- (54)
- Automatic Drillers (28)
- Automatic thread drills (1)
- Battery powered drilling machines (6)
- Bench Type Drilling Machines (58)
- Boring Mills (59)
- Centre Drilling Machines (2)
- CNC Boring Mills (25)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (190)
- Contracting Pods Panel Drills (8)
- Core hole drills (1)
- Core-drilling machines (1)
- Deep Hole Drilling Machines (42)
- Drilling And Milling Machines (34)
- Drilling Centres (4)
- Drilling Machines (79)
- Fine Boring Machines (1)
- Gang Drilling Machines (20)
- Hand drills (54)
- High Performance Drilling Machines (4)
- High Speed Drilling Centres (HSC) (1)
- High Speed Machining Centres (HSC) (5)
- High Speed Radial Borers (15)
- Horizontal Boring And Milling Centres For Cubical Workpieces (3)
- Horizontal Numerically Controlled Machining Centres (53)
- Horizontal Processing Centers (42)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (4)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (2)
- Milling machine centers (8)
- Milling machining centres (4)
- Multi Spindle Drilling Machines (32)
- Multiway Drilling And Boring Machines (2)
- Numerically Controlled Machining Centres (317)
- Other Drilling And Boring Machines (10)
- Other Machining Centres (7)
- Panel Drills (13)
- Pillar-Type Drilling Machines (67)
- Portal machining centres (8)
- Precision drilling machine (1)
- Processing Centers (159)
- Profile processing centres (2)
- Radial Drilling Machines (93)
- Round Turntables (5)
- Slotted hole drill presses (1)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (1)
- Table Drills (63)
- Tapping Machines (31)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (10)
- Universal mills (1)
- Universal processing centres (67)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (165)
- Vertical Processing Centers (120)
- Vices For Machines (84)
- more
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (27)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AFD (1)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (3)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (127)
- AMADA (1)
- ANAYAK (2)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNO (2)
- ASDORF (1)
- ASQUITH (1)
- ATOLL (1)
- AUDAX (1)
- Auerbach (4)
- Avia (5)
- Awea (9)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (19)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLEY (1)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BRAGONZI (1)
- BREDA (5)
- BREVETTI MOTTA (1)
- BRIDGEPORT (17)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BRONSWERK (1)
- BROTHER (14)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- BWF (1)
- BÖHRER (2)
- C.B. Ferrari (2)
- ... more
subcategories
(3rd category level)
Manufacturer:
(Category: 101)
New in: 2011
used
x-travel:730 mmy-travel:850 mmz-travel:1100 mmcontrol:MSX 711 MAPPS IV Spindle power:22 / 18,5 kWSpindle RPM:12000 1/minTool magazine:120 HSK-A 63 max. tool diameter:70 mmMax. Tool dia with free space next in magazine:140 mmmax. tool length:480 mmmax. tool weight:12 kgrapid travel x/y/z:50.000 mm/minA-axis (5th axis) pivoting table:+30° -120° °Rapid Rpm B-axis (rotary table):50 1/minRapid feed A-axis (tilt axis):20 1/minPallet changer 2x:500 x 500 mmmax. workpiece weight:500 kgworkpiece - installed height:700 mmmax. workpiece diameter on pallets:700 mmtotal power requirement:63 kVAweight of the machine ca.:21 tdimensions of the machine ca.:6,0 x 6,1 x 3,3 mNumber of coordinate systems:300 Memory:1 MB Registered Programs:1000 Coolant through spindle 50 bar with filter:Frascara Fast state of the art 5-axis machining center with twin 500mm pallet changer, full A- and B-axis, high pres ...
New in: 2006
used
x-travel:550 mmy-travel:400 mmz-travel:360 mmcontrol:Siemens Shopmill 840 DTilting Axis A Angle:± 100 °table surface area:Ø 280 mmSpindle RPM:20-12000 1/minspindle drive:9,5 / 14 kWSpindle Torque:90 Nmrapid travel x/y/z:60 mm/mintool magazin::48 HSK-A63 tool diameter:82 (125) mmweight of tools max.:5 kgTool change time tool/tool, milling spindle:2,4 stotal power requirement:15 kWweight of the machine ca.:8,2 tDimensions (L/W/H):3,8 x 4,1 x 3,3 mminternal coolant system feed:10/20/30/40/50/60/70 barMotoman robot:NX 100 This is a well maintained vertical 5-axis machining center with coolant through spindle 10-70 bar.Motoman Robot for parts loading
New in: 2007
used
x-travel:730 mmy-travel:510 mmz-travel:510 mmcontrol:Mori Seiki MSX 711 MAPPS 3turning speeds:12000 1/minspindle drive:22/18,5 kWc-axis:360.000 x 0,001° b-axis:+170.000/ -170.000x0,001° rapid travel x/y/z:50 / 50 / 40 m/minFeed x/y/z:50 / 50 / 40 m/mintable diameter:500 mmworkpiece height max.:450 mmmax. workpiece diameter:700 mmworkpiece weight:300 kgtool magazin::91 HSK-A 63 C-axis RPM:120 1/mintool diameter:80 mmTool diameter with no neighbouring tools:125 mmtool length - max.:300 mmTable sensor for tool setting and auto-measuring:Renishaw No. of free M-functions:10 Tool pairs for Tool life management:1024 dimensions of the machine ca.:2,8 x 4,5 x 3,1 mweight of the machine ca.:12 ttotal power requirement:54 kWoffsets for parts:54 No. of tool offset pairs:400 Full 5 axis universal high speed machining center with turning and swivelling table and vertical spindle.
