subcategories
(3rd category level)
Manufacturer:
(Category: 101)
Number of axis: 5, max. rotational speed: 6000/min, pallet dimensions: 1700x1700mm, number of tool slots: 208, connected load: 110kVA, controls: Siemens 840D, weight: 50t, operational hours counter: 60.632h. ... more information
bore capacity in steel (diameter):40 mmarm length:1200 mmworkpiece height max.:1227 mmsurface area:1475 x 900 mmno. of flutes:3 groove width:25/ 50 mmspindle cone:MORSE 4 number of spindle speeds:45- 2800 U/minspindle headstock:Bew.Arm : 945 mmwith vertical adjustment:Arm 710 mmspindle diameter:35 mmbore depth:300 mmtotal power requirement:3,0 kWweight of the machine ca.:2800 kgdimensions of the machine ca.:2290 x 910 x 2860 mm
bore capacity in steel (diameter):50 mmspindle cone:V MKspindle stroke:340 mmhight above plate:1230 mmrevolutions of the spindle, 16 steps:25 - 2000 U/minHeight adjustment:580 mmautomatic feed rates:0,04 - 3,2 mmtravel of the spindle head on the arm:1250 mmtable height:500 mmdimension of the dice table:630 x 500 x 500 mmMotor output:4 kWrange L-W-H:2500 x 1070 x 2840 mmweight:3500 kgMachine description:- stable cast body- Gearbox with hardened and ground gear wheels in oil bath- Thread cutting via spindle reversal- Hardened and ground heavy column- right-left-run- drilling depth limitation- high spindle torque- Feed overload clutch- quiet running- Hydraulic, switched feed and spindle gear with preselection- Hydraulic clamping of the stop, the column and the drill head- Ground and hardened guideways- ergonomically arranged controls- Lighting - standard- Coolant system - standard- Dice tab ...
X-travel: 800mm, y-travel: 630mm, z-travel: 630mm, controls: uni-Pro NC 80-C, length: 5600mm, width: 4200mm, height: 3600mm, weight: 12t, operational hours counter: 88,356h, with documentation. ... more information
:FB-160 spindle diameter:160 mmx-travel:4000/6000/8000/10000/12000/14000/16000 mmy-travel:2000/2500/3000/3500/4000 mmz-axis:1200 mmw-axis:700 mmspindle cone:50 SK/BTspindle speed max.:3000 U/minspindle drive:37/51 kWfeeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/minrapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/minmax. torque on the spindle:3.300 Nmcross section of ram:460x520 mmtable load:30 ttable-size:2500x2500 mmtable travel:1500 mmweight of the machine ca.:FBM-160 mit X=4m: 80 tpositioning accuracy:0.032/1000 mmrepeating accuracy:0.018/1000 mmCNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more.Newly developed FB seriesConvenient for a variety of ma ...
workpiece thickness max.:80 mmworkpiece thickness min.:5 mmplate size without being adjusted:2000x1000 mmsize of plate min.:100x100 mmcontrol:CNC Mubea Matic100 hole diameter:min/max:10/40 mmworkpiece weight:750 kgdeburring device max.:d=40 mmtraversing speed:80 m/minwork height max.:1050 mmpositioning accuracy:+/- 0,5 mmopening of gripping pliers min/max.:Typ I: 5/45 mmopening of gripping pliers min/max.:Typ II: 45/85 mmfeed length:max. 150 mmrapid traverse::8 m/minspindle turning speed range:112-180-224-280-355-560 U/minwork table::L:2500;B:950 mmarm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mmcross travel:y=1000 mmbore spindle stroke:max. 150 mmtotal power requirement:25,0 kWweight of the machine ca.:5,5 tspace requirements approx. LxWxH:5,0x5,5x2,7 mplate size with beeing adjusted also 1000x4000 mm possiblewith roller conveyor 2x1000mmmaterial supp ...
