- (8)
- Automatic Drillers (28)
- Automatic thread drills (1)
- Battery powered drilling machines (6)
- Bench Type Drilling Machines (59)
- Boring Mills (54)
- Centre Drilling Machines (2)
- CNC Boring Mills (24)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (184)
- Contracting Pods Panel Drills (8)
- Core hole drills (1)
- Core-drilling machines (1)
- Deep Hole Drilling Machines (44)
- Drilling And Milling Machines (34)
- Drilling Centres (4)
- Drilling Machines (65)
- Fine Boring Machines (1)
- Gang Drilling Machines (20)
- Hand drills (71)
- High Performance Drilling Machines (4)
- High Speed Drilling Centres (HSC) (1)
- High Speed Machining Centres (HSC) (5)
- High Speed Radial Borers (13)
- Horizontal Boring And Milling Centres For Cubical Workpieces (3)
- Horizontal Numerically Controlled Machining Centres (62)
- Horizontal Processing Centers (43)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (4)
- Jig boring machines (17)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (2)
- Milling machine centers (9)
- Milling machining centres (5)
- Multi Spindle Drilling Machines (32)
- Multiway Drilling And Boring Machines (2)
- Numerically Controlled Machining Centres (315)
- Other Drilling And Boring Machines (9)
- Other Machining Centres (9)
- Panel Drills (12)
- Pillar-Type Drilling Machines (57)
- Portal machining centres (8)
- Precision drilling machine (1)
- Processing Centers (161)
- Profile processing centres (2)
- Radial Drilling Machines (92)
- Round Turntables (5)
- Slotted hole drill presses (1)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (1)
- Table Drills (62)
- Tapping Machines (31)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (10)
- Universal mills (1)
- Universal processing centres (66)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (165)
- Vertical Processing Centers (124)
- Vices For Machines (57)
- more
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (24)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (2)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (123)
- AMADA (1)
- AMCO (1)
- ANAYAK (2)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNOLD (1)
- ASDORF (1)
- ATOLL (1)
- ATORN (1)
- AUDAX (1)
- Auerbach (5)
- Avia (4)
- Awea (10)
- AXA (18)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (18)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BOSCH (3)
- BRAGONZI (1)
- BREDA (6)
- BREVETTI MOTTA (1)
- BRIDGEPORT (16)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BROTHER (16)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- BWF (1)
- C.B. Ferrari (2)
- C.B.FERRARI (3)
- C.M.S (1)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 101)
New in: 1999
used
X-travel: 1600mm, y-travel: 400mm, z-travel: 350mm, max. rotational speed: 10,500/min, rapid traverse: 45m/min, feed rate: 1-10,000mm/min, connected load: 46kVA, controls: Siemens 840D, with documentation, optionally there are one automation and one counter bearing to the fourth axis available. ... more information
New in: 1989
used
X-travel: 800mm, y-travel: 630mm, z-travel: 630mm, controls: uni-Pro NC 80-C, length: 5600mm, width: 4200mm, height: 3600mm, weight: 12t, operational hours counter: 88,356h, with documentation. ... more information
New in: 1999
used
Compressed air supply: 6-8bar, with documentation, without accessories, was maintained regularly, the machine is not functional, the software is defective. ... more information
New in: 2012
used
There are two identical machining centers available, table dimensions: 850x530mm, number of tool slots: 48, controls: Heidenhain iTNC 530, operational hours counter machine 1/2: 37,800/36,900h, with tool magazine and documentation. ... more information
New in: 1990
used
X-travel: 4100mm, y-travel: 650mm, z-travel: 500mm, clamping table dimensions: 4600x710mm, table height: 840mm, controls: SIEMENS SINUMERIK, length: 7200mm, width: 3800mm, height: 3000mm, weight: 10.5t, with chip conveyor and documentation. ... more information
New in: 1992
used
Length: 800mm, width: 600mm, height: 2000mm, weight: 825kg. ... more information
New in: 2012
used
X1-travel: 1280mm, x2-travel: 960mm, z-travel: 180mm, spindle mount: HS 32, max. rotational speed: 6000/min, length: 4500mm, width: 5000mm, operational hours: ca. 15,000h, suitable for turning, knurling, thread cutting, smoothing, eddy current testing, with two rotary axes, feed for shafts via step conveyor and feed-through chuck Ø42, discharge belt with sorting, emulsion preparation, chip discharge belt and double extraction with separator, was maintained regularly.
New in: 1989
used
X-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, table dimensions: 2300x570mm, table height: 900mm, connected load: 36kVA, length: 4100mm, width: 3300mm, height: 2900mm, weight: 7t, operational hours counter: 62,437h, with documentation, was maintained regularly. ... more information
New in: 2015
used
Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h. ... more information
New in: 2007
used
X-axis: 1050mm, y-axis: 560mm, z-axis: 520mm, table dimensions: 1200x515mm, max. workpiece weight: 800kg, tool holder: SK40 DIN 69871 / HSK A63, control: Heidenhain iTNC 530, with documentation, an inspection is possible. ... more information
used
X-travel: 300mm, y-travel: 220mm, z-travel: 200mm, max. rotational speed: 6000/min, table dimensions: 500x220mm, connected load: 6kVA, weight: 1.3t, operational hours counter: 6807h, including various tool cones. ... more information
New in: 1977
used
Distance between the columns: 1700mm, table dimensions: 1000x1180mmm, max. load: 3t, length: 2600mm, width: 1900mm, height: 2660mm, weight: 10t, including documentation. ... more information
New in: 1994
used
Max. spindle rotational speed: 15,000/min, controls: Dialog 112, tool changer and cooling lubricant transfer tube are defective, including fourth axis. ... more information
used
used
New in: 1989
used
X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible. ... more information
New in: 1993
used
X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible. ... more information
New in: 2000
used
X-travel: 600mm, y-travel: 450mm, z-travel: 450mm, table dimensions: 800x450mm, max. rotational speed: 16,000/min, rapid traverse: 35,000mm/min, controls: HEIDENHAIN TNC 430M, connected load: 30kVA, length: 2150mm, width: 2360mm, height: 2700mm, weight: 6.5t, operational hours counter controls/ machine/ spindle: 44,884/ 44,079/ 12,762h.
New in: 2001
used
X-travel: 1200mm, y-travel: 1100mm, z-travel: 1100mm, max. rotational spindle speed: 12,000/min, connected load: 34kW, controls: SIEMENS SINUMERIK 840 D with Shop Mill package, including documentation, B-axis, 70bar high-pressure internal coolant supply, tool holder SK50, BIG PLUS according to ISO 7388/2-A standard, tool changer with 100 tools, pallet changer APC, two pallets 800x800mm with T-slots and reference hole, air filter Losma, chip conveyor and cooling unit. Air filter Losma, chip conveyor and cooling unit, retrofit 2016.
New in: 1959
used
There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible. ... more information