milling machines used for sale

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

CNC Bearbeitungszentrum Fabrikat: IMA Typ: BIMA Gx50 E 160/630 Baujahr: 2014 - gebraucht, unüberholt, ohne Gewährleistung - Technische Daten: Bearbeitungsbereich X = 6300 mm Y = 1600 mm (max. 2000 mm bei Vertikalbearbeitung mit Hauptspindel und WZ Ø 20 mm) Z = 225 mm inkl. Spannmittel Gewicht ca. 10.500 kg Maschinenbett in schwerer Ausführung. Fahrportal in GANTRY-Bauweise. Spänetransportband Druckluft über Zentralanschluss mit 3/4 Absaugung über Zentralanschluss 250 mm. Einzelabsaugungen schon im Standard mit automatischer Schieberstauerung ausgerüstet. Absauggeschwindigkeit 28 m/s IMA Steuerungssystem ICOS CNC Hauptspindel 18 kW Werkzeug-/Adapterwechselmagazin auf Support-Rückseite mit 18 Plätzen in X-Richtung mitfahrend Werkzeug-/Adapterwechselmagazin auf Support-Rückseite mit 18 Plätzen in Y-Richtung mitfahrend vertikales Bohraggregat mit 21 Spin ...

Tenon mills in perfection A video of the running machine can be sent on request. Program 1: Set-up operation Program 2: Manual milling Program 3: Straight or oblique pins up to 60 degrees with chamfering and starvation Program 4: Flattening, e.g. for corner and ridge blades Precise adjustment options and precise positioning by laser Special milling head with milling ring for plating, chamfering and tenon milling High-torque 6kW motor with automatic motor brake Feed control for hardwood use 3m stop profile with scale Tenon milling at right angles up to approx. 500 x 250mm Ideal machine for carpentry, timber construction, half-timbered houses, carports and pergolas Suction connection 2 x 100mm Protective curtain automatically opening and closing Hood lock Kill switch CE mark Includes instruction manual and comprehensive on-board tools Original paint, only dabbed  ...

Rehnen KBA edge processing machine for grinding, profile milling and profile grinding of edges in one pass Pre-milling unit., processing aggregates: 6, feed: infinitely variable, Connected load: 10 kW, Min. workpiece thickness: about 10 mm, Max. workpiece thickness: approx. 110 mm, Aggregate 1: Pre-milling, Aggregate 2: grind, Aggregate 3: Rounding milling machine above, Aggregate 4: Rounding milling machine below, Aggregate 5: Profile milling machine below, Aggregate 6: Profile grinding below

Description: Electronic Spindle Moulder Serial Number 61.02.003.16 Table 2300 x 450 mm Fixed Speeds: 3500 / 4500 / 6000 / 8000 / 10000 r.p.m Axle Speed 15000 r.p.m. Interchangeable axleserial number: 61.02.003.16, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,700 x 1,700 mm, weight approx.: 750 kg

According to the PDF prospectus!  ... more information

Great for cutting Covid screens, woodworking, plastic fabricators, 2016 only with limited usage, operational and ready to go. All extras; extraction, airbed, software, auto tool changer. Pristine condition. ... more information

Illumina MISEQ SY-410-1003 Last maintenance October 2022 done by Illumina Price is negotiable Illuminas MiSeq uses sequencing by synthesis (SBS) technology: cluster generation+ sequencing+ data analysis in a very short time. Key features: - Automation: Miseq includes a buffer bottle, flow cell and reagent cartridge, enabling both cluster generation and sequencing with unrivalled efficiency. - Time-saving: integrated Real Time Analysis (RTA) software analyzes data in real time during sequencing, saving valuable analysis time. - Applications: Whole genome sequencing (WGS), Exome sequencing (WES), specific sequencing of gene panels of interest, Sequencing and assembly of new genomes, Mitochondrial sequencing, Epigenetics, Metagenomics .../... Fully functional machine to be disconnected in Dec. 2022 Last preventive maintenance by Illumina in October 2022. Dimensions in ...

Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

1. Advanced control system. Mach3 or advanced DSP numerical control system and large liquid crystal display ensure very convenient operation and easier maintenance. The special intelligent precalculation system fully develops the potential of the motor and allows you to quickly process smoother curves and straight lines at the same time. 2. Large memory and good data transmission. The large internal memory of 32M is enough to store more than 30 processing files at the same time, which can be freely read. Adopt USB interface (plug and play) to communicate with win98 / NT / 2000 / XP system computer, which can finish the transmission immediately. 3. Powerful compatibility. The internationalized directives guarantee compatibility with CAD / CAM software such as type3 / artcam / castmate / proe / UG / Artcut etc. at home and abroad. 4. Intelligent and humanized design. Intelligent sp ...

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS ... more information

Hello cause renewal of machine park, we are selling a DARREL brand digital milling table purchased in 2017. The sale is URGENT, because we do not have the space to keep it and therefore have to sell it quickly. Ideal CNC machine for cutting Plexiglas, aluminum composite, wood, PVC, flexible materials 3000x1500mm plate New ELTE 2.2kw spindle (changed 1 month ago) New pads (changed 10 days ago) New variator (changed 10 days ago) 1 month old) In perfect working order, fully serviced. Intuitive software included Clamping flange on the periphery of the plate to block the materials Suction turbine Nose + Chip extractor Dies and cutters provided Demo possible by appointment Price negotiable To pick up in Marseille

Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger  ... more information

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Stop adjustment: manual; Height indicator: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron constructionDynamically balanced milling unit anchored to the work tableParticularly robust constructionSmooth running thanks to precision units and high dead weightStandard with clockwise-counterclockwise rotation and electronic locking when changing direction5 Speeds from 3000 - 10000 min ̄¹Speed change is easy and convenient from the machine sideStandard with MK 4 interc ...

used Vertical CNC machining center, 3 axes Brand: Biesse Type: Skipper V31 Year: 2018 only a few hours of use vertical working, feed through collet chuck Equipment machining head: - milling spindle 4,5 kW, ISO 30 - 10 individually callable vertical + 6 horizontal spindles - grooving saw Ø with 120 mm working area: 3200x900mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

3-axis CNC Motor for milling 10kw 1000 to 24000 rpm 8 slot drilling head 2 vacuum motors of 500m3 (10kw) each x3090 Y 2100 Z85 15 automatic change tool holders Automatic lubrication Laser security system Perfect condition less than 300 hours of operation (new) Production year 2018 ... more information

Yaskawa Robot Motoman MH180 7 axis, with a 16.6 m rail and table thta we are going to sell now 2018 ABB Kuka Yaskawa  ... more information

3 Engines 18 000 rpm 2.2 kW 10 A 6-8 bar  ... more information