There are two identical machining centers available, table dimensions: 850x530mm, number of tool slots: 48, controls: Heidenhain iTNC 530, operational hours counter machine 1/2: 37,800/36,900h, with tool magazine and documentation. ... more information
bore capacity in steel (diameter):5 - 30 mmx-travel:450 mmy-travel:380 mmtotal power requirement:1,4 / 2,2 kWweight of the machine ca.:1.100 kgdimensions of the machine ca.:1.000 x 1.400 x 2.900 mmgear box:85 - 2.000 U/minspindle diameter:72 mmbore depth:700 mmthroat:300 mmspindle taper MT:3 T-slots:3 x 16/25 mmtable-size:700 x 300 mmspindle turning speed range:85/170/250/355/475/710/1000/2000 U/minmotor speeds::705/1425 Year:ca. 1975
X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.
bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm ... more information
X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible. ... more information
bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm ... more information
Connected load: 5kW, weight: 3t. ... more information
Boring power:10 mmweight:590 kgconnected load:2 kWdimensions::1500 x 1300 x 2300 mm ... more information
throat:580 mmbore stroke:650 mmX-axis :3300 mmy-axis:550 mmz-axis:650 mmDrill head RPM:bis 3800 U/minDrive x + y + z axis:Servomotor Rapid traverse x axis:20 m/minRapid traverse y axis:10 m/minRapid traverse z axis:10 m/minDistance table top - bottom Chuck:700 mmTable width:560 mmT-slots:14 Threaded drill up to:M4-M20 Tolerance x axis::0,1 mmTolerance of y and z axis::0,06 mmtotal power requirement:4 kWweight of the machine ca.:ca. 4 tdescription of the Company Bauer:Drilling rig driving stand principle the table stops, the drill head moves. Simple operation, CNC knowledge is not required. Data import DXF and CSV. Robust design with proven engineering components and a clearer structure of the machine guarantee high availability and long service life. All this for a price which paid off faster than expected.In the development of the control system, special attention was given to easy oper ...
Stroke: 780mm, rotational speed: 30-1700/min. ... more information
bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:100 mmtotal power requirement:0,7 kWweight of the machine ca.:302 kgdimensions of the machine ca.: 620 x 800 x 1950 mmTable dimensions:350 x 250 mmspindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min ... more information
For sale Hermle vertical machining center type C 1200V with a Heidenhain i TNC 539 controller. X-, Y-, and Z-axis movement is 1200 x 900 x 500 mm. Table size is 1440 x 900 mm. ... more information
For sale Very strong Mori Seiki horizontal machining center type NH-8000 DSG II. The machine is equipped with 2 pallets (800 x 800 mm). The maximum workpiece weight is 2,000 kg. The spindle nose is BT-50 BIG PLUS and has a maximum speed of 8,000 rpm with a very high torque. In addition, the machine has a tool magazine with 110 places, cooling by the spindle with Knoll high-pressure system with a maximum pressure of 70 BAR. The controller is the Fanuc 31i-MB (MSX-701) controller. The machine comes with 3 additional pallets and several columns. If you are interested, please send an e-mail to chrismachinematch.nl
Doosan NHP5000 Horizontal Machining Center Year: 2020 Highlights: Fanuc 31i-Model B CNC Control Coolant Thru Spindle (MP Coolant Systems) Doosan LPS 5000 - (12) Station Pallet Pool System Renishaw OMP60 Spindle Probe Broken Tool Detection MistFit MF550 Mist Collector RTS-AA Touch Tool Setter LIKE NEW, Only 257 Cutting Hours Control Type Fanuc 31i-Model B # Axis 4 Pallet Length 24.8" Pallet Width 24.8" Pallet Load Capacity 3,307 pounds Pallet Indexing (B-Axis) 0.001° X-Axis Travel 31.5" Y-Axis Travel 29.5" Z-Axis Travel 33.5" Rapid Traverse Rate (X/Y/Z) 2,382 ipm Spindle Taper CAT 40 Spindle Speed 15,000 rpm Spindle Motor (HP) 50 hp Tool Changer Capacity 275 Coolant Through Spindle yes Machine Dimensions 234" x 145" x 131" Machine Weight 38,000 pounds