- (4)
- Accessories (61)
- Angle Heads (17)
- Angle Tables (5)
- Bar Feeders (6)
- Bar Loaders (28)
- Boring Heads (9)
- Boring Spindle Units (1)
- Boring Spindles (7)
- Chip Conveyors (25)
- Circular saw blades (1)
- Clamping Angles (11)
- Clamping Cubes (17)
- Clamping Plates (77)
- Clamping Tables (20)
- CNC Control Systems (21)
- Collet chuck suspensions (1)
- Compressors (5)
- Control Systems For Machine Tools (2)
- Coolant Reservoirs (17)
- Cooling Units (8)
- Cross Slides (4)
- Dividing Units (15)
- Drilling Cube Tables (1)
- Dust extractors (2)
- Electrical (6)
- Electro Magnetic Clamping Plates (2)
- Exhaust extraction systems (15)
- Faceplates (16)
- Facing Heads With 1 Or 2 Facing Slides (3)
- Feed Units (10)
- Feeds (7)
- Fine Boring Units (1)
- Flat surface grinding wheels (2)
- Grinding Discs (5)
- Grinding Spindles (5)
- Handling Units (2)
- Hydraulic Materials (2)
- Hydraulic Power Units (16)
- Indexing Table Units (1)
- Indexing Tables (4)
- Industrial extraction units (2)
- Lathe Chucks (13)
- Machine Tool Accessories (20)
- Machine Vices (19)
- Magnetic Clamping Plates (12)
- Magnetic Plates (7)
- Marking Plates (21)
- Measurement Technology (33)
- Measuring Plates (11)
- Milling Devices (7)
- Milling Spindle Units (5)
- Milling Spindles (5)
- Miscellaneous (4)
- Multi Spindle Boring Units (1)
- Nebula withdrawal systems (2)
- Plate Fields (3)
- Precision vices (2)
- Presetters (1)
- Pump Units (4)
- Reciprocating Compressors (3)
- Refrigerated air dryers (1)
- Round Tables (20)
- Sensors (13)
- Servo Motors (1)
- Side Frame Units (2)
- Special sanding disks (1)
- Spindles (2)
- Straightening Plates (2)
- Tapping Units (2)
- Tension Bolts (1)
- Three-Jaw Power Clamping Chuck (5)
- Tool Cabinets (13)
- Tool Holders (45)
- Tool Trolleys (5)
- Turn-Round Units (2)
- Turning Spindle Units (1)
- Units For Machine Tools (7)
- Vacuum extraction units (5)
- Vibration Pots (2)
- Vices (61)
- Water Chillers (7)
- Welding fume exhaust systems (1)
- Workpiece Conveyors (7)
- more
- A + B (4)
- A+B KREUZTISCH (1)
- Aalenbach (5)
- ABA (1)
- ABB (6)
- ACCRETECH (TOKYO SEI (1)
- ACI LASER (1)
- AFS (1)
- AGIE (1)
- AIGNER (1)
- AKIRA SEIKI (1)
- ALBA (1)
- ALBERTI (1)
- ALIGN (3)
- ALLEN (5)
- ALLMATIC (11)
- ALLWEILER (1)
- AMEC (1)
- AMUTIO-CAZENEUVE (1)
- ANAG (1)
- ARNO (2)
- ARNOLD (2)
- Arnold Müller GmbH (2)
- AROWA (1)
- ARTIS (1)
- ASEA (1)
- ASMUT (1)
- Asquith (5)
- ASSFALG (1)
- ATB (1)
- ATLAS COPCO (1)
- ATLAS-COPCO (1)
- ATMH (1)
- ATS (5)
- AUFSPANNPLATTE (1)
- AUFSPANNSCHEIBE (1)
- Aufspannwinkel (4)
- AUTOWELL (4)
- BANTLEO (1)
- BARLOUT (1)
- BATTENFELD (1)
- BAUER (1)
- BAUMÃœLLER (1)
- BBC (1)
- BECKER (1)
- BECKHOFF (1)
- BEHR (1)
- BEISSBRATH (1)
- BERG (2)
- BERNARDO (2)
- BIAX (1)
- BIELE (1)
- BIGLIA (2)
- BISON (6)
- Black Steel (2)
- Blis (2)
- BMF (1)
- BMS (1)
- BMT (2)
- BOHLE (3)
- BOLEY (1)
- BOMAR (1)
- BONANOMI (1)
- BOSCH (1)
- BREUNING IRCO (1)
- BREUNING-IRCO (1)
- BRIDGEPORT (1)
- BRINKMANN (1)
- BRUDERER (2)
- BSI (1)
- BUECHE (1)
- BW (1)
- BÃœCHE (1)
- BüRENER MASCHINENFABRIK (1)
- BÄR (1)
- C.STIEFELMAYER (1)
- CAPTO (1)
- CARL STAHL (1)
- Carl Zeiss (3)
- Carl Zeiss Jena (2)
- CARMITECH (1)
- CASTROL (1)
- CEKABA (1)
- CEPA PADBERG AS 5 Y (1)
- CHICK (1)
- Chinoise (10)
- CKD (1)
- COLLET + ENGELHARD (1)
- COSMOTEC (2)
- CRYOTHERM (1)
- CYTEC (1)
- D-PML (1)
- D?rr (3)
- DALEX (1)
- DALEX / WAHLENMEIER (1)
- DANAHER (1)
- DANDREA (1)
- DASQUA (1)
