 × 2260.0 Weight 9000 kg

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1345 x 1280 Clearance between columns (hxv) [mm] 915 x 860 Maximum opening width [mm] 850 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1960 Injection weight [g] 1765 Injection pressure [bar] 1730 ... more information

Manufacturer Ferromatik Model K275-s Year 1998 Clamping Force 2750 kN International dimensions 2750 H-1636 Injection pressure 1575 bar screw diameter mm 80 injection volume cm³ shot capacity gr 1450 injection pressure bar 1575 Stroke volume 1040 cm3 Motor 55 kw Heating 22.7kw Weight 13.6 T

Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h. ... more information

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Operational hours counter: 59,129h, with Handling PSA 2080. ... more information

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

This DEMAG Ergotech 200-840 Compact was manufactured in 1998. A robust injection moulding machine with a clamping force of 2000 kN and a screw diameter of 45 mm. It features a DEMAG NC4 control system and includes a Wittmann robot. Ideal for precision molding, the machine we have for sale offers a shot weight of 326 g/PS and an injection pressure of 2400 bar. For more information about this injection moulding machine, please reach out to us.

This Krauss Maffei 300-1400 C1 was manufactured in 1998. A robust injection moulding machine, it features a clamping force of 3,000 kN and an MC 3 control unit. It has operated for approximately 18,176 hours. Extras include Ø60 mm and Ø70 mm barrels, and a PVC barrel with a Ø70 mm blower. A great opportunity to buy this Krauss Maffei 300-1400 C1 injection moulding machine. Contact us for further details.

This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of 1650 kN and a screw diameter of 40 mm. ... more information

Description 6 zone mold heating ... more information