- (2)
- Injection molding machines (416)
- Injection molding machines for rubber (1)
- Injection moulding devices (3)
- Injection moulding tools (4)
- Injection moulding tools for plastics (3)
- Machines used for injection moulding (6)
- Multi component injection moulding machines (11)
- PET Machines (16)
- PET Preforming machines (11)
- Plastic injection machines (157)
- Precision injection molding machines (3)
- Special injection moulding machines (6)
- Withdrawal devices (1)
- more
- ABB (1)
- ACOPOS (1)
- AMADA (1)
- Arburg (339)
- ARBURG 320C UNIVERSAL (1)
- ARBURG 320T (1)
- ARBURG 370 (1)
- ARBURG ALLROUNDER 920H (1)
- ASIAN PLASTIC MACHINERY (1)
- Asian Plastics Machinery (3)
- Battenfeld (105)
- BATTENFELD BCT (1)
- BEYELER (1)
- BILLION (21)
- BM BIRAGHI (1)
- BM-BIRAGHI (1)
- BMB (15)
- BMB COSTRUZIONI OLEOMECCANICHE (1)
- Borche (4)
- Borel (2)
- Boy (25)
- BUCHER GUYER (1)
- BUSCH (1)
- CINCINNATI (1)
- CMEC-HY (1)
- CRONOPLAST (1)
- Demag (158)
- Demag Ergotech (15)
- DEMAG EXTRA (1)
- Desma (2)
- Dr. Boy (17)
- DR.BOY (1)
- EKOU INDUSTRIES CO. (1)
- ELWIK (2)
- Engel (196)
- ENGEL 3550/700 DUO (1)
- ENGEL 3550/800 DUO (1)
- ENGEL 4550/700 DUO (1)
- ERLHOFF (1)
- EVERPLAST MACHINERY (1)
- FANUC (1)
- FANUG (1)
- FCS (3)
- Ferromatik (28)
- FERROMATIK DESMA (1)
- Ferromatik Milacron (20)
- FOSTAG (1)
- FUCHUN SHIN MACHINERY MANUFACTURE CO., (1)
- GBF (1)
- Haitian (13)
- HEATMASTERS (1)
- HPM (2)
- HRS (1)
- HSI (1)
- HT MIR (1)
- HTW (1)
- HURMAK (1)
- HUSKY (31)
- HUSKY HMI (1)
- HUSKY HUAYAN (2)
- Husky Injection Systems (2)
- INTEC-OTTOGALLI (1)
- INTRON (1)
- Italtech (4)
- JSW (11)
- KLOECKNER DESMA (1)
- Krauss Maffei (159)
- KRAUSS MAFFEI (2K) (1)
- KRAUSS-MAFFEI (4)
- KraussMaffei (8)
- LEADWAY (1)
- LG (1)
- LGH (1)
- LS (3)
- LS Machinery (4)
- LS MITRON (1)
- LS MTRON (1)
- LWB STEINL (1)
- MAINGROUP (2)
- MANNESMANN DEMAG (1)
- Maplan (2)
- MATSUI (1)
- MECCAPLASTICA (1)
- METALMECCANICA-PLAST (1)
- MILACRON (2)
- MITSUBISHI (1)
- NEGRI BOSSI (29)
- NEGRI BOSSI EOS (1)
- NEGRI BOSSI SACMI (1)
- NEGRI-BOSSI (1)
- NegriBossi (2)
- Netstal (35)
- NETSTAL 550T (1)
- NETSTAL-MASCHINEN (1)
- Nissei (2)
- NPM (1)
- OIMA (1)
- OZYILMAZ(TURKISH) (1)
- PLASTAK ENGINEERING (1)
- PM (2)
- ... more
Manufacturer:
(Category: 301)
New in: 2007
used
Hydraulic operating pressure: 275bar, weight: 4.1t. ... more information
New in: 1995
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t. ... more information
New in: 2001
used
Connected load: 42kW. ... more information
New in: 2016
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible. ... more information
New in: 1999
used
Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power. ... more information
New in: 1997
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible. ... more information
New in: 1991
used
There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible. ... more information
New in: 2018
used
Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.
New in: 1986
used
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
New in: 2004
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. ... more information
New in: 2002
used
Weight: 9.1t, the machine is leaking and the control card is missing. ... more information
New in: 1998
used
Operational hours counter: 59,129h, with Handling PSA 2080. ... more information
New in: 1998
used
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h. ... more information
New in: 2006
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible. ... more information
New in: 2006
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible. ... more information
New in: 2004
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible. ... more information
New in: 2008
used
Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible. ... more information
New in: 2000
used
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h. ... more information
New in: 2007
used
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories. ... more information
New in: 2011
used
Operational hours counter: 62,699h, with documentation, without accessories. ... more information