- DASSLER (1)
- DEBUS (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 110)
New in: 2004
used
liter capacity: . l0: 5-400 °Ctotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 2004
used
80 x 3800 mm - single-storey warehouse Dimensions 4900 x 750 x 1700h mm - Weight 1440 kg YEAR 2004 ... more information
New in: 2004
used
LNS Quik Load Servo 3 loader Ready for collection Year 2004 Condition Used ... more information
New in: 2004
used
LNS Ecoload Bar feeder (short) Rod diameter 6 - 65 mm Bar length 300 - 1250 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock. ... more information
New in: 2004
used
Rod diameter 5-102 mm Rod length 1600 mm ... more information
New in: 2004
used
LNS Tryton 112 Year of construction: 2004 Hybrid drum: 7/ 12 channels ... more information
New in: 2004
used
Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee ... more information
 (3).jpg)
New in: 2004
used
New in: 2004
used
TEKA extraction system The filter device TEKA - PF/S was used for the extraction of graphite dust. It has been cleaned and is in very good condition. An operating manual is available. ... more information
New in: 2004
used
power capacity: kWtool adaptor: tool taper: HSK-A 100 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2-axis (simultaneous) fork type milling headPower capacity - milling spindle Milling spindle 35 KW from 5000 rpmSpindle speed max. 12000 rpmSwivel range:A axis + / -95 degC axis 360 degNote: Milling head was only a short time in operation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 2004
used
Used Top Loader for 3000 Monoplane Bars Used machine visible in Italy, sold as it is ... more information
New in: 2004
used
TrumaSort R4 Sorting of productions parts in 4 standardized containers ... more information
New in: 2005
used
: 200 mbar: 248 m³/hturning speeds: 950 U/mintotal power requirement: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 2005
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 2005
used
power capacity: 0,18 kWvolt: 400/230 Vampere: 0,6/1,05 Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 2005
used
GANTRY SHEET HANDLING SET Biele Gantry stacker Sheet metal handling set Gantries and stackers for sale High capacity stacker with high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measures of the machinery are: Complete tour of up to 9,100 mm. Width 8,200 mm. Height 2,640 mm. Length of the support 12,000 mm and which in turn has a width of up to 1,100 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measurements of the machinery are: Full travel of up to 8,500 mm. Width 4,500 mm. Height 2,850 mm. Length of the support 4,000 mm and which in turn has a width of up to 1,500 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measureme ...
New in: 2005
used
Spindle circle 165 mm Interface Gildemeister GM 16 AC ... more information
New in: 2005
used
Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg
New in: 2005
used
feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20 ... more information
New in: 2005
used
x-axis: 210 mmy-axis: 300 mmvoltage: 230 Vcurrent: 16 Aweight: 260 kgdimensions of the machine ca.: 1,75x1,0x0,9 m3-axis laser system2 VitroScan 3D scanning systemsLCS-line projector 1200 ANSIallows for the production of three-dimensional face scans (3D portraits of people) and other 3D glass objects, as well as the internal engraving of photographs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.