- (43)
- Automatic Drillers (28)
- Automatic thread drills (1)
- Battery powered drilling machines (6)
- Bench Type Drilling Machines (59)
- Boring Mills (59)
- Centre Drilling Machines (2)
- CNC Boring Mills (25)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (190)
- Contracting Pods Panel Drills (8)
- Core hole drills (1)
- Core-drilling machines (1)
- Deep Hole Drilling Machines (42)
- Drilling And Milling Machines (34)
- Drilling Centres (4)
- Drilling Machines (79)
- Fine Boring Machines (1)
- Gang Drilling Machines (21)
- Hand drills (54)
- High Performance Drilling Machines (4)
- High Speed Drilling Centres (HSC) (1)
- High Speed Machining Centres (HSC) (5)
- High Speed Radial Borers (14)
- Horizontal Boring And Milling Centres For Cubical Workpieces (3)
- Horizontal Numerically Controlled Machining Centres (52)
- Horizontal Processing Centers (41)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (4)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (2)
- Milling machine centers (8)
- Milling machining centres (4)
- Multi Spindle Drilling Machines (32)
- Multiway Drilling And Boring Machines (2)
- Numerically Controlled Machining Centres (317)
- Other Drilling And Boring Machines (9)
- Other Machining Centres (7)
- Panel Drills (12)
- Pillar-Type Drilling Machines (67)
- Portal machining centres (8)
- Precision drilling machine (1)
- Processing Centers (157)
- Profile processing centres (2)
- Radial Drilling Machines (94)
- Round Turntables (5)
- Slotted hole drill presses (1)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (1)
- Table Drills (62)
- Tapping Machines (31)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (10)
- Universal mills (1)
- Universal processing centres (59)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (164)
- Vertical Processing Centers (118)
- Vices For Machines (83)
- more
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (27)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AFD (1)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (3)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (127)
- AMADA (1)
- ANAYAK (2)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNO (2)
- ASDORF (1)
- ASQUITH (1)
- ATOLL (1)
- AUDAX (1)
- Auerbach (4)
- Avia (5)
- Awea (9)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (19)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLEY (1)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BRAGONZI (1)
- BREDA (5)
- BREVETTI MOTTA (1)
- BRIDGEPORT (17)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BRONSWERK (1)
- BROTHER (14)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- BWF (1)
- BÖHRER (2)
- C.B. Ferrari (2)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 101)
New in: 2002
used
X-travel: 1200mm, y-travel: 800mm, z-travel: 700mm, max. load: 1.5t, rotational speed: 1-14,000/min, operational hours counter controls/ machine/ spindle: 41,351/ 133,865/ 60,163h. The Z-axis hums after switching on. ... more information
New in: 1997
used
Travel XYZ: 3500/1000/750, 3-axis, speed range: 15000 rpm, tool magazine/tool holder: 40/SK40, control: Heidenhain TNC 426, chip conveyor: scraper belt conveyor. The machine is fully functional and can be inspected on site during operation. ... more information
New in: 2015
used
Control: Sinumetrik 840D sl, operating hours: 41634h, spindle running time: 19155h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Chip conveyor: KNOLL 800 K-1, cooling lubricant preparation, cooling unit: Lahntechnik LM 220-32.
New in: 2016
used
Traversal X/Y/Z: 670/820/600mm, swivel range: +/- 120°, tool storage: 120 places. Table load: 1,200kg, spindle speed: 18.00 n/m, rotary table: Ø 800mm, endless 360 degree rotation. Tool holder: HSK 63, Max. Weight tools: 8kg, Pneumatic: 6bar, Control: Heidenhain TNC 640. Machine hours: 12,400h, Spindle running time: 2,340h, Options available: IKZ variable, variety of HSK fixtures as good as new. Dimensions length/width/height: 4150mm/5000mm/3500mm, weight: 20 tons
New in: 2016
used
Control: Sinumetrik 840D sl, operating hours: 41528h, spindle running time: 25436h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Coolant preparation: Knoll.
New in: 1980
used
Max. Drilling diameter: 35 mm, Distance from spindle axis to column: 300 mm, Max. Spindle stroke: 250 mm, Max. Through-feed drill head: 170 mm. Table top dimensions: 450x500 mm, Number of spindle speeds: 12 from 31.5 - 1400 rpm, Overall machine dimensions: 1030Ñ…835Ñ…2535 mm, Weight: 1200 kg. On-site inspection is possible.
used
max. drilling capacity: steel: 75mm, cast iron: 90mm, spindle speed: 19-1900rpm, vertical arm movement: 950mm, horizontal arm movement: 2000mm, max. spindle movement on the arm: 380mm. Dimensions X/Y/Z: 3220mm x 1130mm x 3400mm, weight: approx. 7000kg. ... more information
New in: 2002
used
A 3-axis horizontal machining center with approx. 150 additional tools. Tool magazine SK40: 61 places. Travel X/Y/Z: 600mm/580mm/580mm, max. tool size: 400mm x 400mm, max. tool weight: 400kg. Power: 35-12000rpm, rapid traverse X/Y/Z: 50m/min, feed speed: 1-50000mm/min. Dimensions X/Y/Z: approx. 4000mm/3700mm/2900mm, weight: approx. 400kg. Operating time: 73,974h, machining time: 25,714h, machining cutting hours: 21,591h. Cabinets for tools can also be handed in. Documentation available.
