boring mills and machining centers used for sale

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Inv. Num: 5441 Type: HSA - 428EA Producer: Hartford Generated: 2015 Parameters: Control system: Heidenhain 530iHSCI Working table length: 4000 mm Working table width: 2500 mm Maximum table load (even): 6000 kg Number of synchronized axes: 5 pieces Mechanical feed length Axis X: 4000 mm Mechanical feed length Axis Y: 2000 mm Mechanical feed length Axis Z: 1500 mm equipment: Technical documentation Conveyor Handwheel cube Spindle head Spindle extension Screw sticks (2 pieces)

Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry

Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm

This machine has already been completely overhauled by the company FPS Werkzeugmaschinen. General: Control Heidenhain MillPlus Travel X 500 mm Y 400 mm Z 400 mm Spindle: Speed 9,000 rpm Tool holder SK40 Tool Changer: Number of stations 16x Dimensions and weight: Dimensions 2,300 mm x 2,100 mm x 2,050 mm Weight 3,200 kg Other equipment and accessories included: Swivel rotary table manual (integrated into the control system)

This machine has already been completely overhauled by the company FPS Werkzeugmaschinen. General: Control Heidenhain MillPlus Travel X 500 mm Y 400 mm Z 400 mm Spindle: Speed 9,000 rpm Tool holder SK40 Tool Changer: Number of stations 16x Dimensions and weight: Dimensions 2,300 mm x 2,100 mm x 2,050 mm Weight 3,200 kg Other equipment and accessories included: Swivel rotary table manual (integrated into the control system)

DMG Mori M1, Year of manufacture 2021, Siemens 828 D control system with Shop Mill, Travel X/Y/Z 550/550/510 mm, IKZ 20 bar, Tool changer 24-speed, SK 40 mount, Conveyor Renishaw touch probe, Table size 850 x 650 mm, max. table load 650 kg, Bed Rinse via M function, Canopy prepared oil mist separator, Machine weight 5600 kg, Machine without oil mist extraction, without clamping devices, Interface Automation,

DMG Mori M1, Year of manufacture 2021, Siemens 828 D control system with Shop Mill, Travel X/Y/Z 550/550/510 mm, IKZ 20 bar, Tool changer 24-speed, SK 40 mount, Conveyor Renishaw touch probe, Table size 850 x 650 mm, max. table load 650 kg, Bed Rinse via M function, Canopy prepared oil mist separator, Machine weight 5600 kg, Machine without oil mist extraction, without clamping devices, new milling spindle 2024, Interface Automation,

NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...

Digital. Workspace: Travel longitudinal X-axis 450 mm Transverse Y-axis travel 260 mm Quill stroke Z-axis 120 mm Travel of machine head W-axis 450 mm Rapid traverses XY: 1,500 mm/min Workroom: Clamping surface L x W 770 x 320 mm Table (KS 321-M) Tool Quick Coupler System : SF 32 Working spindle: Speed range (infinitely variable) 50 – 9200 rpm Dimensions: Space requirement (width x depth x height) 1500 x 1480 x 2330 mm Weight: Weight approx. 1,300 kg

MATSUURA ES-450HII PC-5 4 Axis Horizontal Machining Center Year of manufacture 2001 Control FANUC 18i – M Machine number 10414639 Travel X – 450 / Y – 400 mm / Z – 400 mm B-Axis 360,000 Equipment: Tool magazine with 61 places Pallet storage for 5 pallets 300 mm x 300 mm and set-up station Spindle SK 40 Speed 50 – 15,000 rpm. NC rotary table as B-axis KNOLL coolant system Cooling system HYFRA Coolant filter system Conveyor Operating Instructions/Documentation Machine data on storage medium All other accessories visible in the photos and video are not included in the scope of delivery, so they are not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. More photos on request. Equipment, technical data, plans and transport – illustration, content and informati ...

MATSUURA H.PLUS-300 PC-5 4 Axis Horizontal Machining Center Year of Make: 2003 Control: FANUC /MATSUURA G-Tech 16i Machine number 31015529 Travel X – 500 mm / Y – 500 mm / Z – 500 mm B-Axis 360,000 Spindle new 2021 Engine new 2021 Tool changer and gearbox overhauled in 2022 Equipment: MATRIX tool magazine with 240 seats Pallet storage for 5 pallets 300 mm x 300 mm and set-up station Spindle SK 40 Speed 50 – 15,000 rpm. NC rotary table as B-axis rapid traverse and feed rate 50 rpm. RENISHAW MP 10 touch probe Tool breakage detection Rotating viewing panel Pressure Load Cell for Tool Length Measurement KNOLL coolant system Scraper belt chip conveyor with lifting pump and chip removal Coolant supply through the spindle 70 bar External cooling 1.4 bar Coolant filter system Cooling Water Recirculating Cooler VWK 70 Coolant spray gun Air nozzle on the heads ...

