Manufacturer:
(Category: 308)
Slitter rewinder for paper and foil Manufacturer = Titanium, Type SR7 Max. material width = 1350 mm Max. working width = 1300 mm max. speed = 400 m/min Diameter unwinder = max. 1000 mm Rewinder diameter = max. 800 mm 76 / 152 mm sleeve With pressure roller Friction Waves 76 / 152 Cutting system = paper cut Upgrade 2007 with automatic knife adjustment (Newtec) Motor with electric brakes Side edge control With adhesive table Roll removal device
For sale here is a 3D printer from the BigRep brand Studio G1. This machine is a showroom unit and will be serviced by a specialist dealer before delivery. The software comes from the manufacturer BigRep, which is closely based on the well-known Cura., operating hours: few, Installation: 2017, Installation space in mm (x/y/z): 1000x500x500, software: BigRep Blade, network connection: USB / Network, support material: Compatible with all popular 3rd party filaments , Layer thickness: 0.1mm 0.4mm, number of nozzles: 2, extruder units: Fiber-Ready Dual Extruder, Print bed temperature in °Celsius: Max. 100°C, Weight in kg: about 600KG, Power supply: 208V - 240V, 16A, 50/60Hz, security certification: CE approval, building material: BigRep ASA, BigRep ABS, BigRep BVOH, BigRep HI-TEMP, BigRep HI-TEMP CF, BigRep PA6/66, BigRep PETG, BigRep PLA, BigRep PLX, BigRep PRO HT, BigRep TPU 98A Comp ...
Used HP4200 MultiJetFusion 3D printer in good condition for sale, Equipment:, 1 piece Processing stations, 2 pcs. Build Units ... more information
Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S, ... more information
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30 ... more information
The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.
Maszyna Maklaus model Res-Uni SPECIFICATIONS: Max. rewinding speed 1500 meters per minute Cycle production time 17-21 seconds (for 250 meter rolls) Max. diameter of mother roll 550 mm Max. material width 600 mm Min. material width 450 mm Max. diameter of finished roll 300 mm Mother roll core diameter 76 mm Inside diameter of finished roll 50 mm (30mm, 32mm, 38mm, 42mm, 76mm optional) Material thickness 10 micron - 50 micron Installed power 14 Kw Voltage 400 V Air pressure 6 bar Compressed air consumption < 100 liter per minute Machine overall dimensions 1350x1800x2200 mm Machine weight 1250 Kg STANDARD FEATURES INCLUDE: â— Two Servo Drive microprocessor controls â— On - board computer controls â— Touchscreen Operator Interface in operator language â— Electronic rewinding tension control â— Integrated command pulpit â— Pneumatic device for the Lifting of Mothe ...
For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...
This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994 ... more information
This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes
Roland EGX-350 engraving machine, perfectly packed, almost unused. ... more information
Year: 2009 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control ... more information
Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control ... more information
Film buffer silo: 10000 litres, geared motor: 2.2 KW (3 hp). With remover. ... more information
For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible. ... more information
Conveyor belt Length: 6 m Width: 0.58 m. Legs with wheels. Reference: GT-4618 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice. ... more information
Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.
Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table ... more information
Year: 2000 - technically efficient, ready to work - after full service - manual feed - pneumatic profile clamping ... more information
I would like to offer the UHG 500 Easy vacuum chamber. It was purchased in 2018 at a price of €24,980, has been in operation for a total of 510 hours and is in very good condition. In addition to two Memmert ovens (see attachment), the vacuum chamber also includes a handling table with a load capacity of 1,000 kg, a new silicone mixing attachment (for a drill). We will give the chamber a set of spare funnels, inserts, tubes, dividers, cups and anything else we can find for it. We are getting rid of the chamber due to the specialization of our company in 3D printing using stereolithography, due to capacity reasons it is no longer important for us to do vacuum casting as well. The buyer must arrange the transport, there is a loading ramp available.