- (43)
- Automatic Drillers (28)
- Automatic thread drills (1)
- Battery powered drilling machines (9)
- Bench Type Drilling Machines (55)
- Boring Mills (59)
- Centre Drilling Machines (3)
- CNC Boring Mills (27)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (181)
- Contracting Pods Panel Drills (8)
- Core hole drills (1)
- Core-drilling machines (1)
- Deep Hole Drilling Machines (57)
- Drilling And Milling Machines (31)
- Drilling Centres (4)
- Drilling Machines (86)
- Fine Boring Machines (1)
- Gang Drilling Machines (22)
- Hand drills (16)
- High Performance Drilling Machines (4)
- High Speed Drilling Centres (HSC) (1)
- High Speed Machining Centres (HSC) (5)
- High Speed Radial Borers (14)
- Horizontal Boring And Milling Centres For Cubical Workpieces (3)
- Horizontal Numerically Controlled Machining Centres (50)
- Horizontal Processing Centers (40)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (4)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (2)
- Milling machine centers (10)
- Milling machining centres (4)
- Multi Spindle Drilling Machines (34)
- Multiway Drilling And Boring Machines (2)
- Numerically Controlled Machining Centres (296)
- Other Drilling And Boring Machines (8)
- Other Machining Centres (12)
- Panel Drills (12)
- Pillar-Type Drilling Machines (79)
- Portal machining centres (8)
- Precision drilling machine (1)
- Processing Centers (167)
- Profile processing centres (2)
- Radial Drilling Machines (94)
- Round Turntables (5)
- Slotted hole drill presses (1)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (1)
- Table Drills (59)
- Tapping Machines (31)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (10)
- Universal mills (1)
- Universal processing centres (64)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (191)
- Vertical Processing Centers (123)
- Vices For Machines (196)
- more
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (24)
- ACME (1)
- ADRIASTROJ (1)
- AEG (6)
- AERRE (1)
- AFD (1)
- AGIE - CHARMILLES (1)
- AGIE - CHARMILLES 3R (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (2)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESA MONTI (1)
- ALESAMONTI (1)
- ALFRA (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (34)
- Alzmetall (122)
- AMADA (1)
- ANAYAK (1)
- ANGER (1)
- ANJO (3)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (9)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNOLD (1)
- ARSENAL (1)
- ASDORF (1)
- ATLAS COPCO (1)
- ATOLL (1)
- ATORN (2)
- AUDAX (1)
- Auerbach (5)
- Avia (8)
- AVIA FOP (1)
- Awea (8)
- AXA (18)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (2)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKHOFF (1)
- BEMATO (1)
- BERARDI (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (18)
- Bernhard Steinel (2)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (5)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (4)
- BLUTHARDT/PARABO (1)
- BMW (2)
- BOEHRINGER (1)
- BOLEY (1)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BOSCH (1)
- BREDA (5)
- BREVETTI MOTTA (1)
- BRIDGEPORT (23)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BROTHER (19)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 101)
New in: 1951
used
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. ... more information
used
Rotational speed: 37-1900/min, an inspection is possible. ... more information
New in: 1998
used
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible. ... more information
New in: 2020
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
Number of tool slots: 30, connected load: 18kVA, controls: Fanuc O-M, with chip conveyor, was maintained regularly. ... more information
New in: 1996
used
X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: NC + 2 pallet changers, controls: Heller uni-Pro CNC 90, the machine needs to be overhauled, a power module is defective, therefore Z-axis does not move, reference point approach not possible, with documentation. ... more information
New in: 2015
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
New in: 2015
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
New in: 2014
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
New in: 2014
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
New in: 2006
used
X-travel: 800mm, y-travel: 800mm, z-travel: 800mm, max. rotational speed: 18,000/min, number of tool positions: 240, number of pallets: 45, rotary table dimensions: 900x700mm, control: Heidenhain iTNC 530, operating/spindle hours: 182,249/ 116. 336h, with tool storage, pallet automation, chip conveyor, handling robot, collision protection Branenkamp, loading crane, zero-point clamping system, accuracy package, automatic swivel milling head, horizontal tool changing device, double gripper, 240 magazine positions HSK 63, NC rotary table, coolant tank 900l, IKZ 80bar through spindle center (AD), chip conveyor, rotating inspection window, 3D path control, was regularly maintained by the manufacturer, on-site inspection is possible.
New in: 2007
used
X-travel: 1300mm, y-travel: 710mm, z-travel: 710mm, table height: 710mm, table dimensions: 1500x660mm, table height: 880mm, max. workpiece weight: 1.2t, length: 3400mmm, width: 3240mm, height: 3000mm, weight: 5.5t, with tools, has been regularly serviced, on-site inspection is possible. ... more information
New in: 2020
used
A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.
used
Control: Heidenhain TNC 430M, connected load: 30kVA, operating hours: 27,879h, the machine is heavily used, X- and Y-axis need to be overhauled, the motor of the Z-axis is defective, an on-site inspection is possible. ... more information
New in: 1992
used
Travel X/Y/Z: 1000mm/1250mm/800mm, quill stroke: 500mm, max. workpiece weight: 4000kg. Clamping surface length/width: 1000mm/1250mm, T-slot width/spacing: 22H7/125mm. Drill spindle diameter: 102mm, tool holder: A50 DIN 2080. Spindle speeds (3 rows, infinitely variable): 4-1600min⁻¹. Max. feed X/Y/Z/W axes in mm/min: 6000/6000/6000/4000. max. feed B-axis: 0-2.5min⁻¹. Space requirement: 17.35m², net mass: 10,400kg, control: Heidenhain TNC 415.
New in: 2007
used
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.
New in: 1957
used
Speed: 1000 rpm, weight: 2400 kg. On-site viewing is possible. ... more information
used
Table size X/Y: 900mm/1400mm, control: CNC H 646, travel X/Y/Z/W: 1120mm/710mm/315mm/630mm, spindle diameter: 125mm, spindle speed: 2240rpm, max. table load: 1000kg, dimensions X/Y/Z: 4000mm/2460mm/3030mm, weight: 8800kg. On-site inspection is possible. ... more information
New in: 2015
used
Control: Sinumetrik 840D sl, operating hours: 41634h, spindle running time: 19155h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Chip conveyor: KNOLL 800 K-1, cooling lubricant preparation, cooling unit: Lahntechnik LM 220-32.
New in: 2016
used
Traversal X/Y/Z: 670/820/600mm, swivel range: +/- 120°, tool storage: 120 places. Table load: 1,200kg, spindle speed: 18.00 n/m, rotary table: Ø 800mm, endless 360 degree rotation. Tool holder: HSK 63, Max. Weight tools: 8kg, Pneumatic: 6bar, Control: Heidenhain TNC 640. Machine hours: 12,400h, Spindle running time: 2,340h, Options available: IKZ variable, variety of HSK fixtures as good as new. Dimensions length/width/height: 4150mm/5000mm/3500mm, weight: 20 tons