- (60)
- Automatic Drillers (28)
- Automatic thread drills (1)
- Battery powered drilling machines (6)
- Bench Type Drilling Machines (58)
- Boring Mills (54)
- Centre Drilling Machines (2)
- CNC Boring Mills (24)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (185)
- Contracting Pods Panel Drills (8)
- Core hole drills (1)
- Core-drilling machines (1)
- Deep Hole Drilling Machines (43)
- Drilling And Milling Machines (34)
- Drilling Centres (4)
- Drilling Machines (65)
- Fine Boring Machines (1)
- Gang Drilling Machines (20)
- Hand drills (71)
- High Performance Drilling Machines (4)
- High Speed Drilling Centres (HSC) (1)
- High Speed Machining Centres (HSC) (5)
- High Speed Radial Borers (15)
- Horizontal Boring And Milling Centres For Cubical Workpieces (3)
- Horizontal Numerically Controlled Machining Centres (53)
- Horizontal Processing Centers (44)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (4)
- Jig boring machines (17)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (2)
- Milling machine centers (9)
- Milling machining centres (5)
- Multi Spindle Drilling Machines (32)
- Multiway Drilling And Boring Machines (2)
- Numerically Controlled Machining Centres (313)
- Other Drilling And Boring Machines (9)
- Other Machining Centres (12)
- Panel Drills (12)
- Pillar-Type Drilling Machines (58)
- Portal machining centres (9)
- Precision drilling machine (1)
- Processing Centers (161)
- Profile processing centres (2)
- Radial Drilling Machines (92)
- Round Turntables (5)
- Slotted hole drill presses (1)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (1)
- Table Drills (60)
- Tapping Machines (31)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (10)
- Universal mills (1)
- Universal processing centres (64)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (153)
- Vertical Processing Centers (124)
- Vices For Machines (52)
- more
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (24)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (2)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESA MONTI (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (123)
- AMADA (1)
- AMCO (1)
- ANAYAK (1)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNOLD (1)
- ASDORF (1)
- ATLAS COPO (1)
- ATOLL (1)
- ATORN (1)
- AUDAX (1)
- Auerbach (5)
- Avia (4)
- Awea (10)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- AYERBE (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (18)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BOSCH (3)
- BRAGONZI (1)
- BREDA (6)
- BREVETTI MOTTA (1)
- BRIDGEPORT (16)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BROTHER (16)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- BWF (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 101)
used
New in: 2004
used
New in: 1998
used
x-travel:500 mmy-travel:300 mmz-travel:350 mmweight of the machine ca.:5,7 tdimensions of the machine ca.:286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) mtool magazin::36 tool taper:SK40 turning speed range:0-9000 U/minmain drive motor:18 kW2 Pallet Changer 500 mm x 300 mmincl. 4. axis , fixed on first palletincl. filter mist model AFS 600incl. BLUM tool setterincl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilterincl. chipconveyerincl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc.Miscellaneous: Machining is possible on the device bridge or the rotary swivel device.Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON )
New in: 2012
used
x-travel:1300 mmy-travel:610 mmz-travel:810 mmtable surface area:1.450 x 610 mmrapid traverse X- and Y-axis:30 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:15.000 1/minmax. torque on the spindle:120 / 48 Nmspindle:18 / 15 kWtool change unit:60 Pos.CNC-control:HEIDENHAIN iTNC 530 weight of the machine ca.:6,8 ttotal power requirement:40 kVAdimensions of the machine ca.:3,45 x 2,6 x 2,75 m5-axis simultaneously-machining center,NC-rotary table D 500mm,controlled milling head (B-axis) +-120°,internal coolant supply 20bar, paper filter,3D-touchprobe RENISHAW,direct measuring system,chipconveyor,approx. 41.500 h "machine on", approx. 15.500 h "spindle on (total)" , last spindle around 4.000 h
used
7.500 € Quality unchecked. Please note! Pick-up is only possible by appointment! Dimensions: Machine: Length: 4500mm Width: 2760mm Height: 2850mm Weight: 15000kg Oil tank: Length: 1200mm Width: 920mm Height: 1500mm Weight: 150kg Chip conveyor Length: 3600mm Width: 1000mm Height: 1450mm Weight: 250kg Transformer: Length: 1150mm Width: 520mm Height: 1250mm Weight: 100kg Pallet: Length: 800mm Width: 600mm Height: 300mm Weight: 50kg
used
New in: 2003
used
x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,
New in: 2018
used
SMTCL Ä°5M4 CNC Vertical Machining Center 3 axis X : 1000 mm Y : 610 mm Z : 650 mm Spindle speed : 10 000 rpm Machine is in excellent condition ... more information
New in: 2007
used
HEIDENHAIN TNC 530 CNC X axis (strokes) 650 Y axis (strokes) 600 Z axis (strokes) 500 C axis (table rotation) 360,000 Spindle power Kw 15 kw Spindle speed (main spindle) 18,000 Maximum warehouse capacity 32 Spindle connection (spindle) Din 69871 Renishaw system predisposition Air blow through dry machining spindle yes Chip conveyor yes 5 axis continuous package yes
used
10 € Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap
New in: 1987
used
Work spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest spring extension 1,600 mm Spindle speed in the range of 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min Milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Thread: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL TO STAND 4,000 mm TRAVEL OF THE STAND ON THE BED 5,000 mm BASE PLATE DIMENSIONS 6,400 x 5,100 mm
New in: 2001
used
x-travel:630 mmy-travel:500 mmz-travel:500 mmtable-size:800 x 500 mmspindle taper ISO:40 turning speed range:0 - 10.000 U/minfeeds longditudinal/cross/vertical:1 - 30000 mm/minrapid motion -longitudinal/cross/vertical:30 m/minno. of tools in magazin:24 workpiece diameter at full load:80 mmwotkpiece diameter with 2 vacant positions:140 mmworkpiece length:300 mmweight of tools max.:7 kgtable load:500 kgspindle drive:9 / 11 kWcontrol:SINUMERIK 810D total power requirement:30 kVAweight of the machine ca.:4,2 tvertical machining center,el. handwheel,ShopMill,direct measuring system,3D-touchprobe RENISHAW MP 10 ,laser,internal coolant supply,mode 4,airblast,chipconveyor,approx. 42.500 hours on hour meter
used
New in: 2022
used
Polycarbonate (PC) box and lid Sterilizable Human DNA/RNase/DNase – certified free Sold by 10 units Compatible with pipettes: Watson nexty: 20 – 200ul (M)/200ul (F), Eppendorf Reference/research: 50 (20) -200ul, Gilson pipetman: P-200, finnpipette digital: 20 – 200ul, Biohit Proline: 20 -200ul, Nichiryo Nichipet EX: 20-200ul/40-200ul (M)
used
New in: 1979
used
Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.
New in: 1997
used
The machine is in good technical condition, after agreement possibility of inspection in running. Heidenhain control system X axis = 1016mm Y axis = 610mm Z axis = 508mm Table load: 600kg Number of tools in magazine: 40 Dimensions L x W x H: 3280 x 2260 x 2400mm Weight: 6000kg ... more information
used
55 € Unused, manual available ... more information
New in: 1998
used
The four-axis horizontal machining center is designed for milling, boring, hole drilling and threading in the manufacture of complex parts from various metals and alloys in batch production. The machine is equipped with an automatic tool changer with a magazine for 62 positions, an automatic pallet changer Partially disassembled.
used
100 € Equipped with: T slot clamping block size: 1020x760x500 LxWxH in mm, ... more information