4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

5-axis machining center Manufacturer: Deckel Maho Type: DMC 80 U duoBlock Year of Make: 2006 Control: Siemens 840D Powerline with Shop Mill interface Travel paths X/Y/Z: 800 x 800 x 800 mm Pallet carrier as C-axis (infinitely variable) B-axis (infinitely variable) Pallet size: 800 x 630 mm 2 pallets Spindle 20 – 10,000 rpm Tool Changer: 60 Interface: HSK A 100 IKZ 70ig Bar Coolant tank with paper belt filter: approx. 600 litres Rinsing gun Conveyor Bed Wash Accessories: Tool holders HSK 100 A: approx. 190 pieces Weldorn recordings: approx. 95 pieces Cutter head holders: approx. 9 pieces MK drill holders: approx. 12 pieces Unscrewing: approx. 7 pieces

CNC Machining Center Vertical Manufacturer: MAZAK Type: VC-NEXUS 510 C Year of Make: 2006 CNC Control: Mazatrol PC Fusion CNC 640 M Nexus Workspace: Table size (clamping surface): 550 x 1300 mm Max. table load: 1,200 kg T-slots: 5 pieces T-slot spacing: 100 mm Groove width: 18 mm Travel X/Y/Z: 1,050 x 510 x 510 mm Rapid traverse: 36m/min. Feed: 1 – 8,000 mm/min. Distance between spindle nose and table: 150 – 660 mm Working spindle: Speed range: 35 – 12,000 rpm. Tool Shank: SK40 Main drive cable: 18.5 kW Tool magazine: Tool positions: 30 Tool Ø max.: 80 mm at free extension: 125 mm Tool length max.: 350 mm Tool weight max.: 8 kg Machine weight approx.: 6,900 kg Machine dimensions approx. L/W/H: 3.00 x 2.85 x 2.85 m Accessories: Tool length measuring device Coolant device complete. Coolant and chip protection Workspace lighting 3.5" floppy ...

Maho DMU 100 T / 5 Axles, Year of manufacture 2005, Control Heidenhain iTNC 530, Travel X/Y/Z 1060/710/710 mm, NC rotary table integrated into rigid table, NC swivel milling head - B axis infinitely variable, Spindle speed up to 12,000 rpm, SK 40, Conveyor 3D infrared probe, 3D Quick Set, Tool changer 32-speed,

-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

For sale Hermle vertical machining center type C 1200V with a Heidenhain i TNC 539 controller. X-, Y-, and Z-axis movement is 1200 x 900 x 500 mm. Table size is 1440 x 900 mm.  ... more information

Doosan NHP5000 Horizontal Machining Center Year: 2020 Highlights: Fanuc 31i-Model B CNC Control Coolant Thru Spindle (MP Coolant Systems) Doosan LPS 5000 - (12) Station Pallet Pool System Renishaw OMP60 Spindle Probe Broken Tool Detection MistFit MF550 Mist Collector RTS-AA Touch Tool Setter LIKE NEW, Only 257 Cutting Hours Control Type Fanuc 31i-Model B # Axis 4 Pallet Length 24.8" Pallet Width 24.8" Pallet Load Capacity 3,307 pounds Pallet Indexing (B-Axis) 0.001° X-Axis Travel 31.5" Y-Axis Travel 29.5" Z-Axis Travel 33.5" Rapid Traverse Rate (X/Y/Z) 2,382 ipm Spindle Taper CAT 40 Spindle Speed 15,000 rpm Spindle Motor (HP) 50 hp Tool Changer Capacity 275 Coolant Through Spindle yes Machine Dimensions 234" x 145" x 131" Machine Weight 38,000 pounds

Control Heidenhain iTNC 530 Travel x/y/z 635 mm / 510 mm / 460 mm Max. spindle speed 18,000 rpm Drive power of the main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Table clamping surface / max. table load 790 mm x 560 mm / 600 kg Tool changer with 30 positions Rapid traverse 30 m/min Total power requirement / machine weight 23 kVA / 4.5 t Space requirement 3.5 m x 4.0 m x 2.7 m