gear cutting and hobbing machines used for sale

Klingelnberg PFS600 Gear tester  ... more information

MAHR GMX 275 CNC GEAR TESTING MACHINE  ... more information

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 Modulmin. module: 1 Control: Siemens 840 D PowerLinetable diameter: 1200 mmtable load: 15 ttotal power requirement: kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5 x 4 x 3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical andworm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine withcounter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3 - Special speed series motorised milling head M3- Extended software for fault diagnosis - Main stand - raised 1000mm- Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor- Set of adjustable wedges - Dia ...

max. wheel diameter: 1200 mmgear width: 350 mmmax. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mmtable diameter: 1200 mmtable hole: 300 mmcontrol: Siemens 840D Powerlinetotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 5x3x3,8 mGleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process.Special version with hydraulic shaping head H1SCOPE OF EQUIPMENT:- Basic machine P1200S, Siemens 840D Powerline (XP)- Hydraulic shaping head H1- Signal light (3-colour)- Extended software for fault diagnosis- Telephone diagnosis system- Chip disposal through table bore- Set of adjus ...

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. workpiece diameter: 250 mmthreading length: 800 mmmax. module: 8 min. module: 1 total power requirement: 10 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3,05x1,75x1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 400 mmgear width: 250 mmmax. module: 8 min. module: 0,5 root circle diameter: 10 mmnumber of teeth: 5 - 999 max.helical angle: +/- 45 °weight: 12.5 tcontrol: Siemens 840 DMachine is in very good condition, test reports available.CNC Siemens 840 DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...

Gear hobbing machine 4000 mm Module 13 282  ... more information

cone distance (outside): 645 mmmax. gear pitch diameter: 650 mmnumber of teeth: 999 total power requirement: 99 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3 x 3 x 4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mAccessories:Change gearsMilling arborsOperating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D  ... more information

Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m  ... more information

Workpiece dimensions: 360 mmmax. workpiece diameter: 360 mmmodule: 8 mmx-travel: 400 mmy-travel: 240 mmz-travel: 360 mmmilling head -swivable +/-: 45 °diameter of hob: max. 175 mmmilling spindle turning speed range:: 75-600 U/min.: 40 KVAcontrol: 840C Siemensdimensions of the machine ca.: 3,10 x 2,40 x 2,70 mweight: 9 ttotal power requirement: 25 kWwork piece revolutions: zweigänig 0,2-60 U/mincounter-stay slide: 450 mm VerfahrwegSiemens Sinumerik 880 M - controlpartial gearbox double threaded, automatic workpiece feeding, conversational programmVideo link:https://www.youtube.com/watch?v=GkQs8lfeNYkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 275 mmgear width: 275 mmmax. module: 6 weight of the machine ca.: 5,3 tshifting: 100 mmdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...

BEVEL GEAR SPIRAL GENERATOR  ... more information

3 x heads , change gears  ... more information

Ref. -No.: 10103Manufacturer: MAAGYear of construction: 1976Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SchweizMinimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mmMax. Pile driving: 225 mmMax. Wheel Diameter: 750 mmMin. Wheel Diameter: 30 mmTable Diameter: 500 mmMax. Module: 10 mmMin. Module: 1 mmSpiral Angle: 0/60 °