New in: 2000
used
X-travel: 600mm, y-travel: 450mm, z-travel: 450mm, table dimensions: 800x450mm, max. rotational speed: 16,000/min, rapid traverse: 35,000mm/min, controls: HEIDENHAIN TNC 430M, connected load: 30kVA, length: 2150mm, width: 2360mm, height: 2700mm, weight: 6.5t, operational hours counter controls/ machine/ spindle: 44,884/ 44,079/ 12,762h.
New in: 1998
used
length:1400 mmwidth:1000 mmX-axis:1200 mmy-axis:1000 mmZ-axis:550 mmtool taper:HSK 63-A spindle turning speed range:100-15000 U/minYear: 1998Working time: 19185 hSpindel working time: NALast Service by Huron: 2006Power voltage: 3x400VAC ... more information
New in: 1977
used
Distance between the columns: 1700mm, table dimensions: 1000x1180mmm, max. load: 3t, length: 2600mm, width: 1900mm, height: 2660mm, weight: 10t, including documentation. ... more information
used
X-travel: 300mm, y-travel: 220mm, z-travel: 200mm, max. rotational speed: 6000/min, table dimensions: 500x220mm, connected load: 6kVA, weight: 1.3t, operational hours counter: 6807h, including various tool cones. ... more information
used
X-travel: 3660mm, y-travel: 1250mm, z-travel: 180mm, length: 5300mm, width: 2200mm, height: 2500mm, weight: 4.3t. ... more information
New in: 1990
used
used
drill diameter:5,,,,40 mmdrilling length:600 mmlip angle:90-150 °total power requirement:4,5 kWweight of the machine ca.:0,8 tdimensions of the machine ca.:2-2-2 mCNC programmable according to ISOPoint angle 90-140 degrees, disc stroke x 80mm y 80mmgrinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpmGrinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1Avyac grind / 4 faces gr. Cross for deep drill
New in: 1995
used
X-travel: 2200mm, y-travel: 1200mm, z-travel: 1000mm, table dimensions: 4000x800mm, number of tool slots: 30, spindle cone: SK50, spindle power: 30kW, controls: HEIDENHAIN CNC 415, length: 5290mm, width: 3450mm, height: 3500mm, weight: ca. 20t, operational hours counter: ca. 30,000h. ... more information
New in: 1970
used
Work spindle diameter: 110mm, work spindle: ISO 50, drilling depth: 710mm, face plate diameter: 530mm, max. turning diameter for facing: 1200mm, table dimensions: 1000x1120mm, rotational speed: 6-1250/min, with documentation and accessories, without hour meter, has been regularly serviced, on-site inspection is possible, available from May 2024.
New in: 1996
used
X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: NC + 2 pallet changers, controls: Heller uni-Pro CNC 90, the machine needs to be overhauled, a power module is defective, therefore Z-axis does not move, reference point approach not possible, with documentation. ... more information
New in: 2002
used
x-travel:2200/3400 mmy-travel:550 mmz-travel:510 mmtotal power requirement:36,8 kWtable length:3050 mmTraverse path can be used as a whole or divided into two areas for pendulum machining.3 axisHSK 100 ... more information
used
Number of tool slots: 30, connected load: 18kVA, controls: Fanuc O-M, with chip conveyor, was maintained regularly. ... more information
New in: 1993
used
X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible. ... more information
used
There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws. ... more information
New in: 1954
used
Rotational speed: 90-710/min, connected load: 12kW, can be inspected. ... more information
New in: 2008
used
x-travel:600 mmy-travel:655 mmz-travel:685 mmweight of the machine ca.:17 tdimensions of the machine ca.:4x3,1x3,1 m ... more information
New in: 1964
used