used
Travel X/Y/Z: 630mm/560mm/560mm, tool holder: SK40, max. speed range: 12000rpm, table size X/Y: 1000mm/600mm, groove spacing: 63mm, number of grooves: 9/14H7, max. table load: 500kg, table weight: 400kg. Control: Heidenhain MillPlus (V41X), weight: 6500kg, weight of cooling lubricant system: 1000kg. Including chip conveyor, control panel and manual control panel, AC servo motor. Documentation available. On-site inspection is possible.
New in: 1997
used
Control: MSC-501, number of axes: 3, table size X/Y: 1100mm/600mm, max. table load: 1000kg. Travel X/Y/Z: 1000mm/500mm/500mm, rapid traverse X/Y/Z: 3200mm/min, spindle taper: CAT 40, spindle speed: 10000rpm, tool changer capacity: 30. Operating hours: 48448h, spindle hours: 30465. Machine still in operation, operating and spindle hours are subject to change.
New in: 1957
used
Speed: 1000 rpm, weight: 2400 kg. On-site viewing is possible. ... more information
used
Table size X/Y: 900mm/1400mm, control: CNC H 646, travel X/Y/Z/W: 1120mm/710mm/315mm/630mm, spindle diameter: 125mm, spindle speed: 2240rpm, max. table load: 1000kg, dimensions X/Y/Z: 4000mm/2460mm/3030mm, weight: 8800kg. On-site inspection is possible. ... more information
New in: 2006
used
Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. ... more information
New in: 2001
used
CONTROLS CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 850 mm Y-axis travel: 600 mm Z-axis travel: 560 mmTABLE table surface (left-right): 1100 mm table surface (front-back): 510 mm workpiece load (max): 750 kgSPINDLE / HEAD spindle revolutions (max): 8000 /minAXIS DRIVES rapid traverse X: 24000 mm/min rapid traverse Y: 24000 mm/min rapid traverse Z: 20000 mm/minTOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2450 mm space requirements -front/back-: 2400 mm total height: 2815 mm total weight approx ...
New in: 2005
used
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm rotating range B-axis from: -115 ° rotating range B-axis up to: 30 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 °TABLE clamping surface diameter: 450 mm workpiece load (max): 200 kgSPINDLE / HEAD spindle revolutions (max): 20000 /min tool fixture: HSK A63 TOOL MAGAZINE number of positions: 120 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7700 kgATTACHMENTS workpiece sensor: yes chip conveyor: yes coolant unit: yes band filtration uni ...
New in: 2005
used
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm rotating range B-axis from: -115 ° rotating range B-axis up to: 30 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 °TABLE clamping surface diameter: 450 mm workpiece load (max): 200 kgSPINDLE / HEAD spindle revolutions (max): 20000 /minAXIS DRIVES rapid traverse X: 22000 mm/minTOOL MAGAZINE number of positions: 220 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4400 mm space requirements -front/back-: ...
New in: 1988
used
CONTROLS NC controls WORKING RANGE - BORING drilling capacity full bore (steel): 40 mm throat (max): 800 mmSPINDLE / HEAD spindle revolutions (min): 335 /min spindle revolutions (max): 1800 /min number of gears: 2 tool fixture: MK 4 TECHNICAL SPECIFICATION table surface (left-right): 1000 mm table surface (front-back): 500 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front/back-: 1250 mm total height: 2500 mm- 9`600h operating hours- div. tool holders, - coolant system- with cube table
New in: 2016
used
CONTROLS CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 640 mm Y-axis travel: 250 mm Z-axis travel: 400 mm rotating range B-axis from: 105 ° rotating range B-axis up to: -105 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° distance spindle nose - table surface (max.): 450 mmTABLE workpiece load (max): 60 kgSPINDLE / HEAD spindle revolutions (max): 42000 /minTOOL MAGAZINE number of positions: 90 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2400 mm space requirements -front/back-: 2370 mm total height: 30 ...
used
Spare parts (spindles) for Starrag machine ZT 800 / ZT 10002x Ø310x800mm (150mm x Ø128.5mm) 1x Ø310x1000mm (340mm x Ø128.5mm)Various ball screws to Starrag- partly new ground - partly new (unused) ... more information
New in: 1998
used
CONTROLS CNC controls HEIDENHAIN TNC 426 PB WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 610 mmTABLE table surface (left-right): 920 mm table surface (front-back): 380 mmSPINDLE / HEAD spindle revolutions (max): 18000 /min